The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка  RSS
"FreeBSD на  Dell inspiron 5160 "
Вариант для распечатки  
Пред. тема | След. тема 
Форумы Карманные компьютеры и ноутбуки. (Public)
Изначальное сообщение [Проследить за развитием треда]

"FreeBSD на  Dell inspiron 5160 "  
Сообщение от ans email(ok) on 03-Ноя-05, 21:37 
Хочу установить :)

Кто-нибудь вообще использует FreeBSD  на ноутбуках Dell ??

Какие могут быть грабли ?

Если нужно более точную информацию(память проц и т д ) с радостью предоставлю
только скажите ! :)

Заранее благодарю за ответы

Высказать мнение | Ответить | Правка | Cообщить модератору

 Оглавление

Сообщения по теме [Сортировка по времени | RSS]


1. "FreeBSD на  Dell inspiron 5160 "  
Сообщение от ans email(??) on 07-Дек-05, 12:06 
Это ^^^^^^^^^^^^^^^^^^^^ сделал :)

Спасибо всем за ответы :)

вот в чём вопрос теперь


# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Mon Dec  5 04:51:37 YEKT 2005
    root@sc213:/usr/src/sys/i386/compile/DeLL
ACPI APIC Table: <DELL   CPi R  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz (2791.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x459d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,<b14>>
  Hyperthreading: 2 logical CPUs
real memory  = 536662016 (511 MB)
avail memory = 515833856 (491 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R  > on motherboard
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKH> irq 11 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 17 at device 1.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:11:43:61:8a:3e
pci2: <network> at device 2.0 (no driver attached)
cbb0: <TI4510 PCI-CardBus Bridge> at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xfaffb800-0xfaffbfff,0xfaff4000-0xfaff7fff irq 16 at device 4.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 4a:4f:c0:00:32:a1:34:30
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 17 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
> pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: vendor 0x1267 PS/2+USB Mouse, rev 1.10/22.55, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2791010565 Hz quality 800
Timecounters tick every 1.000 msec
battery0: critically low charge!
acd0: CDRW <PHILIPS CD-RW/DVD-ROM CDD5263/UD91> at ata0-master UDMA33
ad2: 76319MB <TOSHIBA MK8026GAX PA001G> at ata1-master UDMA100
Trying to mount root from ufs:/dev/ad2s1a


# pciconf -lv
hostb0@pci0:0:0:        class=0x060000 card=0x01961028 chip=0x35808086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface Bridge'
    class    = bridge
    subclass = HOST-PCI
none0@pci0:0:1: class=0x088000 card=0x01961028 chip=0x35848086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory Controller'
    class    = base peripheral
none1@pci0:0:3: class=0x088000 card=0x01961028 chip=0x35858086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process'
    class    = base peripheral
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x35818086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82852GME/PM Montara Virtual PCI to AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:        class=0x0c0300 card=0x01961028 chip=0x24c28086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:        class=0x0c0300 card=0x01961028 chip=0x24c48086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:        class=0x0c0300 card=0x01961028 chip=0x24c78086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:        class=0x0c0320 card=0x01961028 chip=0x24cd8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller'
    class    = serial bus
    subclass = USB
pcib2@pci0:30:0:        class=0x060400 card=0x00000000 chip=0x24488086 rev=0x81 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:      class=0x01018a card=0x01961028 chip=0x24ca8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
pcm0@pci0:31:5: class=0x040100 card=0x01961028 chip=0x24c58086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
> none2@pci0:31:6:        class=0x070300 card=0x4d6414e4 chip=0x24c68086   > rev=0x01 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem          >  Controller'
>    class    = simple comms
>    subclass = generic modem
none3@pci1:0:0: class=0x030000 card=0x01961028 chip=0x032410de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'NV31 nVidia GeForce FX Go 5200, 64MB'
    class    = display
    subclass = VGA
bfe0@pci2:1:0:  class=0x020000 card=0x01961028 chip=0x170c14e4 rev=0x02 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM440x 100Base-TX Fast Ethernet'
    class    = network
    subclass = ethernet
none4@pci2:2:0: class=0x028000 card=0x00031028 chip=0x432014e4 rev=0x03 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM4306 802.11b/g Wireless LAN Controller'
    class    = network
cbb0@pci2:4:0:  class=0x060700 card=0x01961028 chip=0xac44104c rev=0x02 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI4510SDFSDFSD PC Card Controller SDFSDAFSADFSDAFSDAF'
    class    = bridge
    subclass = PCI-CardBus
fwohci0@pci2:4:1:       class=0x0c0010 card=0x01961028 chip=0x8029104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = '??? OHCI Compliant IEEE-1394 FireWire Controller'
    class    = serial bus
    subclass = FireWire

как модем можно настроить ?

Я уже всё перелазил нечего толкового не нашёл :(

Подскажите пожалуйста

Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

2. "FreeBSD на  Dell inspiron 5160 "  
Сообщение от Юрий email(??) on 18-Фев-06, 12:10 
Не подскажите как можно апгрейдить inspiron5160 (какой макс процессор 3000 или 3200 , память , DVD-RW)?Может кто то уже это делал.

Зараннее спасибо за ответ

Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

3. "FreeBSD на  Dell inspiron 5160 "  
Сообщение от ans email(ok) on 29-Дек-07, 13:35 
>Не подскажите как можно апгрейдить inspiron5160 (какой макс процессор 3000 или 3200
>, память , DVD-RW)?Может кто то уже это делал.
>
>Зараннее спасибо за ответ

имхо.. лучше продать его :)

Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

Архив | Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ] [Рекомендовать для помещения в FAQ]




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру