URL: https://www.opennet.me/cgi-bin/openforum/vsluhboard.cgi
Форум: vsluhforumID1
Нить номер: 16631
[ Назад ]
Исходное сообщение
"прошу совета как установить две сетевухи на FreeBsd"
Отправлено qwerty , 25-Апр-02 13:42 
прошу совета как установить две сетевухи на FreeBsd
Материнка ASUS CUSL2
При загрузке системы обе платы появляются в списке обнаруженных устройств но при попытке использовать утилиту IFCONFIG этих устройств система не видит !!!!!!!
что делать ????

на другом компе (материнка ABIT ST6) все идет без прорблем

очень прошу дельных советов как выйти из этой ситуации
Опыт работы на фрюхе есть но такая ситуация у меня в первый раз ! В доках по этому поводу решений не нашел - ВЫ последняя надежда

Заранее ВСЕМ СПАСИБО !

Удачи

Содержание
Сообщения в этом обсуждении
"RE: прошу совета как установить две сетевухи на FreeBsd"
Отправлено brj , 25-Апр-02 13:48 
>прошу совета как установить две сетевухи
>на FreeBsd
>Материнка ASUS CUSL2

dmesg в студию, тфу... в форум.

А помоешь не раньше, чем я его увижу.

"Файл messages "
Отправлено qwerty , 25-Апр-02 13:59 
Apr 25 11:31:07  /kernel: Copyright (c) 1992-2001 The FreeBSD Project.
Apr 25 11:31:07  /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Apr 25 11:31:07  /kernel: The Regents of the University of California. All rights reserved.
Apr 25 11:31:07  /kernel: FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
Apr 25 11:31:07  /kernel: jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Apr 25 11:31:07  /kernel: Timecounter "i8254"  frequency 1193182 Hz
Apr 25 11:31:08  /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (908.95-MHz 686-class CPU)
Apr 25 11:31:08  /kernel: Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
Apr 25 11:31:08  /kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Apr 25 11:31:08  /kernel: real memory  = 133083136 (129964K bytes)
Apr 25 11:31:08  /kernel: avail memory = 125177856 (122244K bytes)
Apr 25 11:31:08  /kernel: Preloaded elf kernel "kernel" at 0xc044d000.
Apr 25 11:31:08  /kernel: Pentium Pro MTRR support enabled
Apr 25 11:31:08  /kernel: md0: Malloc disk
Apr 25 11:31:08  /kernel: npx0: <math processor> on motherboard
Apr 25 11:31:08  /kernel: npx0: INT 16 interface
Apr 25 11:31:08  /kernel: pcib0: <Host to PCI bridge> on motherboard
Apr 25 11:31:08  /kernel: pci0: <PCI bus> on pcib0
Apr 25 11:31:08  /kernel: pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 11
Apr 25 11:31:08  /kernel: pcib1: <PCI to PCI bridge (vendor=8086 device=244e)> at device 30.0 on pci0
Apr 25 11:31:08  /kernel: pci1: <PCI bus> on pcib1
Apr 25 11:31:08  /kernel: pci1: <unknown card> (vendor=0x134d, dev=0x7892) at 10.0
Apr 25 11:31:08  /kernel: rl0: <RealTek 8139 10/100BaseTX> at device 11.0 on pci1
Apr 25 11:31:08  /kernel: rl0: couldn't map ports/memory
Apr 25 11:31:08  /kernel: device_probe_and_attach: rl0 attach returned 6
Apr 25 11:31:08  /kernel: pci1: <unknown card> (vendor=0x1516, dev=0x0803) at 12.0
Apr 25 11:31:08  /kernel: pci1: <unknown card> (vendor=0x13f6, dev=0x0111) at 13.0
Apr 25 11:31:08  /kernel: isab0: <PCI to ISA bridge (vendor=8086 device=2440)> at device 31.0 on pci0
Apr 25 11:31:08  /kernel: isa0: <ISA bus> on isab0
Apr 25 11:31:08  /kernel: atapci0: <Intel ICH2 ATA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
Apr 25 11:31:08  /kernel: ata0: at 0x1f0 irq 14 on atapci0
Apr 25 11:31:08  /kernel: ata1: at 0x170 irq 15 on atapci0
Apr 25 11:31:08  /kernel: uhci0: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 5 at device 31.2 on pci0
Apr 25 11:31:08  /kernel: uhci0: (New UHCI DeviceId=0x24428086)
Apr 25 11:31:08  /kernel: usb0: <UHCI (generic) USB controller> on uhci0
Apr 25 11:31:08  /kernel: usb0: USB revision 1.0
Apr 25 11:31:08  /kernel: uhub0: (0x24428086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Apr 25 11:31:08  /kernel: uhub0: 2 ports with 2 removable, self powered
Apr 25 11:31:08  /kernel: ugen0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2
Apr 25 11:31:08  /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
Apr 25 11:31:08  /kernel: uhci1: <UHCI (generic) USB controller> port 0xa000-0xa01f irq 9 at device 31.4 on pci0
Apr 25 11:31:08  /kernel: uhci1: (New UHCI DeviceId=0x24448086)
Apr 25 11:31:08  /kernel: usb1: <UHCI (generic) USB controller> on uhci1
Apr 25 11:31:08  /kernel: usb1: USB revision 1.0
Apr 25 11:31:08  /kernel: uhub1: (0x24448086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Apr 25 11:31:08  /kernel: uhub1: 2 ports with 2 removable, self powered
Apr 25 11:31:08  /kernel: uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
Apr 25 11:31:08  /kernel: uhub2: 4 ports with 4 removable, self powered
Apr 25 11:31:08  /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Apr 25 11:31:08  /kernel: fdc0: FIFO enabled, 8 bytes threshold
Apr 25 11:31:08  /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Apr 25 11:31:08  /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Apr 25 11:31:08  /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Apr 25 11:31:08  /kernel: kbd0 at atkbd0
Apr 25 11:31:08  /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Apr 25 11:31:08  /kernel: psm0: model NetMouse/NetScroll Optical, device ID 0
Apr 25 11:31:08  /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Apr 25 11:31:08  /kernel: sc0: <System console> at flags 0x100 on isa0
Apr 25 11:31:08  /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Apr 25 11:31:08  /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Apr 25 11:31:08  /kernel: sio0: type 16550A
Apr 25 11:31:08  /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Apr 25 11:31:08  /kernel: sio1: type 16550A
Apr 25 11:31:08  /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Apr 25 11:31:08  /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Apr 25 11:31:08  /kernel: ppc0: FIFO with 16/16/9 bytes threshold
Apr 25 11:31:08  /kernel: plip0: <PLIP network interface> on ppbus0
Apr 25 11:31:08  /kernel: lpt0: <Printer> on ppbus0
Apr 25 11:31:08  /kernel: lpt0: Interrupt-driven port
Apr 25 11:31:08  /kernel: ppi0: <Parallel I/O> on ppbus0
Apr 25 11:31:08  /kernel: ad0: 19092MB <ST320410A> [38792/16/63] at ata0-master UDMA100
Apr 25 11:31:08  /kernel: acd0: CDROM <SONY CD-ROM CDU5221> at ata0-slave using PIO4
Apr 25 11:31:08  /kernel: Mounting root from ufs:/dev/ad0s3a
Apr 25 11:31:18  login: ROOT LOGIN (root) ON ttyv0
Apr 25 11:32:19  login: ROOT LOGIN (root) ON ttyv0
Apr 25 11:35:45  shutdown: shutdown by root:
Apr 25 11:35:47  syslogd: exiting on signal 15
Apr 25 11:36:04  login: ROOT LOGIN (root) ON ttyv0
Apr 25 11:42:30  reboot: rebooted by root
Apr 25 11:42:30  syslogd: exiting on signal 15
Apr 25 11:47:54  /kernel: Copyright (c) 1992-2001 The FreeBSD Project.
Apr 25 11:47:55  /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Apr 25 11:47:55  /kernel: The Regents of the University of California. All rights reserved.
Apr 25 11:47:55  /kernel: FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
Apr 25 11:47:55  /kernel: jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Apr 25 11:47:55  /kernel: Timecounter "i8254"  frequency 1193182 Hz
Apr 25 11:47:55  /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (908.95-MHz 686-class CPU)
Apr 25 11:47:55  /kernel: Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
Apr 25 11:47:55  /kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Apr 25 11:47:55  /kernel: real memory  = 133083136 (129964K bytes)
Apr 25 11:47:55  /kernel: avail memory = 125177856 (122244K bytes)
Apr 25 11:47:55  /kernel: Preloaded elf kernel "kernel" at 0xc044d000.
Apr 25 11:47:55  /kernel: Pentium Pro MTRR support enabled
Apr 25 11:47:55  /kernel: md0: Malloc disk
Apr 25 11:47:55  /kernel: npx0: <math processor> on motherboard
Apr 25 11:47:55  /kernel: npx0: INT 16 interface
Apr 25 11:47:55  /kernel: pcib0: <Host to PCI bridge> on motherboard
Apr 25 11:47:55  /kernel: pci0: <PCI bus> on pcib0
Apr 25 11:47:55  /kernel: pci0: <Intel model 1132 VGA-compatible display device> at 2.0
Apr 25 11:47:55  /kernel: pcib1: <PCI to PCI bridge (vendor=8086 device=244e)> at device 30.0 on pci0
Apr 25 11:47:55  /kernel: pci1: <PCI bus> on pcib1
Apr 25 11:47:55  /kernel: pci1: <unknown card> (vendor=0x134d, dev=0x7892) at 10.0
Apr 25 11:47:55  /kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xf6800000-0xf68000ff at device 11.0 on pci1
Apr 25 11:47:55  /kernel: rl0: couldn't map interrupt
Apr 25 11:47:55  /kernel: device_probe_and_attach: rl0 attach returned 6
Apr 25 11:47:55  /kernel: pci1: <unknown card> (vendor=0x1516, dev=0x0803) at 12.0
Apr 25 11:47:55  /kernel: pci1: <unknown card> (vendor=0x13f6, dev=0x0111) at 13.0
Apr 25 11:47:55  /kernel: isab0: <PCI to ISA bridge (vendor=8086 device=2440)> at device 31.0 on pci0
Apr 25 11:47:55  /kernel: isa0: <ISA bus> on isab0
Apr 25 11:47:55  /kernel: atapci0: <Intel ICH2 ATA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
Apr 25 11:47:55  /kernel: ata0: at 0x1f0 irq 14 on atapci0
Apr 25 11:47:55  /kernel: ata1: at 0x170 irq 15 on atapci0
Apr 25 11:47:55  /kernel: uhci0: <UHCI (generic) USB controller> port 0xa400-0xa41f at device 31.2 on pci0
Apr 25 11:47:55  /kernel: uhci0: Invalid irq 255
Apr 25 11:47:55  /kernel: uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
Apr 25 11:47:55  /kernel: device_probe_and_attach: uhci0 attach returned 6
Apr 25 11:47:55  /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3
Apr 25 11:47:55  /kernel: uhci0: <UHCI (generic) USB controller> port 0xa000-0xa01f at device 31.4 on pci0
Apr 25 11:47:55  /kernel: uhci0: Invalid irq 255
Apr 25 11:47:55  /kernel: uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
Apr 25 11:47:55  /kernel: device_probe_and_attach: uhci0 attach returned 6
Apr 25 11:47:55  /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Apr 25 11:47:55  /kernel: fdc0: FIFO enabled, 8 bytes threshold
Apr 25 11:47:55  /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Apr 25 11:47:55  /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Apr 25 11:47:55  /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Apr 25 11:47:55  /kernel: kbd0 at atkbd0
Apr 25 11:47:55  /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Apr 25 11:47:55  /kernel: psm0: model IntelliMouse, device ID 3
Apr 25 11:47:55  /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Apr 25 11:47:55  /kernel: sc0: <System console> at flags 0x100 on isa0
Apr 25 11:47:55  /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Apr 25 11:47:55  /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Apr 25 11:47:55  /kernel: sio0: type 16550A
Apr 25 11:47:55  /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Apr 25 11:47:55  /kernel: sio1: type 16550A
Apr 25 11:47:55  /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Apr 25 11:47:55  /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Apr 25 11:47:55  /kernel: ppc0: FIFO with 16/16/9 bytes threshold
Apr 25 11:47:55  /kernel: plip0: <PLIP network interface> on ppbus0
Apr 25 11:47:55  /kernel: lpt0: <Printer> on ppbus0
Apr 25 11:47:55  /kernel: lpt0: Interrupt-driven port
Apr 25 11:47:55  /kernel: ppi0: <Parallel I/O> on ppbus0
Apr 25 11:47:55  /kernel: ad0: 19092MB <ST320410A> [38792/16/63] at ata0-master UDMA100
Apr 25 11:47:55  /kernel: acd0: CDROM <SONY CD-ROM CDU5221> at ata0-slave using PIO4
Apr 25 11:47:55  /kernel: Mounting root from ufs:/dev/ad0s3a
Apr 25 11:49:15  login: ROOT LOGIN (root) ON ttyv0
Apr 25 11:50:23  reboot: rebooted by root
Apr 25 11:50:23  syslogd: exiting on signal 15
Apr 25 13:49:28  /kernel: Copyright (c) 1992-2001 The FreeBSD Project.
Apr 25 13:49:28  /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Apr 25 13:49:28  /kernel: The Regents of the University of California. All rights reserved.
Apr 25 13:49:28  /kernel: FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
Apr 25 13:49:28  /kernel: jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Apr 25 13:49:28  /kernel: Timecounter "i8254"  frequency 1193182 Hz
Apr 25 13:49:28  /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (908.95-MHz 686-class CPU)
Apr 25 13:49:28  /kernel: Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
Apr 25 13:49:28  /kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Apr 25 13:49:28  /kernel: real memory  = 133083136 (129964K bytes)
Apr 25 13:49:28  /kernel: avail memory = 125177856 (122244K bytes)
Apr 25 13:49:28  /kernel: Preloaded elf kernel "kernel" at 0xc044d000.
Apr 25 13:49:28  /kernel: Pentium Pro MTRR support enabled
Apr 25 13:49:28  /kernel: md0: Malloc disk
Apr 25 13:49:28  /kernel: npx0: <math processor> on motherboard
Apr 25 13:49:28  /kernel: npx0: INT 16 interface
Apr 25 13:49:28  /kernel: pcib0: <Host to PCI bridge> on motherboard
Apr 25 13:49:28  /kernel: pci0: <PCI bus> on pcib0
Apr 25 13:49:28  /kernel: pci0: <Intel model 1132 VGA-compatible display device> at 2.0
Apr 25 13:49:28  /kernel: pcib1: <PCI to PCI bridge (vendor=8086 device=244e)> at device 30.0 on pci0
Apr 25 13:49:28  /kernel: pci1: <PCI bus> on pcib1
Apr 25 13:49:28  /kernel: pci1: <unknown card> (vendor=0x134d, dev=0x7892) at 10.0
Apr 25 13:49:28  /kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xf6800000-0xf68000ff at device 11.0 on pci1
Apr 25 13:49:28  /kernel: rl0: couldn't map interrupt
Apr 25 13:49:28  /kernel: device_probe_and_attach: rl0 attach returned 6
Apr 25 13:49:28  /kernel: pci1: <unknown card> (vendor=0x1516, dev=0x0803) at 12.0
Apr 25 13:49:28  /kernel: pci1: <unknown card> (vendor=0x13f6, dev=0x0111) at 13.0
Apr 25 13:49:28  /kernel: isab0: <PCI to ISA bridge (vendor=8086 device=2440)> at device 31.0 on pci0
Apr 25 13:49:28  /kernel: isa0: <ISA bus> on isab0
Apr 25 13:49:28  /kernel: atapci0: <Intel ICH2 ATA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
Apr 25 13:49:28  /kernel: ata0: at 0x1f0 irq 14 on atapci0
Apr 25 13:49:28  /kernel: ata1: at 0x170 irq 15 on atapci0
Apr 25 13:49:28  /kernel: uhci0: <UHCI (generic) USB controller> port 0xa400-0xa41f at device 31.2 on pci0
Apr 25 13:49:28  /kernel: uhci0: Invalid irq 255
Apr 25 13:49:28  /kernel: uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
Apr 25 13:49:28  /kernel: device_probe_and_attach: uhci0 attach returned 6
Apr 25 13:49:28  /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3
Apr 25 13:49:28  /kernel: uhci0: <UHCI (generic) USB controller> port 0xa000-0xa01f at device 31.4 on pci0
Apr 25 13:49:28  /kernel: uhci0: Invalid irq 255
Apr 25 13:49:28  /kernel: uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
Apr 25 13:49:28  /kernel: device_probe_and_attach: uhci0 attach returned 6
Apr 25 13:49:28  /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Apr 25 13:49:28  /kernel: fdc0: FIFO enabled, 8 bytes threshold
Apr 25 13:49:28  /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Apr 25 13:49:28  /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Apr 25 13:49:28  /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Apr 25 13:49:28  /kernel: kbd0 at atkbd0
Apr 25 13:49:28  /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Apr 25 13:49:28  /kernel: psm0: model IntelliMouse, device ID 3
Apr 25 13:49:28  /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Apr 25 13:49:28  /kernel: sc0: <System console> at flags 0x100 on isa0
Apr 25 13:49:28  /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Apr 25 13:49:28  /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Apr 25 13:49:28  /kernel: sio0: type 16550A
Apr 25 13:49:28  /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Apr 25 13:49:28  /kernel: sio1: type 16550A
Apr 25 13:49:28  /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Apr 25 13:49:28  /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Apr 25 13:49:28  /kernel: ppc0: FIFO with 16/16/9 bytes threshold
Apr 25 13:49:28  /kernel: plip0: <PLIP network interface> on ppbus0
Apr 25 13:49:28  /kernel: lpt0: <Printer> on ppbus0
Apr 25 13:49:28  /kernel: lpt0: Interrupt-driven port
Apr 25 13:49:28  /kernel: ppi0: <Parallel I/O> on ppbus0
Apr 25 13:49:28  /kernel: ad0: 19092MB <ST320410A> [38792/16/63] at ata0-master UDMA100
Apr 25 13:49:28  /kernel: acd0: CDROM <SONY CD-ROM CDU5221> at ata0-slave using PIO4
Apr 25 13:49:28  /kernel: Mounting root from ufs:/dev/ad0s3a
Apr 25 13:49:35  login: ROOT LOGIN (root) ON ttyv0
Apr 25 13:50:27  reboot: rebooted by root
Apr 25 13:50:27  syslogd: exiting on signal 15
Apr 25 13:53:18  /kernel: Copyright (c) 1992-2001 The FreeBSD Project.
Apr 25 13:53:19  /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Apr 25 13:53:19  /kernel: The Regents of the University of California. All rights reserved.
Apr 25 13:53:19  /kernel: FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
Apr 25 13:53:19  /kernel: jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Apr 25 13:53:19  /kernel: Timecounter "i8254"  frequency 1193182 Hz
Apr 25 13:53:19  /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (908.95-MHz 686-class CPU)
Apr 25 13:53:19  /kernel: Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
Apr 25 13:53:19  /kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Apr 25 13:53:19  /kernel: real memory  = 133083136 (129964K bytes)
Apr 25 13:53:19  /kernel: avail memory = 125177856 (122244K bytes)
Apr 25 13:53:19  /kernel: Preloaded elf kernel "kernel" at 0xc044d000.
Apr 25 13:53:19  /kernel: Pentium Pro MTRR support enabled
Apr 25 13:53:19  /kernel: md0: Malloc disk
Apr 25 13:53:19  /kernel: npx0: <math processor> on motherboard
Apr 25 13:53:19  /kernel: npx0: INT 16 interface
Apr 25 13:53:19  /kernel: pcib0: <Host to PCI bridge> on motherboard
Apr 25 13:53:19  /kernel: pci0: <PCI bus> on pcib0
Apr 25 13:53:19  /kernel: pci0: <Intel model 1132 VGA-compatible display device> at 2.0
Apr 25 13:53:19  /kernel: pcib1: <PCI to PCI bridge (vendor=8086 device=244e)> at device 30.0 on pci0
Apr 25 13:53:19  /kernel: pci1: <PCI bus> on pcib1
Apr 25 13:53:19  /kernel: pci1: <unknown card> (vendor=0x134d, dev=0x7892) at 10.0
Apr 25 13:53:19  /kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xf6800000-0xf68000ff at device 11.0 on pci1
Apr 25 13:53:19  /kernel: rl0: couldn't map interrupt
Apr 25 13:53:19  /kernel: device_probe_and_attach: rl0 attach returned 6
Apr 25 13:53:19  /kernel: pci1: <unknown card> (vendor=0x1516, dev=0x0803) at 12.0
Apr 25 13:53:19  /kernel: pci1: <unknown card> (vendor=0x13f6, dev=0x0111) at 13.0
Apr 25 13:53:19  /kernel: isab0: <PCI to ISA bridge (vendor=8086 device=2440)> at device 31.0 on pci0
Apr 25 13:53:19  /kernel: isa0: <ISA bus> on isab0
Apr 25 13:53:19  /kernel: atapci0: <Intel ICH2 ATA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
Apr 25 13:53:19  /kernel: ata0: at 0x1f0 irq 14 on atapci0
Apr 25 13:53:19  /kernel: ata1: at 0x170 irq 15 on atapci0
Apr 25 13:53:19  /kernel: uhci0: <UHCI (generic) USB controller> port 0xa400-0xa41f at device 31.2 on pci0
Apr 25 13:53:19  /kernel: uhci0: Invalid irq 255
Apr 25 13:53:19  /kernel: uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
Apr 25 13:53:19  /kernel: device_probe_and_attach: uhci0 attach returned 6
Apr 25 13:53:19  /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3
Apr 25 13:53:19  /kernel: uhci0: <UHCI (generic) USB controller> port 0xa000-0xa01f at device 31.4 on pci0
Apr 25 13:53:19  /kernel: uhci0: Invalid irq 255
Apr 25 13:53:19  /kernel: uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
Apr 25 13:53:19  /kernel: device_probe_and_attach: uhci0 attach returned 6
Apr 25 13:53:19  /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Apr 25 13:53:19  /kernel: fdc0: FIFO enabled, 8 bytes threshold
Apr 25 13:53:19  /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Apr 25 13:53:19  /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Apr 25 13:53:19  /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Apr 25 13:53:19  /kernel: kbd0 at atkbd0
Apr 25 13:53:19  /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Apr 25 13:53:19  /kernel: psm0: model IntelliMouse, device ID 3
Apr 25 13:53:19  /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Apr 25 13:53:19  /kernel: sc0: <System console> at flags 0x100 on isa0
Apr 25 13:53:19  /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Apr 25 13:53:19  /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Apr 25 13:53:19  /kernel: sio0: type 16550A
Apr 25 13:53:19  /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Apr 25 13:53:19  /kernel: sio1: type 16550A
Apr 25 13:53:19  /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Apr 25 13:53:19  /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Apr 25 13:53:19  /kernel: ppc0: FIFO with 16/16/9 bytes threshold
Apr 25 13:53:19  /kernel: plip0: <PLIP network interface> on ppbus0
Apr 25 13:53:19  /kernel: lpt0: <Printer> on ppbus0
Apr 25 13:53:19  /kernel: lpt0: Interrupt-driven port
Apr 25 13:53:19  /kernel: ppi0: <Parallel I/O> on ppbus0
Apr 25 13:53:19  /kernel: ad0: 19092MB <ST320410A> [38792/16/63] at ata0-master UDMA100
Apr 25 13:53:19  /kernel: acd0: CDROM <SONY CD-ROM CDU5221> at ata0-slave using PIO4
Apr 25 13:53:19  /kernel: Mounting root from ufs:/dev/ad0s3a
Apr 25 13:53:26  login: ROOT LOGIN (root) ON ttyv0
Apr 25 13:54:24  login: ROOT LOGIN (root) ON ttyv1
"RE: Файл messages "
Отправлено tomikle , 25-Апр-02 14:46 
оду вижу
Apr 25 13:53:19  /kernel: rl0: <RealTek 8139 10/100BaseTX>  ....
а вот вторую нет, может быть это что нибудь из
Apr 25 13:53:19  /kernel: pci1: <unknown card> (vendor=0x1516, dev=0x0803) at 12.0
Apr 25 13:53:19  /kernel: pci1: <unknown card> (vendor=0x13f6, dev=0x0111) at 13.0

попробуй поставить второй картой тукую же <RealTek 8139 10/100BaseTX>  ..


"RE: Файл messages "
Отправлено qwerty , 25-Апр-02 15:06 
как я смогу вторую поставить если не могу даже первую запустить ?

"RE: Файл messages "
Отправлено lavr , 25-Апр-02 15:34 
>как я смогу вторую поставить если
>не могу даже первую запустить
>?

сконфигури setup'ом карты на свободные IRQ,
все лишние драйвера закоментируй

если не ошибаюсь что-то об этом есть:

http://unix1.jinr.ru/~lavr/FreeBSDR/

"RE: Файл messages "
Отправлено tomikle , 25-Апр-02 15:37 
>как я смогу вторую поставить если
>не могу даже первую запустить
>?
а че ifconfig говорит???

"Ничего ! нет таких устройств ......."
Отправлено qwerty , 25-Апр-02 16:22 
Я так подозреваю что идет конфликт на уровне прерываний
надо было ставить систему с конфигурацией ядра
"RE: Ничего ! нет таких устройств ......."
Отправлено lavr , 25-Апр-02 16:27 
>Я так подозреваю что идет конфликт
>на уровне прерываний
>надо было ставить систему с конфигурацией
>ядра

это делается в любой момент:

в момент ожидания - нажать любую клавишу,
после чего boot -c

"Отключил все устройства (имеюю ввиду в начальной загрузке)"
Отправлено qwerty , 25-Апр-02 17:34 
>в момент ожидания - нажать любую
>клавишу,
>после чего boot -c
и все равно ничего
хотя ядро рапортует что такая карта есть !
а IFCONFIG не видит ничего что надо
Чертовщина какая то .......


"RE: прошу совета как установить две сетевухи на FreeBsd"
Отправлено Y , 25-Апр-02 17:29 
Я всю жизнь токо мамами АСУС и пользуюсь
Почти все были, а вот проблем с ними никогда небыло
В CUSL-2 слоты PCI 1 и 5 используют одно прерывание, хоть для PCI одно прерывание на два устройства пофиг, всё-же если у тебя и 1 и 5 чем-то заняты, освободи одно из них
Надеюсь поможет
И посмотри всё ли у тебя впорядке в BIOS
"RE: прошу совета как установить две сетевухи на FreeBsd"
Отправлено Y , 25-Апр-02 17:30 
Я всю жизнь токо мамами АСУС и пользуюсь
Почти все были (Токо те, которые на Intel чипсетах), а вот проблем с ними никогда небыло
В CUSL-2 слоты PCI 1 и 5 используют одно прерывание, хоть для PCI одно прерывание на два устройства пофиг, всё-же если у тебя и 1 и 5 чем-то заняты, освободи одно из них
Надеюсь поможет
И посмотри всё ли у тебя впорядке в BIOS
"RE: прошу совета как установить две сетевухи на FreeBsd"
Отправлено anton , 25-Апр-02 18:26 
Ifconfig говорит что такой то интерфейс не поднят или что его вопще нет?


"RE: прошу совета как установить две сетевухи на FreeBsd"
Отправлено Mikka , 26-Апр-02 09:21 
Была у меня такая трабла. Решается просто - найди в BIOS параметр PnP Enabled или PnP OS installed.. И выключи нафик. Попробуй ;-)))
(На Асусах это кажется меню Power Managment)
"пробовал с самого начала - не помогло"
Отправлено qwerty , 26-Апр-02 09:50 
>Была у меня такая трабла. Решается
>просто - найди в BIOS
>параметр PnP Enabled или PnP
>OS installed.. И выключи нафик.
>Попробуй ;-)))
>(На Асусах это кажется меню Power
>Managment)


"ifconfig вообще не видит таких интерфейсов"
Отправлено qwerty , 26-Апр-02 09:46 
>Ifconfig говорит что такой то интерфейс
>не поднят или что его
>вопще нет?
ifconfig вообще не видит таких интерфейсов
стандартные типа лпт ком и др. есть


"RE: ifconfig вообще не видит таких интерфейсов"
Отправлено Mikka , 26-Апр-02 10:01 
Он и не будет его видеть, ведь -
Apr 25 13:53:19  /kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xf6800000-0xf68000ff at device 11.0 on pci1
Apr 25 13:53:19  /kernel: rl0: couldn't map interrupt

Драйвера не могут подхавтить карточку.
Так что, не помогло отключение PnP?

"RE: ifconfig вообще не видит таких интерфейсов"
Отправлено lavr , 26-Апр-02 10:29 
>>Ifconfig говорит что такой то интерфейс
>>не поднят или что его
>>вопще нет?
>ifconfig вообще не видит таких интерфейсов
>
>стандартные типа лпт ком и др.
>есть

поехали дальше:

cat /etc/rc.conf