Добрый день.

FreeBSD 4.4 + S3 (Trio64+ 1MB) + X 4... из дистрибутива

Чего-то X не заводятся хотя вроде делаю как написано в www.opennet.ru/openforum/vsluhforumID1/2655.html
да и родную доку нашел.

yandex и rambler тоже мучал по этой теме...

всё равно ерунда какая-то...

<del>
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0

Fatal server error:
AddScreen/ScreenInit failed for driver 0

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

X connection to :0.0 broken (explicit kill or server shutdown).
<del>

конфиг:
XF86config

<del>

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "compaq"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5 - 64.3

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 40-150
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1280x1024" 13 128 1312 141 1664 1024 1027 1030 1064
Modeline "640x480" 45.8 6 0 672 768 864 480 488 494 530 -hsync -vsync
Modeline "800x600" 36 8 102 600 601 603 625
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
Identifier "s3"
Driver "vga"
# unsupported card
VideoRam 1024
# Use Option "nolinear" if the server doesn't start up correctly
# (this avoids the linear framebuffer probe). If that fails try
# option "nomemaccess".
#
# Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page.
# Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "s3"
Monitor "compaq"
DefaultDepth 16

Subsection "Display"
Depth 8
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480"
ViewPort 0 0
EndSubsection
EndSection

<del>

то же происходит и с s3 Savage 4 16MB...

что интересно, так это то что с помощью xf86cfg заводиться но всё жутко тормозит и глючит, вот что генерится с помощью этой тулзы:

<del>
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "S3"
BoardName "Trio32/64"
BusID "PCI:0:16:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
<del>

ставлю nVidia Riva TNT2Pro всё бегом заводиться.

Может чё-то я недопонимаю, подскажите где ошибка или киньте кусок вашего конфига с S3 сюда или на мыло zeroj@mailru.com

• RE: FreeBSD + S3 + X 4....,togkskbr, 14:45 , 17-Дек-02
  • RE: FreeBSD + S3 + X 4....,lavr, 16:23 , 17-Дек-02

и тишина... обидно

>и тишина... обидно

s3 заводится с пол-пинка в XFree86 4.2.x, все что нужно сделать, это
запустить xf86config и задать все что нужно.