Господа, пропадаю с VPN. Без шифрования все работает. XP коннектиться к RH9. Винда пишет Локальный компьютер не поддерживает требуемый тип шифрования. pptpd 1.1.4-b4, KernelMod v0.7.1 установил. pppd-2.4.2-b3. Правда не назодятся иодули ppp-compress-18,19,20,21. ppp-mppe, kernel-mppe, тоже вроде есть...вроде, мож надо как то проверить. Линукс пишет
pptpd[1546]: CTRL: Client 192.168.xx.xx control connection started
pptpd[1546]: CTRL: Starting call (launching pppd, opening GRE)
pppd[1547]: pppd 2.4.2b3 started by root, uid 0
pppd[1547]: Using interface ppp0
pppd[1547]: Connect: ppp0 <--> /dev/pts/1
pptpd[1546]: GRE: Discarding duplicate packet
pgfa /etc/hotplug/net.agent: assuming ppp0 is already up
pppd[1547]: peer refused to authenticate: terminating link
pptpd[1546]: CTRL: Ignored a SET LINK INFO packet with real ACCMs!
pppd[1547]: Connection terminated.
pptpd[1546]: CTRL: Client 192.168.xx.xx control connection finished
pppd[1547]: Exit.
/etc/hotplug/net.agent: NET unregister event not supported
Иногда ругается на отсутствие ppp-compress-21
Конфиги покаж!
options.pptpd
## CHANGE TO SUIT YOUR SYSTEM
lock## turn pppd syslog debugging on
#debug## change 'pptpd' to whatever you specify as your server name in chap-secrets
name pptpdproxyarp
bsdcomp 0# This option applies if you use ppp with chapms-strip-domain patch
#chapms-strip-domain# These options apply if you use ppp with mppe patch
# NB! You should also apply the ChapMS-V2 patch
#-chap
#-chapms
#+chapms-v2
#mppe-128
#mppe-stateless# These options will tell ppp to pass on these to your clients
# To use ms-wins or ms-dns in options.pptpd it must exist in /etc/resolv.conf
#ms-wins your.server.here
#ms-dns your.server.here
pptpd.conf
# TAG: speed
#
# Specifies the speed for the PPP daemon to talk at.
#
#speed 115200
#speed 115200# TAG: option
#
# Specifies the location of the PPP options file.
# By default PPP looks in '/etc/ppp/options'
#
#option /etc/ppp/options.pptpd
option /etc/ppp/options.pptpd# TAG: stimeout
#
# Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10# TAG: debug
#
# Turns on (more) debugging to syslog
#
#debug
debug# TAG: bcrelay <if>
#
# Turns on broadcast relay to clients from interface <if>
# Not yet implemented this way. Read README.bcrelay
#
#bcrelay eth1# TAG: localip
# TAG: remoteip
#
# Specifies the local and remote IP address ranges.
#
# You can specify single IP addresses seperated by commas or you can
# specify ranges, or both. For example:
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than MAX_CONNECTIONS, it will
# start at the beginning of the list and go until it gets
# MAX_CONNECTIONS IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
#localip 192.168.0.1
#remoteip 192.168.0.234-238,192.168.0.245
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245
localip 192.168.0.1
remoteip 192.168.0.2-4
а что прописано в modules.confmppe загружается ?
>а что прописано в modules.conf
>
>mppe загружается ?alias eth0 8139too
alias eth1 8139too
alias eth2 8139too
alias eth3 8139too
alias usb-controller usb-uhci
alias char-major-108 ppp_generic
alias ppp-compress-128 mppe
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
Если запустить modinfo ppp_mppe то выдает данные, а вот modinfo ppp-compress-18 почему то нет