URL: https://www.opennet.me/cgi-bin/openforum/vsluhboard.cgi
Форум: vsluhforumID1
Нить номер: 55460
[ Назад ]

Исходное сообщение
"Проблема с mpd."
Отправлено bvm , 12-Апр-05 15:29

У меня диал-ап. Питаюсь законектится к провайдеру. Все вроде настроено хорошо, но почемуто не работает.
Вот лог:
Multi-link PPP for FreeBSD, by Archie L. Cobbs.
Based on iij-ppp, by Toshiharu OHNO.
mpd: pid 6510, version 3.18 (root@bvm.if.ua 11:27 12-Apr-2005)
[intsv0] ppp node is "mpd6510-intsv0"
[intsv0] using interface ng1
mpd: bad IP address "0.0.0.0/0"
[intsv0] IPCP: peer address cannot be zero
[intsv0:link0] open
[intsv0] IFACE: Open event
[intsv0] IPCP: Open event
[intsv0] IPCP: state change Initial --> Starting
[intsv0] IPCP: LayerStart
[intsv0:link0] [intsv0] bundle: OPEN event in state CLOSED
[intsv0] opening link "link0"...
[link0] link: OPEN event
[link0] LCP: Open event
[link0] LCP: state change Initial --> Starting
[link0] LCP: LayerStart
[link0] device: OPEN event in state DOWN
[link0] device is now in state OPENING
[link0] chat: Dialing p9771938...
[link0] chat: Connected at 21600.
[link0] chat script succeeded
[link0] device: UP event in state OPENING
[link0] device is now in state UP
[link0] link: UP event
[link0] link: origination is local
[link0] LCP: Up event
[link0] LCP: state change Starting --> Req-Sent
[link0] LCP: phase shift DEAD --> ESTABLISH
[link0] LCP: SendConfigReq #1
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM ad84b5be
[link0] LCP: rec'd Configure Request #0 link 0 (Req-Sent)
ACCMAP 0x00000000
AUTHPROTO CHAP MSOFTv2
MAGICNUM 5c2b3d83
PROTOCOMP
ACFCOMP
CALLBACK
   Not supported
MP MRRU 1614
ENDPOINTDISC [LOCAL] 33 4f c9 46 09 02 4f 37 82 3f 69 50 6e 2e 3f be 00 00 00 00
BACP
   Not supported
[link0] LCP: SendConfigRej #0
CALLBACK
MP MRRU 1614
BACP
[link0] LCP: rec'd Configure Ack #1 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM ad84b5be
[link0] LCP: state change Req-Sent --> Ack-Rcvd
[link0] LCP: rec'd Configure Request #1 link 0 (Ack-Rcvd)
ACCMAP 0x00000000
AUTHPROTO CHAP MSOFTv2
MAGICNUM 5c2b3d83
PROTOCOMP
ACFCOMP
ENDPOINTDISC [LOCAL] 33 4f c9 46 09 02 4f 37 82 3f 69 50 6e 2e 3f be 00 00 00 00
[link0] LCP: SendConfigAck #1
ACCMAP 0x00000000
AUTHPROTO CHAP MSOFTv2
MAGICNUM 5c2b3d83
PROTOCOMP
ACFCOMP
ENDPOINTDISC [LOCAL] 33 4f c9 46 09 02 4f 37 82 3f 69 50 6e 2e 3f be 00 00 00 00
[link0] LCP: state change Ack-Rcvd --> Opened
[link0] LCP: phase shift ESTABLISH --> AUTHENTICATE
[link0] LCP: auth: peer wants CHAP, I want nothing
[link0] LCP: LayerUp
[link0] CHAP: rec'd CHALLENGE #0
Name: "USERGATE"
Using authname "bvm"
[link0] CHAP: sending RESPONSE
[link0] CHAP: rec'd SUCCESS #0
MESG: S=39BDF14B0020E80B009923F3B480A44A0F8E8CDE
[link0] LCP: authorization successful
[link0] LCP: phase shift AUTHENTICATE --> NETWORK
[intsv0] setting interface ng1 MTU to 1500 bytes
[intsv0] up: 1 link, total bandwidth 28800 bps
[intsv0] IPCP: Up event
[intsv0] IPCP: state change Starting --> Req-Sent
[intsv0] IPCP: SendConfigReq #1
IPADDR 0.0.0.0
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[intsv0] CCP: Open event
[intsv0] CCP: state change Initial --> Starting
[intsv0] CCP: LayerStart
[intsv0] CCP: Up event
[intsv0] CCP: state change Starting --> Req-Sent
[intsv0] CCP: SendConfigReq #1
[link0] CCP: Checking whether 40 bits are enabled -> no
[link0] CCP: Checking whether 56 bits are enabled -> no
[link0] CCP: Checking whether 128 bits are enabled -> yes
MPPC
   0x01000040: MPPE, 128 bit, stateless
[intsv0] ECP: Open event
[intsv0] ECP: state change Initial --> Starting
[intsv0] ECP: LayerStart
[intsv0] ECP: Up event
[intsv0] ECP: state change Starting --> Req-Sent
[intsv0] ECP: SendConfigReq #1
[link0] LCP: rec'd Protocol Reject #3 link 0 (Opened)
[link0] LCP: protocol ECP was rejected
[intsv0] ECP: protocol was rejected by peer
[intsv0] IPCP: failed to negotiate required encryption
[intsv0] IPCP: state change Req-Sent --> Stopped
[intsv0] IPCP: LayerFinish
[intsv0] ECP: state change Req-Sent --> Stopped
[intsv0] ECP: LayerFinish
[intsv0] bundle: CLOSE event in state OPENED
[intsv0] closing link "link0"...
[link0] link: CLOSE event
[link0] LCP: Close event
[link0] LCP: state change Opened --> Closing
[link0] LCP: phase shift NETWORK --> TERMINATE
[intsv0] setting interface ng1 MTU to 1500 bytes
[intsv0] up: 0 links, total bandwidth 9600 bps
[intsv0] IPCP: Down event
[intsv0] IPCP: state change Stopped --> Starting
[intsv0] IPCP: LayerStart
[intsv0] CCP: Down event
[intsv0] CCP: state change Req-Sent --> Starting
[intsv0] CCP: Close event
[intsv0] CCP: state change Starting --> Initial
[intsv0] CCP: LayerFinish
[intsv0] ECP: Down event
[intsv0] ECP: state change Stopped --> Starting
[intsv0] ECP: LayerStart
[intsv0] ECP: Close event
[intsv0] ECP: state change Starting --> Initial
[intsv0] ECP: LayerFinish
[intsv0] closing link "link0"...
[link0] LCP: SendTerminateReq #2
[link0] LCP: LayerDown
[intsv0] bundle: OPEN event in state CLOSED
[intsv0] opening link "link0"...
[link0] link: CLOSE event
[link0] LCP: Close event
[link0] link: OPEN event
[link0] LCP: Open event
[link0] LCP: state change Closing --> Stopping
[link0] rec'd proto CCP during terminate phase
[link0] rec'd proto IPCP during terminate phase
[link0] LCP: rec'd Terminate Ack #2 link 0 (Stopping)
[link0] LCP: state change Stopping --> Stopped
[link0] LCP: phase shift TERMINATE --> ESTABLISH
[link0] LCP: LayerFinish
[link0] device: CLOSE event in state UP
[link0] device is now in state CLOSING
[link0] device: DOWN event in state CLOSING
[link0] device is now in state DOWN
[link0] link: DOWN event
[link0] LCP: Down event
[link0] LCP: state change Stopped --> Starting
[link0] LCP: phase shift ESTABLISH --> DEAD
[link0] LCP: LayerStart
[link0] device: OPEN event in state DOWN
[link0] pausing 9 seconds before open
[link0] device is now in state DOWN
[link0] device: OPEN event in state DOWN
[link0] device is now in state DOWN
^Cmpd: caught fatal signal int
mpd: fatal error, exiting
[intsv0] IPCP: Down event
[intsv0] IFACE: Close event
[intsv0] IPCP: Close event
[intsv0] IPCP: state change Starting --> Initial
[intsv0] IPCP: LayerFinish
Что делать?

Содержание

Проблема с mpd.,denn, 15:41 , 12-Апр-05
- Проблема с mpd.,bvm, 15:59 , 12-Апр-05
  - Проблема с mpd.,denn, 16:15 , 12-Апр-05
    - Проблема с mpd.,bvm, 16:21 , 12-Апр-05
Проблема с mpd.,bvm, 16:03 , 12-Апр-05
Проблема с mpd.,gnus, 15:23 , 19-Апр-05

Сообщения в этом обсуждении

"Проблема с mpd."
Отправлено denn , 12-Апр-05 15:41

failed to negotiate required encryption
еще б конфы увидеть

"Проблема с mpd."
Отправлено bvm , 12-Апр-05 15:59

>failed to negotiate required encryption
>
>еще б конфы увидеть
http://bvm.iatp.org.ua/mpd/mpd.log - Лог
http://bvm.iatp.org.ua/mpd/mpd.conf - Конфиг
http://bvm.iatp.org.ua/mpd/mpd.links - Линки
http://bvm.iatp.org.ua/mpd/mpd.script - Скрипт

"Проблема с mpd."
Отправлено denn , 12-Апр-05 16:15

>>failed to negotiate required encryption
>>
>>еще б конфы увидеть
>
>http://bvm.iatp.org.ua/mpd/mpd.log - Лог
>http://bvm.iatp.org.ua/mpd/mpd.conf - Конфиг
>http://bvm.iatp.org.ua/mpd/mpd.links - Линки
>http://bvm.iatp.org.ua/mpd/mpd.script - Скрипт
set link keep-alive 0 0
тк я смотрю через некоторое время после конекта рвет, да?

"Проблема с mpd."
Отправлено bvm , 12-Апр-05 16:21

>тк я смотрю через некоторое время после конекта рвет, да?
нет, оно не конектитс, после того что в логах модем тухнет...
Что делать?

"Проблема с mpd."
Отправлено bvm , 12-Апр-05 16:03

При подключение у Windows XP у меня все так:
******************
Имя устройства: GVC K2D
Тип устройства: modem
Тип сервера: PPP
Транспорти: TCP/IP
Проверка поддлинности: MS CHAP V2
Шифрование: MPPPE 128
Сжатие: MPPC
Формирование пакетов: Вкл
ІР адрес сервера: ХХХ.ХХХ.ХХХ.ХХХ
ІР адрес клиента: ХХХ.ХХХ.ХХХ.ХХХ
******************

"Проблема с mpd."
Отправлено gnus , 19-Апр-05 15:23

>mpd: bad IP address "0.0.0.0/0"
для начала:
в настройках свой адрес можешь не указывать, но адрес того к кому конектишься указать должен!