Помогите разобраться с установкой MPD. Что не так делаю?
Заранее спасибо за помощь!
__________________________
содержание mpd.conf

default:
        load client1
        load client2

    client1:
        new pptp0 pptp0
        set iface disable on-demand
        set iface idle 1800
        set bundle disable multilink
        set link yes acfcomp protocomp
        set link no pap chap
        set link enable chap
        set link keep-alive 10 60
        set ipcp yes vjcomp
        set ipcp ranges 10.10.10.10/32 10.10.10.11/32
        set ipcp dns 10.10.10.10
client2:
        new pptp1 pptp1
        set iface disable on-demand
        set iface idle 1800
        set bundle disable multilink
        set link yes acfcomp protocomp
        set link no pap chap
        set link enable chap
        set link keep-alive 10 60
        set ipcp yes vjcomp
        set ipcp ranges 10.10.10.10/32 10.10.10.12/32
        set ipcp dns 10.10.10.10

__________________________

вот mpd.links
pptp0:
        set link type pptp
        set pptp self xx.xx.xx.xx
        set pptp enable incoming
        set pptp disable originate
pptp1:
        set link type pptp
        set pptp self xx.xx.xx.xx
        set pptp enable incoming
        set pptp disable originate

__________________________
mpd.secret:
user1 "12345678" 10.10.10.11
__________________________

В ipfw открыл 1723 порт на вход и выход.
При попытке соединения выдается ошибка 619 Указанный порт не подключен

Вот это пишет в лог файл
Jan  5 00:49:20 post mpd: [pptp1] LCP: state change Req-Sent --> Stopped
Jan  5 00:49:20 post mpd: [pptp1] LCP: LayerFinish
Jan  5 00:49:20 post mpd: [pptp1] LCP: parameter negotiation failed
Jan  5 00:49:20 post mpd: [pptp1] LCP: LayerFinish
Jan  5 00:49:20 post mpd: [pptp1] device: CLOSE event in state UP
Jan  5 00:49:20 post mpd: pptp0-0: clearing call
Jan  5 00:49:20 post mpd: pptp0-0: killing channel
Jan  5 00:49:20 post mpd: [pptp1] PPTP call terminated
Jan  5 00:49:20 post mpd: [pptp1] IFACE: Close event
Jan  5 00:49:20 post mpd: [pptp1] IPCP: Close event
Jan  5 00:49:20 post mpd: [pptp1] IPCP: state change Starting --> Initial
Jan  5 00:49:20 post mpd: [pptp1] IPCP: LayerFinish
Jan  5 00:49:20 post mpd: [pptp1] IFACE: Close event
Jan  5 00:49:20 post mpd: pptp0: closing connection with 212.188.104.96:1204
Jan  5 00:49:20 post mpd: [pptp1] IFACE: Close event
Jan  5 00:49:20 post mpd: [pptp1] device is now in state CLOSING
Jan  5 00:49:20 post mpd: [pptp1] bundle: CLOSE event in state OPENED
Jan  5 00:49:20 post mpd: [pptp1] closing link "pptp1"...
Jan  5 00:49:20 post mpd: [pptp1] device: CLOSE event in state CLOSING
Jan  5 00:49:20 post mpd: [pptp1] device is now in state CLOSING
Jan  5 00:49:20 post mpd: [pptp1] link: CLOSE event
Jan  5 00:49:20 post mpd: [pptp1] LCP: Close event
Jan  5 00:49:20 post mpd: [pptp1] LCP: state change Stopped --> Closed
Jan  5 00:49:20 post mpd: [pptp1] device: DOWN event in state CLOSING
Jan  5 00:49:20 post mpd: [pptp1] device is now in state DOWN
Jan  5 00:49:20 post mpd: [pptp1] link: DOWN event
Jan  5 00:49:20 post mpd: [pptp1] LCP: Down event
Jan  5 00:49:20 post mpd: [pptp1] LCP: state change Closed --> Initial
Jan  5 00:49:20 post mpd: [pptp1] LCP: phase shift ESTABLISH --> DEAD
Jan  5 00:49:20 post mpd: [pptp1] device: DOWN event in state DOWN
Jan  5 00:49:20 post mpd: [pptp1] device is now in state DOWN
Jan  5 00:49:20 post mpd: [pptp1] link: DOWN event
Jan  5 00:49:20 post mpd: [pptp1] LCP: Down event
Jan  5 00:49:20 post mpd: pptp0: killing connection with 212.188.104.96:1204

• Помогите разобраться с установкой MPD,kir, 21:01 , 05-Янв-06

настройки не все половинчатые какие то