URL: https://www.opennet.me/cgi-bin/openforum/vsluhboard.cgi
Форум: vsluhforumID1
Нить номер: 72474
[ Назад ]

Исходное сообщение
"mpd4 + клиентв на linux"

Отправлено weldpua2008 , 25-Фев-07 23:09 
Привет Всем
Как прикрутить к mpd4{4.0b4, 4.1} - linux клиентов?
Виндовс ХР нормально крутиться...
Linux - конектится, поднимается ppp0...
in 42byte
out возростающее количество Мб

вот конфиг mpd.conf:
default:
        load pptp0
pptp0:
    new -i ng00 pptp0 pptp0
    set ipcp ranges  10.11.25.1/24  192.168.11.1/32
    load pptp_standart
pptp_standart:
    set iface route default
    set iface disable on-demand
    set bundle enable multilink
    set link yes acfcomp protocomp
    set iface up-script "/usr/local/etc/mpd4/link-up"
    set iface down-script "/usr/local/etc/mpd4/link-down"
    set link no pap chap
    set link enable chap
    set link keep-alive 30 60
    set ipcp yes vjcomp
    set ipcp dns 10.11.25.1
    set ccp yes mppc
    set ccp yes mpp-e40
    set ccp yes mpp-e56
    set ccp yes mpp-e128
    set ccp yes mpp-stateless
    set pptp enable incoming
    set pptp disable originate
    set radius me 127.0.0.1
    set radius retries 2
    set radius server 127.0.0.1 PASSWORD 1812 1813
    set radius timeout 5
    set auth acct-update 300
    set auth enable radius-auth
    set auth enable radius-acct


Содержание

Сообщения в этом обсуждении
"mpd4 + клиентв на linux"
Отправлено weldpua2008 , 25-Фев-07 23:13 
PPTP connection from 10.11.25.252 2308
pptp0: attached to connection with 10.11.25.252 2308
[pptp0] Accepting PPTP connection
[pptp0] opening link "pptp0"...
[pptp0] link: OPEN event
[pptp0] LCP: Open event
[pptp0] LCP: state change Initial --> Starting
[pptp0] LCP: LayerStart
[pptp0] attaching to peer's outgoing call
[pptp0] link: UP event
[pptp0] link: origination is remote
[pptp0] LCP: Up event
[pptp0] LCP: state change Starting --> Req-Sent
[pptp0] LCP: SendConfigReq #1
  ACFCOMP
  PROTOCOMP
   MRU 1500
   MAGICNUM a8e39964
   AUTHPROTO CHAP MSOFTv2
   MP MRRU 1600
   MP SHORTSEQ
   ENDPOINTDISC [802.1] 00 11 2f a8 ce 0e
  [pptp0] LCP: rec'd Configure Request #1 link 0 (Req-Sent)
   ACCMAP 0x00000000
   MAGICNUM 18971521
  PROTOCOMP
  ACFCOMP
  [pptp0] LCP: SendConfigAck #1
  ACCMAP 0x00000000
  MAGICNUM 18971521
  PROTOCOMP
  ACFCOMP
[pptp0] LCP: state change Req-Sent --> Ack-Sent
[pptp0] LCP: rec'd Configure Reject #1 link 0 (Ack-Sent)
MP MRRU 1600
MP SHORTSEQ
[pptp0] LCP: SendConfigReq #2
  ACFCOMP
  PROTOCOMP
MRU 1500
  MAGICNUM a8e39964
AUTHPROTO CHAP MSOFTv2
[pptp0] LCP: SendConfigReq #3
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM a8e39964
  AUTHPROTO CHAP MSOFTv2
[pptp0] LCP: rec'd Configure Ack #3 link 0 (Ack-Sent)
  ACFCOMP
  PROTOCOMP
   MRU 1500
  MAGICNUM a8e39964
  AUTHPROTO CHAP MSOFTv2
[pptp0] LCP: state change Ack-Sent --> Opened
[pptp0] LCP: auth: peer wants nothing, I want CHAP
  [pptp0] CHAP: sending CHALLENGE len:17
  [pptp0] LCP: LayerUp
[pptp0] CHAP: rec'd RESPONSE #1
  Name: "nemo"
[pptp0] AUTH: Auth-Thread started
  [pptp0] AUTH: Trying RADIUS
  [pptp0] RADIUS: RadiusAuthenticate for: nemo
  [pptp0] RADIUS: rec'd RAD_ACCESS_ACCEPT for user nemo
[pptp0] AUTH: RADIUS returned authenticated
  [pptp0] AUTH: Auth-Thread finished normally
  [pptp0] CHAP: ChapInputFinish: status authenticated
  [pptp0] CHAP: sending SUCCESS len:42
[pptp0] LCP: authorization successful
[pptp0] Bundle up: 1 link, total bandwidth 64000 bps
  [pptp0] IPCP: Open event
[pptp0] IPCP: state change Initial --> Starting
[pptp0] IPCP: LayerStart
  [pptp0] IPCP: Up event
  [pptp0] IPCP: state change Starting --> Req-Sent
  [pptp0] IPCP: SendConfigReq #1
   IPADDR 10.11.25.1
   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
  [pptp0] IPCP: rec'd Configure Request #1 link 0 (Req-Sent)
   COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
   IPADDR 0.0.0.0
     NAKing with 192.168.12.1
  [pptp0] IPCP: SendConfigNak #1
   IPADDR 192.168.12.1
  [pptp0] IPCP: rec'd Configure Ack #1 link 0 (Req-Sent)
   IPADDR 10.11.25.1
   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
  [pptp0] IPCP: state change Req-Sent --> Ack-Rcvd
  [pptp0] IPCP: rec'd Configure Request #2 link 0 (Ack-Rcvd)
   COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
  IPADDR 192.168.12.1
     192.168.12.1 is OK
  [pptp0] IPCP: SendConfigAck #2
   COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
  IPADDR 192.168.12.1
  [pptp0] IPCP: state change Ack-Rcvd --> Opened
[pptp0] IPCP: LayerUp
    10.11.25.1 -> 192.168.12.1
[pptp0] AUTH: Accounting-Thread started
[pptp0] RADIUS: RadiusAccount for: nemo (Type: 1)
[pptp0] RADIUS: rec'd RAD_ACCOUNTING_RESPONSE for user nemo
  [pptp0] no interface to proxy arp on for 192.168.12.1
[pptp0] IFACE: Up event
[pptp0] AUTH: Accounting-Thread finished normally
  pptp0-0: call cleared by peer
  pptp0-0: killing channel
  [pptp0] PPTP call terminated
  pptp0: closing connection with 10.11.25.252 2308
  pptp0: read: Connection reset by peer
  pptp0: killing connection with 10.11.25.252 2308
  [pptp0] link: DOWN event
  [pptp0] LCP: Close event
  [pptp0] LCP: state change Opened --> Closing
  [pptp0] AUTH: Accounting data for user nemo: 23 seconds, 189 octets in, 2octets out
  [pptp0] AUTH: Cleanup
  [pptp0] Bundle up: 0 links, total bandwidth 9600 bps
[pptp0] IPCP: Close event
[pptp0] IPCP: state change Opened --> Closing
[pptp0] IPCP: SendTerminateReq #2
  [pptp0] error writing len 8 frame to bypass: Network is down
  [pptp0] IPCP: LayerDown
  [pptp0] AUTH: Accounting-Thread started
  [pptp0] RADIUS: RadiusAccount for: nemo (Type: 2)
  [pptp0] RADIUS: Termination cause: Dropped, RADIUS: 2
  [pptp0] RADIUS: rec'd RAD_ACCOUNTING_RESPONSE for user nemo
  [pptp0] IFACE: Down event
[pptp0] IPCP: Down event
[pptp0] IPCP: LayerFinish
  [pptp0] No NCPs left. Closing links...
  [pptp0] closing link "pptp0"...
  [pptp0] IPCP: state change Closing --> Initial
[pptp0] LCP: SendTerminateReq #4
[pptp0] error writing len 8 frame to bypass: Network is down
[pptp0] LCP: LayerDown
  [pptp0] LCP: Down event
  [pptp0] LCP: LayerFinish
[pptp0] LCP: state change Closing --> Initial
  [pptp0] link: CLOSE event
[pptp0] LCP: Close event
  [pptp0] AUTH: Accounting-Thread finished normally

"mpd4 + клиентв на linux"
Отправлено weldpua2008 , 26-Фев-07 14:19 
HELP ME

"mpd4 + клиентв на linux"
Отправлено weldpua2008 , 27-Фев-07 01:18 
>HELP ME

Вот чего Я достиг:
Конект нормальный: Debian 4.0 <--> FreeBSD6.2RC1+mpd4.1
но Инета нет...
Вешаю :
tcpdump -i ng0
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on ng0, link-type NULL (BSD loopback), capture size 96 bytes
23:47:59.471504 IP k152-XX.saltov.net > ya.ru: ICMP echo request, id 53259, seq 16, length 64
23:48:00.471208 IP k152-XX.saltov.net > ya.ru: ICMP echo request, id 53259, seq 17, length 64
23:48:01.471045 IP k152-XX.saltov.net > ya.ru: ICMP echo request, id 53259, seq 18, length 64

mpd.conf:

pptp100:
        new -i ng100 pptp100 pptp100
        set ipcp ranges 192.168.11.1/32 192.168.11.101/32
        load pptp_standart

pptp_standart:
    set pptp disable windowing
    set iface route default
    set iface disable on-demand
    #
    set iface enable tcpmssfix
    #
    set bundle disable multilink
    set link yes acfcomp protocomp
    set iface up-script "/usr/local/etc/mpd4/link-up"
    set iface down-script "/usr/local/etc/mpd4/link-down"
    set link no pap chap
    set link enable chap
    set link keep-alive 10 75
    set ipcp yes vjcomp
    set ipcp dns 10.11.25.1
#    set link mtu 1460
#    set link mru 1460
    set iface enable proxy-arp
    set bundle enable compression
    set ccp yes mppc
    set ccp yes mpp-e40
#    set ccp yes mpp-e56
    set ccp yes mpp-e128
    set ccp yes mpp-stateless
    set pptp enable incoming
    set pptp disable originate
#   set radius config /opt/radius.conf
    set radius me 127.0.0.1
    set radius retries 2
    set radius server 127.0.0.1 password 1812 1813
    set radius timeout 5
    set auth acct-update 300
    set auth enable radius-auth
    set auth enable radius-acct
#    set ipcp yes radius-ip
#   set iface route

mpd.links:
pptp100:
        set link type pptp

Конект есть, а Инета нету :(


"mpd4 + клиентв на linux"
Отправлено weldpua2008 , 27-Фев-07 08:47 
Проверяюна винде - все ОК..

"mpd4 + клиентв на linux"
Отправлено mmihail , 20-Янв-11 13:09 
> Проверяюна винде - все ОК..

default route проверь после коннекта наверняка не меняешь просто


"mpd4 + клиентв на linux"
Отправлено weldpua2008 , 20-Янв-11 20:38 
>> Проверяюна винде - все ОК..
> default route проверь после коннекта наверняка не меняешь просто

некрофил)))