Вот конфиг:
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=777
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default.  These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/vsftpd.pem
chmod_enable=YES
user_config_dir=/etc/vsftpd/vusers
#в конфигах юзеров вроде все верно
Папки и файлы загружаються и выгружаються(аплоад\довнлоад) на ура но удалить нельзя
те возникает
DELE vsftpd.conf
550 Delete operation failed.

Помогите разобраться
версия всфтпд:
2.0.5

• vsftpd 550 del directory failed,Medlar, 16:52 , 29-Май-07
• vsftpd 550 del directory failed,idle, 17:36 , 29-Май-07
  • vsftpd 550 del directory failed,faddistr, 19:17 , 30-Май-07
    • vsftpd 550 del directory failed,faddistr, 19:40 , 30-Май-07
      • vsftpd 550 del directory failed,uboot, 14:44 , 17-Май-11
        • vsftpd 550 del directory failed,Avari, 16:27 , 18-Авг-11

local_umask=777
не дает никаких прав никому

У вас же там написано в конфиге:
#Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)

rmdir directory

Терь возникла каардинально противоположная проблема Слишком много прав и юзверя галимый по всему серверу гуляюют конфиг такойже тока local_umask=022

>Терь возникла каардинально противоположная проблема Слишком много прав и юзверя галимый по
>всему серверу гуляюют конфиг такойже тока local_umask=022

Все разобрался local_umask=077

Всем доброго времени суток,

такая же проблема возникла:
очень похожий конфиг vsftpd:

listen=YES
listen_ipv6=NO
background=YES
ftpd_banner=FTP server
nopriv_user=_vsftpd
secure_chroot_dir=/var/empty
max_clients=20
max_per_ip=10
local_max_rate=0
anon_max_rate=0
pasv_enable=YES
pasv_min_port=40000
pasv_max_port=41000
userlist_enable=YES
userlist_deny=NO
userlist_file=/etc/ftpusers.allow
syslog_enable=YES
dual_log_enable=YES
xferlog_file=/var/log/xferlog
log_ftp_protocol=NO
local_enable=YES
anonymous_enable=NO
chroot_local_user=YES
chroot_list_enable=NO
check_shell=YES
local_umask=077
write_enable=YES

заливаем с Маков каталог,
а когда хотим каталог этот удалить - все удаляется окромя самих каталогов
и дело в том, что в них остаются скрытые файлы типа .DS_Store, которые не видать ФТП клиентом и не удалить!
пока их рутом не удалишь в каталоге/подкаталогах каталог не удалится пользователем.
С виндой такой проблемы не наблюдается

игры с умаской - ничего не дали

> и дело в том, что в них остаются скрытые файлы типа .DS_Store,
> которые не видать ФТП клиентом и не удалить!
> пока их рутом не удалишь в каталоге/подкаталогах каталог не удалится пользователем.
> С виндой такой проблемы не наблюдается

Так это проблемы ftp-клиента, а не сервера...
lftp, например, отлично видит файлы с точкой. И удаляет, естественно.

> игры с умаской - ничего не дали

И не должны были дать. Если в директории хоть что-то есть - rm (без параметров ;) её удалять не будет. Так задумано.