Уважаемый All!
Возникла необходимость поднять FreeBSD на сервере HP.
ЖЕЛЕЗО:
Сервер - HP Proliant ML150 G3 / Xeon 1.6 MHz, 1024М оперативки, 2 винта 160G.
DKVM-4K - Длинковский свичер клавиатуры/мыши/монитора.Пробовал следующие релизы 5.5, 6.0, 6.2, 7-БЕТА1
Cитуация следующая:
при попытке загрузится с CD FreeBSD 5.5 - столбняк.
Boot Loader Found.
далее висим.релиз 6.0 - ставится, перезагрузка - double fault (более подробно, к сожалению, воспроизвести не могу, не с работы пишу) :(
ядро GENERIC, в момент usbd4: waiting for bios give up controls - монитор гаснет, ничего в логах нету.релиз 6.2 - ставится, ядро SMP, при первой перезагрузке пишет - double fault.
далее всё вроде нормально, но в момент загрузки драйвера клавиатуры kbd - всё гаснет :(
иногда загрузка клавы проходит, всё запускается, но при попытке переключения Alt+F1, Alt+F2... клава ведет себя неадекватно (залипание клавиш, непонятный вывод на экран, тормоза между переключениями консолей). Вырубал нафиг длинк свичер - такая же ситуация.релиз 7-БЕТА1 - тут вообще очень интересно, иногда останавливается как релиз 6.0 иногда на клавиатуре как 6.2. по умолчанию грузит ядро SMP. Hyper Threading - определятся нормально (вроде).
доки, форумы читал - решить проблему не смог. Помогите, плиз, может кто сталкивался с такой бедой.
раид аппаратный включал/выключал - результат нулевой.
/boot/devices.hints
acpi.0(1).disabled=0(1)
вкл./выкл. - пробовал - бестолку.в биосе строку про консоль 8042 (написано, что для установки RedHat Linux x64 нужно выключить)- включал, выключал - не помогло.
биос обновил - не помогло.
НР официально поддерживает RedHat, Suse и прочее... Их поставить не предлагать, хочу FreeBSD :)
Надеюсь на Вашу помощь, Олег aka Rolling
>релиз 7-БЕТА1 - тут вообще очень интересно, иногда останавливается как релиз 6.0
>иногда на клавиатуре как 6.2. по умолчанию грузит ядро SMP. Hyper
>Threading - определятся нормально (вроде).Покажите /var/run/dmesg.boot загрузки при boot -v (или 5-ый пункт меню).
>>релиз 7-БЕТА1 - тут вообще очень интересно, иногда останавливается как релиз 6.0
>>иногда на клавиатуре как 6.2. по умолчанию грузит ядро SMP. Hyper
>>Threading - определятся нормально (вроде).
>
>Покажите /var/run/dmesg.boot загрузки при boot -v (или 5-ый пункт меню).Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b63000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b631b0.
Calibrating clock(s) ... i8254 clock: 1193199 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1595935542 Hz
CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (1595.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1072824320 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000003ecdbfff, 1040924672 bytes (254132 pages)
avail memory = 1040650240 (992 MB)
MP Configuration Table version 1.4 found at 0xc009bd71
Table 'FACP' at 0x3ff26e13
Table 'SPMI' at 0x3ff26e97
Table 'SPCR' at 0x3ff26ed8
Table 'APIC' at 0x3ff26f28
MADT: Found table at 0x3ff26f28
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <HP ML150 G3>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f6080
bios32: Entry = 0xfd350 (c00fd350) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd350+0x471
pnpbios: Found PnP BIOS data at 0xc00f6120
pnpbios: Entry = f0000:b8f1 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
------------------- skip ------------------------------------ar0: 152627MB <Intel MatrixRAID RAID1> status: READY
ar0: 312581805 sectors [19457C/255H/63S] <> subdisks defined as:
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 0ar0: 152627MB <Intel MatrixRAID RAID1> status: READY
ar0: 312581805 sectors [19457C/255H/63S] <> subdisks defined as:
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 0
INTR: Assigning IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 1
INTR: Assigning IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
INTR: Assigning IRQ 15 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 1
INTR: Assigning IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 0
INTR: Assigning IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 1
INTR: Assigning IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 0
INTR: Assigning IRQ 23 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 1
GEOM: new disk ar0
Trying to mount root from ufs:/dev/ar0s1a
start_init: trying /sbin/init
лог к сожалению от 6.2, ведут они с 7-бета одинаково практически. никакого криминала я не разглядел
>лог к сожалению от 6.2, ведут они с 7-бета одинаково практически. никакого
>криминала я не разгляделГм.. А зачем -skip- ? тут ничего интересного..
>>лог к сожалению от 6.2, ведут они с 7-бета одинаково практически. никакого
>>криминала я не разглядел
>
>Гм.. А зачем -skip- ? тут ничего интересного..Вот полностью лог:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b63000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b631b0.
Calibrating clock(s) ... i8254 clock: 1193199 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1595935542 Hz
CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (1595.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1072824320 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000003ecdbfff, 1040924672 bytes (254132 pages)
avail memory = 1040650240 (992 MB)
MP Configuration Table version 1.4 found at 0xc009bd71
Table 'FACP' at 0x3ff26e13
Table 'SPMI' at 0x3ff26e97
Table 'SPCR' at 0x3ff26ed8
Table 'APIC' at 0x3ff26f28
MADT: Found table at 0x3ff26f28
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <HP ML150 G3>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f6080
bios32: Entry = 0xfd350 (c00fd350) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd350+0x471
pnpbios: Found PnP BIOS data at 0xc00f6120
pnpbios: Entry = f0000:b8f1 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec80000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd0 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jan 12 2007 11:05:04)
npx0: INT 16 interface
acpi0: <HP> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25d48086)
pcibios: BIOS version 2.10
Found $PIR table, 27 entries at 0xc00fde10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12
embedded 0 2 A 0x62 3 4 5 6 7 9 10 11 12
embedded 0 2 B 0x63 3 4 5 6 7 9 10 11 12
embedded 0 2 C 0x60 3 4 5 6 7 9 10 11 12
embedded 0 2 D 0x61 3 4 5 6 7 9 10 11 12
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12
embedded 1 0 C 0x62 3 4 5 6 7 9 10 11 12AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd8a90000 pa 0x9a000
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 5 6 7 10 11 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 5 6 7 10 11 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 5 6 7 10 11 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 5 6 7 10 11 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 5 6 7 10 11 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 5 6 7 10 11 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 5 6 7 10 11 15
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x25d4, revid=0x93
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25f7, revid=0x93
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25e3, revid=0x93
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x93
bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x93
bus=0, slot=16, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x93
bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f1, revid=0x93
bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f3, revid=0x93
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f3, revid=0x93
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f5, revid=0x93
bus=0, slot=21, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f6, revid=0x93
bus=0, slot=22, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2690, revid=0x09
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2688, revid=0x09
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2689, revid=0x09
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x268a, revid=0x09
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x268b, revid=0x09
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 00001860, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x268c, revid=0x09
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dfb00000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xd9
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2670, revid=0x09
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x269e, revid=0x09
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001880, size 4, enabled
found-> vendor=0x8086, dev=0x2680, revid=0x09
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 000018c8, size 3, enabled
map[14]: type 4, range 32, base 000018ac, size 2, enabled
map[18]: type 4, range 32, base 000018c0, size 3, enabled
map[1c]: type 4, range 32, base 000018a8, size 2, enabled
map[20]: type 4, range 32, base 000018b0, size 4, enabled
map[24]: type 1, range 32, base dfb00400, size 10, memory disabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 4
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1found-> vendor=0x8086, dev=0x3500, revid=0x01
bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x350c, revid=0x01
bus=1, slot=0, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 3
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x8086, dev=0x3510, revid=0x01
bus=2, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfff00000-0xfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
pcib5: <PCI-PCI bridge> at device 3.0 on pci0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci5: <PCI bus> on pcib5
pci5: physical bus=5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib6: secondary bus 6
pcib6: subordinate bus 6pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xfff00000-0xfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfb00000-0xdfb003ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdfb00000
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xdf000000-0xdf8fffffpcib7: memory decode 0xdf000000-0xdf8fffff
pcib7: prefetched decode 0xde000000-0xdeffffff
pcib7: Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
found-> vendor=0x14e4, dev=0x16a7, revid=0x02
bus=7, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base df800000, size 16, enabled
pcib7: (null) requested memory range 0xdf800000-0xdf80ffff: good
pcib7: matched entry for 7.1.INTA
pcib7: slot 1 INTA hardwired to IRQ 18
found-> vendor=0x102b, dev=0x0522, revid=0x02
bus=7, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 3, range 32, base de000000, size 24, enabled
pcib7: (null) requested memory range 0xde000000-0xdeffffff: good
map[14]: type 1, range 32, base df810000, size 14, enabled
pcib7: (null) requested memory range 0xdf810000-0xdf813fff: good
map[18]: type 1, range 32, base df000000, size 23, enabled
pcib7: (null) requested memory range 0xdf000000-0xdf7fffff: good
pcib7: matched entry for 7.2.INTA
pcib7: slot 2 INTA hardwired to IRQ 18
bge0: <Broadcom BCM5703 A2, ASIC rev. 0x1002> mem 0xdf800000-0xdf80ffff irq 18 at device 1.0 on pci7
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf800000
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:18:fe:79:18:16
bge0: [MPSAFE]
pci7: <display, VGA> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1880
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54
ata1: [MPSAFE]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf mem 0xdfb00400-0xdfb007ff irq 19 at de
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x18c8
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x18ac
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x18c0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x18a8
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
acpi_button0: <Power Button> on acpi0
sio0: irq maps: 0x4ca9 0x4cb9 0x4ca9 0x4ca9
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devicesisa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xdc000-0xdffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> failed to probe at port 0x60,0x64 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4ca9 0x4ca9 0x4ca9 0x4ca9
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ukbd0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ums0: 8 buttons and Z dir.
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 132994339 hz
Timecounter "TSC" frequency 1595935542 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: setting PIO4 on 63XXESB2 chip
acd0: setting UDMA33 on 63XXESB2 chip
acd0: <HL-DT-ST RW/DVD GCC-4482B/2.02> CDRW drive at ata0 as master
acd0: read 8251KB/s (8251KB/s) write 8251KB/s (8251KB/s), 1536KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levelsacd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 152627MB <Seagate ST3160812AS 3.AJJ> at ata2-master SATA150
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
********* ATA Intel MatrixRAID Metadata *********
intel_id <Intel Raid ISM Cfg Sig. >
version <1.1.00>
checksum 0x406e959b
config_size 0x000001e0
config_id 0x471c6d07
generation 0x00000001
total_disks 2
total_volumes 1
DISK# serial disk_sectors disk_id flags
0 <4LS5EW8P> 312581805 0x00000000 0x0000000a
1 <5LS70YTL> 312581805 0x00010000 0x0000000a
name
total_sectors 312581805
state 12
reserved 0
offset 0
disk_sectors 312581805
stripe_count 19536362
stripe_sectors 8
status 0
type RAID1
total_disks 2
magic[0] 0x02
magic[1] 0xff
magic[2] 0x01
disk 0 at disk_idx 0x00000000
disk 1 at disk_idx 0x00000001
=================================================
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad6: 152627MB <Seagate ST3160812AS 3.AJJ> at ata3-master SATA150
ad6: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
********* ATA Intel MatrixRAID Metadata *********
intel_id <Intel Raid ISM Cfg Sig. >
version <1.1.00>
checksum 0x406e959b
config_size 0x000001e0
config_id 0x471c6d07
generation 0x00000001
total_disks 2
total_volumes 1DISK# serial disk_sectors disk_id flags
0 <4LS5EW8P> 312581805 0x00000000 0x0000000a
1 <5LS70YTL> 312581805 0x00010000 0x0000000a
name
total_sectors 312581805
state 12
reserved 0
offset 0
disk_sectors 312581805
stripe_count 19536362
stripe_sectors 8
status 0
type RAID1
total_disks 2
magic[0] 0x02
magic[1] 0xff
magic[2] 0x01
disk 0 at disk_idx 0x00000000
disk 1 at disk_idx 0x00000001
=================================================
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format Intel MatrixRAID
type RAID1
flags 0x01 1<READY>
magic_0 0x00000000471c6d07
magic_1 0x0000000000000000
generation 1
total_sectors 312581805
offset_sectors 0
heads 255
sectors 63
cylinders 19457
width 1
interleave 8
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 312581805
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 312581805
=================================================
ar0: 152627MB <Intel MatrixRAID RAID1> status: READY
ar0: 312581805 sectors [19457C/255H/63S] <> subdisks defined as:
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 0ar0: 152627MB <Intel MatrixRAID RAID1> status: READY
ar0: 312581805 sectors [19457C/255H/63S] <> subdisks defined as:
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 0
INTR: Assigning IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 1
INTR: Assigning IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
INTR: Assigning IRQ 15 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 1
INTR: Assigning IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 0
INTR: Assigning IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 1
INTR: Assigning IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 0
INTR: Assigning IRQ 23 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 1
GEOM: new disk ar0
Trying to mount root from ufs:/dev/ar0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed