Доброго времени суток!
Столкнулся с проблемой...
уже полтора месяца бьюсь с ней и всё никак.
Есть ось freebsd 6.3 и из портов поставленный hylafax 4.3.0. Пытаюсь сделать так, чтобы проигрывалось звуковое сообщение при посылке факса аля "примите факс пжалста". Перерыл весь сайт hyalfax'a но не нашел ответа на свой вопрос.
Модем IDC-5614BXL.
Конфиги:
/var/spool/hyalfax/etc/setup.cache
--------
# Warning, this file was automatically generated by faxsetup
# on Mon Jan 21 16:59:44 MSK 2008 for root
AWK='/usr/local/bin/gawk'
BIN='/usr/local/bin'
CAT='/bin/cat'
CHARSET='us-ascii'
CHGRP='/usr/bin/chgrp'
CHMOD='/bin/chmod'
CHOWN='/usr/sbin/chown'
CP='/bin/cp'
DPSRIP='/usr/local/sbin/ps2fax.exe'
ECHO='/bin/echo'
ENCODING='base64'
FAXQ_SERVER='yes'
FONTPATH='/usr/local/share/ghostscript/8.15/lib:/usr/local/share/ghostscript/8.15/Resource:/usr/local/share/ghostscript/fonts'
FUSER='fuser'
GREP='/usr/bin/grep'
GSRIP='/usr/local/bin/gs'
HFAXD_OLD_PROTOCOL='no'
HFAXD_SERVER='yes'
HFAXD_SNPP_SERVER='no'
IMPRIP='/usr/lib/print/psrip'
LIBDATA='/usr/local/lib/fax'
LIBEXEC='/usr/local/sbin'
LN='/bin/ln'
MANDIR='/usr/local/man'
MIMENCODE='base64-encode'
MKFIFO='/usr/bin/mkfifo'
MV='/bin/mv'
PATH='/usr/sbin:/bin:/usr/bin:/etc:/usr/local/bin'
PATHEGETTY='/bin/egetty'
PATHGETTY='/usr/local/sbin/mgetty'
PATHVGETTY='/usr/local/sbin/vgetty'
PSPACKAGE='gs'
RM='/bin/rm'
SBIN='/usr/local/sbin'
SCRIPT_SH='/usr/local/bin/bash'
SED='/usr/bin/sed'
SENDMAIL='/usr/sbin/sendmail'
SPOOL='/var/spool/hylafax'
SYSVINIT=''
TARGET='i386-unknown-freebsd6.2'
TIFF2PDF='/usr/local/bin/tiff2pdf'
TIFFBIN='/usr/local/bin'
TTYCMD='/usr/bin/tty'
UUCP_LOCKDIR='/var/spool/lock'
UUCP_LOCKTYPE='ascii'
UUENCODE='/usr/bin/uuencode'
-----------------------------------------------
/var/spool/hylafax/etc/config.cuad0
-----------------
#
# Generic Class 2 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode: 7
AreaCode: 812
FAXNumber: +1.999.555.1212
LongDistancePrefix: 8
InternationalPrefix: 10
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0644
LogFileMode: 0644
DeviceMode: 0644
RingsBeforeAnswer: 1
SpeakerVolume: on
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "NothingSetup"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use this to supply a hint
#ModemRate: 19200 # max rate for DCE-DTE communication
#ModemFlowControl: xonxoff # XON/XOFF flow control assumed
#ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
#ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
#
# We can append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer. This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
#
ModemDialCmd: ATS7=50\nAT&K3#CLS=8\nAT#VRN=0#VBT=1\nAT#VSR=11025\nAT#VBS=8\nATDP%s<waitfor:VCON>\nAT#VLS=4\nAT#VTX\n<waitfor:CONNECT><play:1><waitfor:OK> # T for tone dialing
#
# Other possible configuration stuff. The default strings are
# shown below. Only those that are different from the defaults
# need to be included in the configuration file.
#
#ModemResetCmds: "" # stuff to do when modem is reset
ModemAnswerCmd: ATA\nATS7=50\nAT$K3#CLS=8\nAT#VRN=0#VBT=1\nAT#VSR=7200\nAT#VBS=8\n<waitfor:VCON>\nAT#VLS=4\nAT#VTX\n<waitfor:CONNECT><play:1><waitfor:OK> # use this to answer phone
#ModemNoFlowCmd: AT&K # disable flow control cmd
#ModemHardFlowCmd: AT&K3 # hardware flow control cmd
#ModemSoftFlowCmd: AT&K4 # software flow control cmd
#ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd: ATE0 # disable command echo
#ModemVerboseResultsCmd: ATV1 # enable verbose command results
#ModemResultCodesCmd: ATQ0 # enable result codes
#ModemOnHookCmd: ATH0 # place phone on hook (hangup)
#ModemSoftResetCmd: ATZ # do soft reset of modem
#ModemSoftResetCmdDelay: 3000 # pause after soft reset
#ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier
#ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2 seconds
#ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
#ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit
#
# Configuration parameters for Class 2 modems.
#
Class2Cmd: AT#FCLASS=2
Class2BORCmd: AT+FBOR=0 # bit order for phase B/C/D (direct)
Class2RELCmd: AT+FREL=1 # byte-align EOL codes on recv
Class2CQCmd: "" # commands to enable copy quality proc.
Class2AbortCmd: AT+FK # abort session command
Class2CQQueryCmd: AT+FCQ=? # query for copy quality capabilities
Class2DCCQueryCmd: AT+FDCC=? # query for modem capabilities
Class2TBCCmd: AT+FTBC=0 # setup stream mode
Class2CRCmd: AT+FCR=1 # enable capability to receive
Class2PHCTOCmd: AT+FPHCTO=30 # set phase C timeout parameter
Class2BUGCmd: AT+FBUG=1 # enable HDLC frame tracing
Class2LIDCmd: AT+FLID # set local identifier command
Class2DCCCmd: AT+FDCC # set modem capabilities command
Class2DISCmd: AT+FDIS # set session parameters command
Class2DDISCmd: "" # disable pre-dial DIS command hack
Class2CIGCmd: AT+FCIG # set polling identifier command
Class2PTSCmd: AT+FPTS # set post-page status command
Class2SPLCmd: AT+FSPL # set polling indicator command
#
# If Class2RecvDataTrigger is not set, then it is set to DC1
#
Class2RecvDataTrigger: "" # character sent to modem to start recv
Class2XmitWaitForXON: yes # if true, wait for XON before send
-----------------------------------Пытался сделать так, как написано тут: http://www.hylafax.org/archive/2006-07/msg00174.php
не получается пустить голос при отсылке факса :(
может кто-нибудь сталкивался с такой проблемой? или работал с войсовыми модемами?
>может кто-нибудь сталкивался с такой проблемой? или работал с войсовыми модемами?hylafax5+