При компиляции ядра вылазиет такое, хотя таких параметров в конфиг файле вообще нет, что делать подскажите.
ichss.o(.text+0x7fa): In function `ichss_identify`
undefined reference to `pci_find_bsf`
smist.o(.text+0x8d9): In function `smist_identify`
undefined reference to `pci_find_device`
local_apic.o(.text+0x103c): In function `apic_setup_io`
undefined reference to `msi_init`
nexus.o(.text+0x27): In function `nexus_map_msi`
undefined reference to `msi_map`
>При компиляции ядра вылазиет такое, хотя таких параметров в конфиг файле вообще
>нет, что делать подскажите.
>ichss.o(.text+0x7fa): In function `ichss_identify`
>undefined reference to `pci_find_bsf`
>smist.o(.text+0x8d9): In function `smist_identify`
>undefined reference to `pci_find_device`
>local_apic.o(.text+0x103c): In function `apic_setup_io`
>undefined reference to `msi_init`
>nexus.o(.text+0x27): In function `nexus_map_msi`
>undefined reference to `msi_map`rm -rf /
система? полный текст ошибки??
>[оверквотинг удален]
>>undefined reference to `pci_find_bsf`
>>smist.o(.text+0x8d9): In function `smist_identify`
>>undefined reference to `pci_find_device`
>>local_apic.o(.text+0x103c): In function `apic_setup_io`
>>undefined reference to `msi_init`
>>nexus.o(.text+0x27): In function `nexus_map_msi`
>>undefined reference to `msi_map`
>
>rm -rf /
>система? полный текст ошибки??злой ты
>При компиляции ядра вылазиет такое, хотя таких параметров в конфиг файле вообще
>нет, что делать подскажите.
>ichss.o(.text+0x7fa): In function `ichss_identify`
>undefined reference to `pci_find_bsf`
>smist.o(.text+0x8d9): In function `smist_identify`
>undefined reference to `pci_find_device`
>local_apic.o(.text+0x103c): In function `apic_setup_io`
>undefined reference to `msi_init`
>nexus.o(.text+0x27): In function `nexus_map_msi`
>undefined reference to `msi_map`что менял в GENERIC?
кофн файл
mashine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident kernel# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
#options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
#options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFSLOCKD # Network Lock Manager
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
#options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
#options COMPAT_FREEBSD4 # Compatible with FreeBSD4
#options COMPAT_FREEBSD4 # Compatible with FreeBSD4
#options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extension
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT # Security event auditing
#options KDTRACE_HOOKS # Kernel DTrace hooks
options INCLUDE_CONFIG_FILE # Include this file in kernel# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC# CPU frequency control
device cpufreq# Bus support.
#device eisa
#device pci# Floppy drives
#device fdc# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
#device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#device ahd # AHA39320/29320 and onboard AIC79xx devices#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
#device amd # AMD 53C974 (Tekram DC-390(T))
#device hptiop # Highpoint RocketRaid 3xxx series
#device isp # Qlogic family
##device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `
#device trm # Tekram DC395U/UW/F DC315U adapters#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50# SCSI peripherals
#device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mousedevice kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc#device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus# Serial (COM) ports
#device sio # 8250, 16[45]50 based serial ports
#device uart # Generic UART driver# Parallel port
#device ppc
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 Gigabit Ethernet Family
#device igb # Intel PRO/1000 PCIE Server Gigabit Family
#device ixgb # Intel PRO/10GbE Ethernet Card
#device le # AMD Am7900 LANCE and Am79C9xx PCnet
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
#device miibus # MII bus support
#device age # Attansic/Atheros L1 Gigabit Ethernet
#device alc # Atheros AR8131/AR8132 Ethernet
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device et # Agere ET1310 10/100/Gigabit Ethernet
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nfe # nVidia nForce MCP on-board Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet# Wireless NIC cards
device wlan # 802.11 support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP supportdevice wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device wlan_scan_ap # 802.11 AP mode scanning
device wlan_scan_sta # 802.11 STA mode scanning
device an # Aironet 4500/4800 802.11 wireless NICs.
#device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
device ath_rate_sample # SampleRate tx rate control for ath
device awi # BayStack 660 and others
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.# Pseudo devices.
device loop # Network loopback
#device random # Entropy devicedevice ether # Ethernet support
device vlan # 802.1Q VLAN support
#device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Serial devices
device ucom # Generic com ttys
#device uark # Technologies ARK3116 based serial adapters
#device ubsa # Belkin F5U103 and compatible serial adapters
#device ubser # BWCT console serial adapters
#device uftdi # For FTDI usb serial adapters
#device uipaq # Some WinCE based devices
#device uplcom # Prolific PL-2303 serial adapters
#device uslcom # SI Labs CP2101/CP2102 serial adapters
#device uvisor # Visor and Palm devices
#device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
# USB Wireless
device rum # Ralink Technology RT2501USB wireless NICs
device ural # Ralink Technology RT2500USB wireless NICs# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
#device fwip # IP over FireWire (RFC 2734,3146)
#device dcons # Dumb console driver
#device dcons_crom # Configuration ROM for dcons
Ошибки при сборе:: undefined reference to `ath_hal_reverseBits'
ar5413.o(.text+0xd41): In function `ar5413SetChannel':
: undefined reference to `ath_hal_reverseBits'
ar5413.o(.text+0xd75): In function `ar5413SetChannel':
: undefined reference to `ath_hal_reverseBits'
ar5413.o(.text+0xd8b): In function `ar5413SetChannel':
: undefined reference to `ath_hal_reverseBits'
ar5413.o(.text+0xe54): In function `ar5413WriteRegs':
: undefined reference to `ath_hal_delay'
ar5413.o(.text+0xebb): In function `ar5413WriteRegs':
: undefined reference to `ath_hal_delay'
ar5413.o(.text+0xf3a): In function `ar5413WriteRegs':
: undefined reference to `ath_hal_delay'
ar2133.o(.text+0xb9): In function `ar2133RfAttach':
: undefined reference to `ath_hal_malloc'
ar2133.o(.text+0x1c2): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_setup'
ar2133.o(.text+0x1e2): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_setup'
ar2133.o(.text+0x202): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_setup'
ar2133.o(.text+0x21e): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_setup'
ar2133.o(.text+0x23a): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_setup'
ar2133.o(.text+0x2e3): more undefined references to `ath_hal_ini_bank_setup' follow
ar2133.o(.text+0x301): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_write'
ar2133.o(.text+0x31b): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_write'
ar2133.o(.text+0x335): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_write'
ar2133.o(.text+0x34f): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_write'
ar2133.o(.text+0x369): In function `ar2133SetRfRegs':
: undefined reference to `ath_hal_ini_bank_write'
ar2133.o(.text+0x380): more undefined references to `ath_hal_ini_bank_write' follow
ar2133.o(.text+0x434): In function `ar2133RfDetach':
: undefined reference to `ath_hal_free'
ar2133.o(.text+0x643): In function `ar2133SetChannel':
: undefined reference to `ath_hal_reverseBits'
ar2133.o(.text+0x791): In function `ar2133SetChannel':
: undefined reference to `ath_hal_reverseBits'
ar2133.o(.text+0x7b7): In function `ar2133SetChannel':
: undefined reference to `ath_hal_reverseBits'
ar2133.o(.text+0x832): In function `ar2133SetChannel':
: undefined reference to `ath_hal_reverseBits'
ar2133.o(.text+0x848): In function `ar2133SetChannel':
: undefined reference to `ath_hal_reverseBits'
ar2133.o(.text+0x885): more undefined references to `ath_hal_reverseBits' follow
ar2133.o(.text+0x411): In function `ar2133WriteRegs':
: undefined reference to `ath_hal_ini_write'
ar5416_ani.o(.text+0x13bf): In function `ar5416AniAttach':
: undefined reference to `ath_hal_memcpy'
ar5416_ani.o(.text+0x13ec): In function `ar5416AniAttach':
: undefined reference to `ath_hal_memcpy'
ar5416_ani.o(.text+0x140b): In function `ar5416AniAttach':
: undefined reference to `ath_hal_memzero'
ar5416_attach.o(.text+0x565): In function `ar5416Attach':
: undefined reference to `ath_hal_malloc'
ar5416_attach.o(.text+0x77b): In function `ar5416Attach':
: undefined reference to `ath_hal_memcpy'
ar5416_attach.o(.text+0x312): In function `ar5416Detach':
: undefined reference to `ath_hal_free'
ar5416_beacon.o(.text+0x265): In function `ar5416BeaconInit':
: undefined reference to `ath_hal_dma_beacon_response_time'
ar5416_beacon.o(.text+0x277): In function `ar5416BeaconInit':
: undefined reference to `ath_hal_sw_beacon_response_time'
ar5416_cal.o(.text+0x1f2): In function `ar5416ResetMeasurement':
: undefined reference to `ath_hal_memzero'
ar5416_cal.o(.text+0x24c): In function `ar5416PerCalibrationN':
: undefined reference to `ath_hal_checkchannel'
ar5416_cal.o(.text+0x56c): In function `ar5416PerCalibrationN':
: undefined reference to `ath_hal_delay'
ar5416_cal.o(.text+0x8fd): In function `ar5416ResetCalValid':
: undefined reference to `ath_hal_checkchannel'
ar5416_cal.o(.text+0x9b7): In function `ar5416InitCal':
: undefined reference to `ath_hal_checkchannel'
ar5416_cal.o(.text+0xa25): In function `ar5416InitCal':
: undefined reference to `ath_hal_wait'
ar5416_cal.o(.text+0xa9f): In function `ar5416InitCal':
: undefined reference to `ath_hal_wait'
ar5416_eeprom.o(.text+0x3d): In function `ar5416EepromRead':
: undefined reference to `ath_hal_wait'
ar5416_misc.o(.text+0x193): In function `ar5416GetDiagState':
: undefined reference to `ath_hal_getdiagstate'
ar5416_misc.o(.text+0x7c9): In function `ar5416ResetTsf':
: undefined reference to `ath_hal_delay'
ar5416_phy.o(.text+0x5d): In function `ar5416GetRateTable':
: undefined reference to `ath_hal_setupratetable'
ar5416_power.o(.text+0xcc): In function `ar5416SetPowerMode':
: undefined reference to `ath_hal_delay'
ar5416_power.o(.text+0xe9): In function `ar5416SetPowerMode':
: undefined reference to `ath_hal_delay'
ar5416_reset.o(.text+0x43b): In function `ar5416InitPLL':
: undefined reference to `ath_hal_delay'
ar5416_reset.o(.text+0x67f): In function `ar5416SetReset':
: undefined reference to `ath_hal_wait'
ar5416_reset.o(.text+0x7b8): In function `ar5416SetResetReg':
: undefined reference to `ath_hal_delay'
ar5416_reset.o(.text+0x7ee): In function `ar5416SetResetReg':
: undefined reference to `ath_hal_wait'
ar5416_reset.o(.text+0x9d8): In function `ar5416GetTargetPowersLeg':
: undefined reference to `ath_hal_memcpy'
ar5416_reset.o(.text+0xbb8): In function `ar5416GetTargetPowers':
: undefined reference to `ath_hal_memcpy'
ar5416_reset.o(.text+0xcb6): In function `ar5416SetTransmitPower':
: undefined reference to `ath_hal_memzero'
ar5416_reset.o(.text+0xcce): In function `ar5416SetTransmitPower':
: undefined reference to `ath_hal_getctl'
ar5416_reset.o(.text+0x1349): In function `ar5416SetTransmitPower':
: undefined reference to `ath_hal_memzero'
ar5416_reset.o(.text+0x2998): In function `ar5416Reset':
: undefined reference to `ath_hal_checkchannel'
ar5416_reset.o(.text+0x2b0f): In function `ar5416Reset':
: undefined reference to `ath_hal_ini_write'
ar5416_reset.o(.text+0x2b4a): In function `ar5416Reset':
: undefined reference to `ath_hal_ini_write'
ar5416_reset.o(.text+0x2b6e): In function `ar5416Reset':
: undefined reference to `ath_hal_ini_write'
ar5416_reset.o(.text+0x2e86): In function `ar5416Reset':
: undefined reference to `ath_hal_memzero'
ar5416_reset.o(.text+0x2ea2): In function `ar5416Reset':
: undefined reference to `ath_hal_memzero'
ar5416_reset.o(.text+0x3e60): In function `ar5416Reset':
: undefined reference to `ath_hal_delay'
ar5416_reset.o(.text+0x43bc): In function `ar5416Reset':
: undefined reference to `ath_hal_delay'
ar5416_reset.o(.text+0x43cd): In function `ar5416Reset':
: undefined reference to `ath_hal_delay'
ar5416_xmit.o(.text+0x485): In function `ar5416FillTxDesc':
: undefined reference to `ath_hal_memzero'
ar5416_xmit.o(.text+0x50b): In function `ar5416StopTxDma':
: undefined reference to `ath_hal_delay'
ar5416_xmit.o(.text+0x5c0): In function `ar5416StopTxDma':
: undefined reference to `ath_hal_delay'
ar5416_xmit.o(.text+0x5ec): In function `ar5416StopTxDma':
: undefined reference to `ath_hal_delay'
ar9160_attach.o(.text+0x58): In function `ar9160Attach':
: undefined reference to `ath_hal_malloc'
sample.o(.text+0x789): In function `calc_usecs_unicast_packet':
: undefined reference to `ath_hal_computetxtime'
sample.o(.text+0x849): In function `calc_usecs_unicast_packet':
: undefined reference to `ath_hal_computetxtime'
ichss.o(.text+0x7fa): In function `ichss_identify':
: undefined reference to `pci_find_bsf'
umass.o(.text+0x19): In function `umass_cam_detach_sim':
: undefined reference to `xpt_bus_deregister'
umass.o(.text+0x35): In function `umass_cam_detach_sim':
: undefined reference to `cam_sim_free'
umass.o(.text+0x489): In function `umass_cam_sense_cb':
: undefined reference to `xpt_done'
umass.o(.text+0x62b): In function `umass_cam_cb':
: undefined reference to `xpt_done'
umass.o(.text+0x64b): In function `umass_cam_cb':
: undefined reference to `xpt_done'
umass.o(.text+0x8e9): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x91b): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x99b): more undefined references to `xpt_done' follow
umass.o(.text+0xae7): In function `umass_cam_action':
: undefined reference to `cam_calc_geometry'
umass.o(.text+0xaef): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0xb26): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0xbb9): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0xcc8): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0xd0a): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0xd25): more undefined references to `xpt_done' follow
umass.o(.text+0x1005): In function `umass_attach':
: undefined reference to `cam_simq_alloc'
umass.o(.text+0x1059): In function `umass_attach':
: undefined reference to `cam_sim_alloc'
umass.o(.text+0x1085): In function `umass_attach':
: undefined reference to `xpt_bus_register'
umass.o(.text+0x1165): In function `umass_attach':
: undefined reference to `cam_simq_free'
umass.o(.text+0x12a1): In function `umass_cam_rescan_callback':
: undefined reference to `xpt_free_path'
umass.o(.text+0x22ee): In function `umass_cam_rescan':
: undefined reference to `xpt_periph'
umass.o(.text+0x22fd): In function `umass_cam_rescan':
: undefined reference to `xpt_create_path'
umass.o(.text+0x2333): In function `umass_cam_rescan':
: undefined reference to `xpt_setup_ccb'
umass.o(.text+0x2350): In function `umass_cam_rescan':
: undefined reference to `xpt_action'
umass.o(.text+0x43b): In function `umass_cam_quirk_cb':
: undefined reference to `xpt_done'
umass.o(.text+0x453): In function `umass_cam_quirk_cb':
: undefined reference to `xpt_done'
smist.o(.text+0x8d9): In function `smist_identify':
: undefined reference to `pci_find_device'
local_apic.o(.text+0x103c): In function `apic_setup_io':
: undefined reference to `msi_init'
local_apic.o(.text+0x106e): In function `apic_setup_io':
: undefined reference to `msi_init'
nexus.o(.text+0x27): In function `nexus_map_msi':
: undefined reference to `msi_map'
nexus.o(.text+0x3b): In function `nexus_release_msix':
: undefined reference to `msix_release'
nexus.o(.text+0x51): In function `nexus_alloc_msix':
: undefined reference to `msix_alloc'
nexus.o(.text+0x71): In function `nexus_release_msi':
: undefined reference to `msi_release'
nexus.o(.text+0x9f): In function `nexus_alloc_msi':
: undefined reference to `msi_alloc'
*** Error code 1Stop in /usr/obj/usr/src/sys/kernel.25-06-10.
*** Error code 1Stop in /usr/src.
*** Error code 1Stop in /usr/src.
[4:52] /usr/src >
dmesg(вдруг понадобится)
[DING!] /home/whiteo >dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Atom(TM) CPU N450 @ 1.66GHz (1662.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Stepping = 10
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Logical CPUs per core: 2
real memory = 2136801280 (2037 MB)
avail memory = 2081300480 (1984 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD XSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x18e8-0x18ef mem 0xf0300000-0xf037ffff,0xd0000000-0xdfffffff,0xf0000000-0xf00fffff irq 16 at device 2.0 on pci0
vgapci1: <VGA-compatible display> mem 0xf0380000-0xf03fffff at device 2.1 on pci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib1
pci5: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci9: <ACPI PCI bus> on pcib3
pci9: <base peripheral> at device 0.0 (no driver attached)
pci9: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pci9: <base peripheral> at device 0.3 (no driver attached)
jme0: <JMicron Inc, JMC260 Fast Ethernet> port 0x3400-0x347f,0x3000-0x30ff mem 0xf0200000-0xf0203fff irq 18 at device 0.5 on pci9
jme0: Using 8 MSIX messages.
miibus0: <MII bus> on jme0
jmphy0: <JMP202 10/100 media interface> PHY 1 on miibus0
jmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
jme0: Ethernet address: 00:90:f5:a0:22:77
jme0: [FILTER]
jme0: [FILTER]
jme0: [FILTER]
jme0: [FILTER]
jme0: [FILTER]
jme0: [FILTER]
jme0: [FILTER]
jme0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0604000-0xf06043ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci17: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xdc000-0xdffff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 238475MB <TOSHIBA MK2565GSX GJ003A> at ata0-master SATA150
cpu0: Cx states changed
cpu1: Cx states changed
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
cpu0: Cx states changed
cpu1: Cx states changed
cpu0: Cx states changed
cpu1: Cx states changed
jme0: link state changed to UP
> # Bus support.
> #device eisa
> #device pciВерните шины !!! И наверное ath тоже нужен, раз есть ath_hal и ath_rate_sample.
># Bus support.
>#device eisa
>#device pciваще красавчик )))
в мануале правильно сказано - трогать ядро можно только тем, кто понимает что делает )
на pci висит вся низкоскоростная переферия ... нужно хотяб примерно знать что такое PC ))
я еще несколько ошибок с худу беглым взглядом нашел ))
думаю тема затянется ))
Бегом бегом делал, ошибок много не только в конфиге ядра как оказалось, сказалась тут поговорка "Поспешишь людей насмешишь" вот моя беглость и привела к фейлу
Внимательно прошелся по конфигу исправил всю ерунду, ядро нормально собралось. Спасибо за советы
upd:Какие пункты в scsi нужно раскомментировать чтобы юсб активировать, в частности флеш драйвы
>Внимательно прошелся по конфигу исправил всю ерунду, ядро нормально собралось. Спасибо за
>советы
>
>
>upd:
>
>Какие пункты в scsi нужно раскомментировать чтобы юсб активировать, в частности флеш
>драйвыdevice umass # Disks/Mass storage - Requires scbus and da
>Внимательно прошелся по конфигу исправил всю ерунду, ядро нормально собралось. Спасибо за
>советы
>
>
>upd:
>
>Какие пункты в scsi нужно раскомментировать чтобы юсб активировать, в частности флеш
>драйвыdevice scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device umass # Disks/Mass storage - Requires scbus and da
>[оверквотинг удален]
>
>device scbus
> # SCSI
>bus (required for SCSI)
>device da
>
> # Direct Access (disks)
>device umass
> # Disks/Mass
>storage - Requires scbus and daчитай коменты - там либо в начале блока устройств, либо в самом устройстве описаны требуемые девайсы
>[оверквотинг удален]
>>bus (required for SCSI)
>>device da
>>
>> # Direct Access (disks)
>>device umass
>> # Disks/Mass
>>storage - Requires scbus and da
>
>читай коменты - там либо в начале блока устройств, либо в самом
>устройстве описаны требуемые девайсыспасибо но чет не хочет, компильнул ребутнулся а флешки как не видет(
разобрался, все пашет на ура