Поставил Nagiosgraph.
Графики рисует, ррд файлы создает, но скрипты не выполняет. Например на страничке с графиком статистики сообщения:
JavaScript is disabled. и ниже nagiosgraph.js is not installed or wrong version.
Залез в логи нагиографа - с включеном дебагом никаких конфликтов не вижу.
Но с httpd-error.log ситуация иная:
[Wed Jun 13 13:01:04 2012] [notice] Apache/2.2.22 (FreeBSD) PHP/5.3.13 with Suhosin-Patch mod_ssl/2.2.22 OpenSSL/0.9.8q DAV/2 configured -- resuming normal operations
[Wed Jun 13 13:06:12 2012] [error] [client 10.0.0.4] File does not exist: /usr/local/www/apache22/data/usr, referer: http://10.0.0.3/nagios/cgi-bin/nagiosgraph/show.cgi?host=loc... Load&geom=450x150
[Wed Jun 13 13:06:12 2012] [error] [client 10.0.0.4] File does not exist: /usr/local/www/apache22/data/usr, referer: http://10.0.0.3/nagios/cgi-bin/nagiosgraph/show.cgi?host=loc... Load&geom=450x150
[Wed Jun 13 13:06:12 2012] [error] [client 10.0.0.4] File does not exist: /usr/local/www/apache22/data/usr, referer: http://10.0.0.3/nagios/cgi-bin/nagiosgraph/show.cgi?host=loc... Load&geom=450x150
Почему так, подскажите пожалуйста, как исправить?
P.S. В следующих сообщениях напишу содержимое конф файлов.
Nagiosgraph.conf:
# nagiosgraph configuration file
#
# $Id: nagiosgraph.conf 492 2011-01-15 06:26:55Z mwall $
# License: OSI Artistic License
# http://www.opensource.org/licenses/artistic-license.php
# Author: (c) 2005 Soren Dossing
# Author: (c) 2008 Alan Brenner, Ithaka Harbors
# Author: (c) 2010 Matthew Wall# Location of output from nagiosgraph data processing
logfile = /var/spool/nagios/nagiosgraph.log# Location of output from nagiosgraph CGI scripts
cgilogfile = /var/log/nagiosgraph-cgi.log# Location of nagios performance data log file.
perflog = /var/spool/nagios/perfdata.log# Directory in which to store RRD files
rrddir = /var/spool/nagios/rrd# File containing regular expressions to identify service and perf data
mapfile = /usr/local/etc/nagios/nagiosgraph/map# Nagiosgraph CGI URL.
nagiosgraphcgiurl = /nagiosgraph/cgi-bin# Nagios CGI URL. If the Nagiosgraph CGI scripts are in a directory other
# than the Nagios CGI directory, then specify the Nagios CGI URL here.
#nagioscgiurl = /nagios/cgi-bin# JavaScript: URL to the nagiosgraph javascript file.
javascript = /usr/local/www/nagios/stylesheets/nagiosgraph.js# Stylesheet: URL to the nagiosgraph stylesheet.
stylesheet =/usr/local/www/nagios/stylesheets/nagiosgraph.css# File containing labels for services and data (optional)
#labelfile = /usr/local/etc/nagios/nagiosgraph/labels.conf# Location of showhost control file (optional)
#hostdb = /usr/local/etc/nagios/nagiosgraph/hostdb.conf# Location of showservice control file (optional)
#servdb = /usr/local/etc/nagios/nagiosgraph/servdb.conf# Location of showgroup control file (required for showgroup.cgi)
groupdb = /usr/local/etc/nagios/nagiosgraph/groupdb.conf# File containing data sets that should be selected in queries (optional)
#datasetdb = /usr/local/etc/nagios/nagiosgraph/datasetdb.conf# Access control configuration (optional)
# The authorization method can be one of nagios3 or nagiosgraph. If no
# method is defined, access will be granted to all hosts and services.# For access control via nagios, specify the nagios configuration files.
# Nagios3 defaults to use authentication. nagiosgraph looks for the
# use_authentication variable to determine whether authentication is enabled.
# If authentication is enabled, nagiosgraph looks for the
# authorized_for_all_hosts, authorized_for_all_services, and default_user_name
# variables to determine permissions.
#authzmethod = nagios3
#authzfile = /usr/local/etc/nagios/cgi.cfg# For access control via nagiosgraph, specify a single access control file.
# See the sample access control file for syntax and examples.
#authzmethod = nagiosgraph
#authzfile = /usr/local/etc/nagios/nagiosgraph/access.conf
# Logging can be enabled for a specific CGI script and/or specific hosts or
# services. When level is set to 5, the logs will see a lot of extra output,
# so be sure to reset the level when you have finished debugging.# Log Levels
# 0 = None
# 1 = Critical
# 2 = Error
# 3 = Warn
# 4 = Info
# 5 = Debug
debug = 5### log level for specific scripts
# log level for insert.pl
#debug_insert = 5
# if this is set to a hostname, then only log for this host
#debug_insert_host = host1
# if this is set to a service, then only log for this service
#debug_insert_service = PLW
# *_host and *_service together for a specific service on a specific host.
# log level for show.cgi
#debug_show = 5
#debug_show_host = host1
#debug_show_service = ping
# log level for showhost.cgi
#debug_showhost = 5
#debug_showhost_host = host1
#debug_showhost_service = ping
# log level for showservice.cgi
#debug_showservice = 5
#debug_showservice_host = host1
#debug_showservice_service = ping
# log level for showgroup.cgi
#debug_showgroup = 5
#debug_showgroup_host = host1
#debug_showgroup_service = ping
# log level for showgraph.cgi
#debug_showgraph = 5
#debug_showgraph_host = host1
#debug_showgraph_service = ping
# log level for testcolor.cgi
#debug_testcolor = 5# graph sizes
geometries = 650x50,800x100,1000x200,2000x100# default graph size (optional)
#default_geometry = 600x100# Color scheme for graphs. There are 8 pre-defined schemes (1-8) and one
# custom scheme (9). The pre-defined schemes use a color based on the
# characters in the name of each data source. The custom scheme uses each
# color, in order. Use testcolor.cgi to see what the color schemes
# look like and how they apply to specific service and data set names.
colorscheme = 3# Custom color scheme is defined by a comma-separated list of RGB hex colors.
# rainbow: reddish, orange, yellow, green, light blue, dark blue, purple, grey
#colors = D05050,D08050,D0D050,50D050,50D0D0,5050D0,D050D0,505050
# light/dark pairs: blue, green, purple, orange
colors = 90d080,30a030,90c0e0,304090,ffc0ff,a050a0,ffc060,c07020
# green from light to dark
#colors = 80d080,50a050,308030# Colors for the maximum and minimum values, applied to the data for services
# in withmaximums and withminimums
#colormax = 888888
#colormin = BBBBBB# Default line style (LINE1, LINE2, LINE3, AREA, TICK); see rrdgraph_graph
plotas = LINE2# Line styles for specific data sources.
#
# Each style is a list of qualified data source names separated by semicolons.
# A single qualified data source must end with a semicolon.
# [[[host,]service,]database,]datasource;[[[h2,]s2,]db2,]ds2
# The old-style specification is deprecated:
# datasource1[,datasource2[,datasource3[,...]]]
#
# For example, this uses LINE3 for all PING sources called 'data' from acme.com
# plotasLINE3 = .*.acme.com,PING,.*,data;
plotasLINE1 = load5,data;load15,data
plotasLINE2 =
plotasLINE3 =
plotasAREA = idle,data;system,data;user,data;nice,data
plotasTICK =# Data sources that should be stacked.
#
# This is a list of qualified data source names separated by semicolons.
# A single qualified data source must end with a semicolon.
stack = system,data;user,data;nice,data# Data sources whose value should be negated.
#
# This is a list of qualified data source names separated by semicolons.
# A single qualified data source must end with a semicolon.
#negate = byte-received;drop-received;error-received;multi-received;packet-received# Specify line formats per data source. This is a semicolon-separated list of
# line format specifications. Each format specification contains:
# [[[host,]service,]database,]ds-name=linestyle[,color][,STACK]
# The old-style specification is deprecated:
# ds-name,linestyle[,color][,STACK]
#
# For example, this plots every data source called 'crit' as a thin red line:
#lineformat = crit=LINE1,D05050
# This stacks system, nice, and idle onto whatever sources come before them:
#lineformat = system=AREA,FFAAAA;nice=AREA,AAAAFF,STACK;idle,AREA,AAFFAA,STACK
# If the data sources have the same name but different database files, qualify
# them by leading with the database (and service and host, if necessary).
#lineformat = nice,data=AREA,AAAAFF,STACK;idle,data=AREA,AAFFAA,STACK
lineformat = warn=LINE1,D0D050;crit=LINE1,D05050# Graphs to show in host-service page (day, week, month, quarter, year)
timeall = day,week,month,year
# Graphs to show in host page
timehost = day,week,month
# Graphs to show in service page
timeservice = day,week,month
# Graphs to show in group page
timegroup = day,week,month# Time periods that should default to expanded state. If not specified here,
# the period will default to a collapsed state.
expand_timeall = day,week,month,year
expand_timehost = week
expand_timeservice = week
expand_timegroup = day# Formats for time and date.
timeformat_now = %H:%M:%S %d %b %Y %Z
timeformat_day = %H:%M %e %b
timeformat_week = %e %b
timeformat_month = Week %U
timeformat_quarter = Week %U
timeformat_year = %b %Y# Set this to automatically refresh the web page. Value is number of seconds.
#refresh = 300# Set this to hide the nagiosgraph title (useful when nagiosgraph is
# embedded in the nagios frame).
#hidengtitle = true# Optional - define rrdopts override file, this enables you to specify
# particular rrdgraph options against each service.
#rrdoptsfile=/etc/nagiosgraph/rrdopts.conf# If perfloop is set, insert.pl will loop waiting for input data. The value
# is the polling interval, in seconds. Set this only if you intend to run
# insert.pl independently of Nagios.
#perfloop = 30# The heartbeat, stepsize, and resolution are rrdtool parameters. They are
# used when RRD files are created. Changes to these values have no effect
# on existing RRD files. See the rrdtool documentation for details.
# These values must be coordinated with nagios service check settings and
# the nagiosgraph data processing interval.# RRD heartbeat, in seconds. This defines the maximum length of an interval
# with no data update before rrd considers the data unknown. Typically twice
# the size of servicecheck interval. 600 is the rrdtool default.
heartbeat = 600
# Specify a heartbeat for specific hosts and services.
#heartbeats = HOST,SERVICE,DATABASE=1200;HOST,SERVICE,.*=1800;.*,.*,.*=600# RRD step size, in seconds. This defines how often the data will be updated.
# Typically the size of the servicecheck interval. 300 is the rrdtool default.
#stepsize = 300
# Specify a step size for specific hosts and services.
#stepsizes = HOST,SERVICE,DATABASE=600;HOST,SERVICE,.*=1200;.*,.*,.*=300# RRD parameters. These numbers control the number of stored data values
# and thus RRD file size. They are used when creating RRD files.
# Each RRD file is created with 4 lines of RRA arguments:
# RRA:(AVERAGE|MIN|MAX|LAST):xff:step1:row1
# RRA:(AVERAGE|MIN|MAX|LAST):xff:step2:row2
# RRA:(AVERAGE|MIN|MAX|LAST):xff:step3:row3
# RRA:(AVERAGE|MIN|MAX|LAST):xff:step4:row4
#
# Using default values, the RRAs are as follows:
# RRA:AVERAGE:0.5:1:600
# RRA:AVERAGE:0.5:6:700
# RRA:AVERAGE:0.5:24:775
# RRA:AVERAGE:0.5:288:797
#
# The rows are defined by the four resolution values.
# The default results in RRD files that are 20K to 75K in size:
#resolution = 600 700 775 797
# These values keep many more data points, but result in much larger files:
#resolution = 17280 17520 32850 1095
# Specify resolution for specific hosts and services.
#resolutions = HOST,SERVICE,.*=17280 17520 32850 1095;.*,.*,.*=600 700 775 797
#
# The steps are defined by the four step values.
# The default results in consolidated data points for day, week, month, year
#step = 1 6 24 288
# Specify step for specific hosts and services.
#steps = HOST,SERVICE,.*=1 12 48 596;.*,.*,.*=1 6 24 288
#
# The xff (xfiles factor) defines what part of a consolidation interval may be
# made up from UNKNOWN data while the consolidated value is still regarded as
# known. It is given as the ratio of allowed UNKNOWN PDPs to the number of
# PDPs in the interval. It ranges from 0 to 1, exclusive.
#xff = 0.5
# Specify xff for specific hosts and services.
#xffs = HOST,SERVICE,.*=0.9;.*,.*,.*=0.5# By default, each RRD records average values. To record maximum, minimum, or
# last value instead of the average value, specify the service and database
# names here, optionally qualified by hostname.
# [host,]service,database;[[host,]service2,database][;...]
# The old-style specification is deprecated:
# service1[,service2[,service3[,...]]]
#maximums = .*.acme.com,service1,.*;
#maximums = host1,service1,database;service2,database2;.*.acme.com,service3,.*
maximums = Current Load,.*;Current Users,.*;Total Processes,.*;PLW,.*
minimums =
lasts =# This lists data that need to go into separate rrd files. This is used
# when creating new rrd files when a change to the map is not possible. Use
# this to segregate a value from other returned values for a specific host.
# Each entry consists of a comma separated set of host,service,value. Separate
# each set with a semicolon.
#hostservvar = server1,service1,val1;server2,service2,val2
#hostservvar = host2,PLW,smtp_error# Organization of RRD files. There are two ways to organize the RRD files:
# flat : all in a single directory (the old way):
# rrddir/HOST_SERVICE_DATABASE.rrd
# subdir : organized by host (the new way):
# rrddir/HOST/SERVICE___DATABASE.rrd
dbseparator = subdir# Optionally force the language. If no language is specified, the language
# is determined from the browser environment or explicit cgi argument. The
# possible values are standard language/country codes such as es, fr, de,
# en_US, en_UK, ... If there is no corresponding language file, the language
# reverts to english.
#language = es# JavaScript must be enabled for full functionality. But if you need to
# disable it and you do not want the warnings, this lets you hide them.
#hidejswarnings = 1
httpd.conf:
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/foo_log"
# with ServerRoot set to "/usr/local" will be interpreted by the
# server as "/usr/local//var/log/foo_log".
LogLevel debug
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr/local"#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module libexec/apache22/mod_authn_file.so
LoadModule authn_dbm_module libexec/apache22/mod_authn_dbm.so
LoadModule authn_anon_module libexec/apache22/mod_authn_anon.so
LoadModule authn_default_module libexec/apache22/mod_authn_default.so
LoadModule authn_alias_module libexec/apache22/mod_authn_alias.so
LoadModule authz_host_module libexec/apache22/mod_authz_host.so
LoadModule authz_groupfile_module libexec/apache22/mod_authz_groupfile.so
LoadModule authz_user_module libexec/apache22/mod_authz_user.so
LoadModule authz_dbm_module libexec/apache22/mod_authz_dbm.so
LoadModule authz_owner_module libexec/apache22/mod_authz_owner.so
LoadModule authz_default_module libexec/apache22/mod_authz_default.so
LoadModule auth_basic_module libexec/apache22/mod_auth_basic.so
LoadModule auth_digest_module libexec/apache22/mod_auth_digest.so
LoadModule file_cache_module libexec/apache22/mod_file_cache.so
LoadModule cache_module libexec/apache22/mod_cache.so
LoadModule disk_cache_module libexec/apache22/mod_disk_cache.so
LoadModule dumpio_module libexec/apache22/mod_dumpio.so
LoadModule reqtimeout_module libexec/apache22/mod_reqtimeout.so
LoadModule include_module libexec/apache22/mod_include.so
LoadModule filter_module libexec/apache22/mod_filter.so
LoadModule charset_lite_module libexec/apache22/mod_charset_lite.so
LoadModule deflate_module libexec/apache22/mod_deflate.so
LoadModule log_config_module libexec/apache22/mod_log_config.so
LoadModule logio_module libexec/apache22/mod_logio.so
LoadModule env_module libexec/apache22/mod_env.so
LoadModule mime_magic_module libexec/apache22/mod_mime_magic.so
LoadModule cern_meta_module libexec/apache22/mod_cern_meta.so
LoadModule expires_module libexec/apache22/mod_expires.so
LoadModule headers_module libexec/apache22/mod_headers.so
LoadModule usertrack_module libexec/apache22/mod_usertrack.so
#LoadModule unique_id_module libexec/apache22/mod_unique_id.so
LoadModule setenvif_module libexec/apache22/mod_setenvif.so
LoadModule version_module libexec/apache22/mod_version.so
LoadModule ssl_module libexec/apache22/mod_ssl.so
LoadModule mime_module libexec/apache22/mod_mime.so
LoadModule dav_module libexec/apache22/mod_dav.so
LoadModule status_module libexec/apache22/mod_status.so
LoadModule autoindex_module libexec/apache22/mod_autoindex.so
LoadModule asis_module libexec/apache22/mod_asis.so
LoadModule info_module libexec/apache22/mod_info.so
LoadModule cgi_module libexec/apache22/mod_cgi.so
LoadModule dav_fs_module libexec/apache22/mod_dav_fs.so
LoadModule vhost_alias_module libexec/apache22/mod_vhost_alias.so
LoadModule negotiation_module libexec/apache22/mod_negotiation.so
LoadModule dir_module libexec/apache22/mod_dir.so
LoadModule imagemap_module libexec/apache22/mod_imagemap.so
LoadModule actions_module libexec/apache22/mod_actions.so
LoadModule speling_module libexec/apache22/mod_speling.so
LoadModule userdir_module libexec/apache22/mod_userdir.so
LoadModule alias_module libexec/apache22/mod_alias.so
LoadModule rewrite_module libexec/apache22/mod_rewrite.so
LoadModule php5_module libexec/apache22/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User www
Group www</IfModule>
</IfModule># 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
##
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin you@example.com#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName 127.0.0.1:80#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/usr/local/www/apache22/data"
#DocumentRoot "/usr/local/www/apache22/
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
AllowOverride None
Order deny,allow
Deny from all
</Directory>#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
##
# This should be changed to whatever you set DocumentRoot to.
#
#<Directory "/usr/local/www/apache22">
<Directory "/usr/local/www/apache22/data">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/var/log/httpd-error.log"#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog "/var/log/httpd-access.log" common#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog "/var/log/httpd-access.log" combined
</IfModule><IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/usr/local/www/apache22/cgi-bin/"</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
##
#Scriptsock /var/run/cgisock
</IfModule>#
# "/usr/local/www/apache22/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/www/apache22/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig etc/apache22/mime.types#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
##
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi# For type maps (negotiated resources):
#AddHandler type-map var#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile etc/apache22/magic#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
##
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off# Supplemental configuration
#
# The configuration files in the etc/apache22/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.# Server-pool management (MPM specific)
#Include etc/apache22/extra/httpd-mpm.conf# Multi-language error messages
#Include etc/apache22/extra/httpd-multilang-errordoc.conf# Fancy directory listings
#Include etc/apache22/extra/httpd-autoindex.conf# Language settings
#Include etc/apache22/extra/httpd-languages.conf# User home directories
#Include etc/apache22/extra/httpd-userdir.conf# Real-time info on requests and configuration
#Include etc/apache22/extra/httpd-info.conf# Virtual hosts
Include /usr/local/etc/apache22/Includes/virtual.conf
#Include etc/apache22/extra/httpd-vhosts.conf# Local access to the Apache HTTP Server Manual
#Include etc/apache22/extra/httpd-manual.conf# Distributed authoring and versioning (WebDAV)
#Include etc/apache22/extra/httpd-dav.conf# Various default settings
#Include etc/apache22/extra/httpd-default.conf# Secure (SSL/TLS) connections
#Include etc/apache22/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>#Include etc/apache22/Includes/*.conf
Include /usr/local/etc/apache22/Includes/nagios.conf
#Include /usr/local/etc/apache22/Includes/virtual.conf
virtual.conf:
Alias /nagiosgraph/nagiosgraph.css "/usr/local/www/nagios/stylesheets/nagiosgraph.css"
Alias /nagiosgraph/nagiosgraph.js "/usr/local/www/nagios/stylesheets/nagiosgraph.js "
ScriptAlias /nagiosgraph/cgi-bin/ "/usr/local/www/nagios/cgi-bin/nagiosgraph/"nagios.conf
ScriptAlias /nagios/cgi-bin /usr/local/www/nagios/cgi-bin
<Directory "/usr/local/www/nagios/cgi-bin">
Options ExecCGI
AllowOverride None
Order allow,deny
Allow from all
AuthName "Nagios Access"
AuthType Basic
AuthUserFile /usr/local/etc/nagios/htpasswd.users
Require valid-user
</Directory>
Alias /nagios /usr/local/www/nagios
<Directory "/usr/local/www/nagios">
Options None
AllowOverride None
Order allow,deny
Allow from all
AuthName "Nagios Access"
AuthType Basic
AuthUserFile /usr/local/etc/nagios/htpasswd.users
Require valid-user
</Directory>