Коллеги,подскажите пожалуйста в чем может быть дело:
1. был сервер с sshv1, по некоторым понятным причинам необходимо установить sshv2
2. установил OpenSSH_3.5p1(OpenSSL 0.9.6 24 Sep 2000)
3. сгененрил ключи как в мануале, положил куда надо, запустил серверВ итоге не пускает по ssh - говорит не верный пароль и доступ запрещен, а по telnet(включил на время миграции v1=>v2) все нормально пускает.
Вот логи, которые я предполагаю могут помочь:
ssh -v -v -v test@127.0.0.1
OpenSSH_3.5p1, SSH protocols 1.5/2.0, OpenSSL 0x0090600f
debug1: Reading configuration data /usr/local/etc/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to 127.0.0.1 [127.0.0.1] port 22.
debug1: Connection established.
debug1: identity file /home/test/.ssh/identity type -1
debug1: identity file /home/test/.ssh/id_rsa type -1
debug1: identity file /home/test/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.5p1
debug1: match: OpenSSH_3.5p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.5p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 123/256
debug1: bits set: 986/2049
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/test/.ssh/known_hosts
debug3: check_host_in_hostfile: filename /usr/local/etc/ssh_known_hosts
debug3: check_host_in_hostfile: filename /home/test/.ssh/known_hosts
debug3: check_host_in_hostfile: filename /usr/local/etc/ssh_known_hosts
debug2: no key of type 0 for host 127.0.0.1
debug3: check_host_in_hostfile: filename /home/test/.ssh/known_hosts2
debug3: check_host_in_hostfile: filename /usr/local/etc/ssh_known_hosts2
debug3: check_host_in_hostfile: filename /home/test/.ssh/known_hosts
debug3: check_host_in_hostfile: filename /usr/local/etc/ssh_known_hosts
debug2: no key of type 2 for host 127.0.0.1
The authenticity of host '127.0.0.1 (127.0.0.1)' can't be established.
RSA key fingerprint is b5:b2:54:83:e7:75:9e:64:5c:bb:da:5b:3c:72:93:09.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '127.0.0.1' (RSA) to the list of known hosts.
debug1: bits set: 1058/2049
debug1: ssh_rsa_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: next auth method to try is publickey
debug1: try privkey: /home/test/.ssh/identity
debug3: no such identity: /home/test/.ssh/identity
debug1: try privkey: /home/test/.ssh/id_rsa
debug3: no such identity: /home/test/.ssh/id_rsa
debug1: try privkey: /home/test/.ssh/id_dsa
debug3: no such identity: /home/test/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: next auth method to try is keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: authentications that can continue: publickey,password,keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred:
debug3: authmethod_is_enabled password
debug1: next auth method to try is password
test@127.0.0.1's password:
debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: authentications that can continue: publickey,password,keyboard-interactive
Permission denied, please try again.
test@127.0.0.1's password:
debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: authentications that can continue: publickey,password,keyboard-interactive
Permission denied, please try again.
test@127.0.0.1's password:
debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: authentications that can continue: publickey,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug1: no more auth methods to try
Permission denied (publickey,password,keyboard-interactive).
debug1: Calling cleanup 0x2caf0(0x0)
------------------------------------------------------------------------------------------
sshd -d -d -ddebug1: sshd version OpenSSH_3.5p1
debug1: private host key: #0 type 0 RSA1
debug3: Not a RSA1 key file /usr/local/etc/ssh_host_rsa_key.
debug1: read PEM private key done: type RSA
debug1: private host key: #1 type 1 RSA
debug3: Not a RSA1 key file /usr/local/etc/ssh_host_dsa_key.
debug1: read PEM private key done: type DSA
debug1: private host key: #2 type 2 DSA
socket: Invalid argument
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
Generating 768 bit RSA key.
RSA key generation complete.
debug1: Server will not fork when running in debugging mode.
Connection from 127.0.0.1 port 1035
debug1: Client protocol version 2.0; client software version OpenSSH_3.5p1
debug1: match: OpenSSH_3.5p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-1.99-OpenSSH_3.5p1
debug2: Network child is on pid 1571
debug3: privsep user:group 520:523
debug3: preauth child monitor started
debug3: mm_request_receive entering
debug1: permanently_set_uid: 520/523
debug1: list_hostkey_types: ssh-rsa,ssh-dss
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received
debug3: mm_request_send entering: type 0
debug3: monitor_read: checking request 0
debug3: mm_answer_moduli: got parameters: 1024 2048 8192
debug3: mm_request_send entering: type 1
debug3: mm_choose_dh: waiting for MONITOR_ANS_MODULI
debug3: mm_request_receive_expect entering: type 1
debug3: mm_request_receive entering
debug2: monitor_read: 0 used once, disabling now
debug3: mm_choose_dh: remaining 0
debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent
debug3: mm_request_receive entering
debug1: dh_gen_key: priv key bits set: 130/256
debug1: bits set: 1058/2049
debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT
debug1: bits set: 986/2049
debug3: mm_key_sign entering
debug3: mm_request_send entering: type 4
debug3: monitor_read: checking request 4
debug3: mm_answer_sign
debug3: mm_key_sign: waiting for MONITOR_ANS_SIGN
debug3: mm_request_receive_expect entering: type 5
debug3: mm_request_receive entering
debug3: mm_answer_sign: signature 0x71a20(143)
debug3: mm_request_send entering: type 5
debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug2: monitor_read: 4 used once, disabling now
debug3: mm_request_receive entering
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: KEX done
debug1: userauth-request for user test service ssh-connection method none
debug1: attempt 0 failures 0
debug3: mm_getpwnamallow entering
debug3: mm_request_send entering: type 6
debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM
debug3: mm_request_receive_expect entering: type 7
debug3: mm_request_receive entering
debug3: monitor_read: checking request 6
debug3: mm_answer_pwnamallow
debug3: allowed_user: today 13660 sp_expire -1 sp_lstchg 13659 sp_max 99999
debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
debug3: mm_request_send entering: type 7
debug2: monitor_read: 6 used once, disabling now
debug3: mm_request_receive entering
debug2: input_userauth_request: setting up authctxt for test
debug3: mm_inform_authserv entering
debug3: mm_request_send entering: type 3
debug2: input_userauth_request: try method none
debug3: mm_auth_password entering
debug3: mm_request_send entering: type 10
debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD
debug3: mm_request_receive_expect entering: type 11
debug3: mm_request_receive entering
debug3: monitor_read: checking request 3
debug3: mm_answer_authserv: service=ssh-connection, style=
debug2: monitor_read: 3 used once, disabling now
debug3: mm_request_receive entering
debug3: monitor_read: checking request 10
debug3: mm_answer_authpassword: sending result 0
debug3: mm_request_send entering: type 11
Failed none for test from 127.0.0.1 port 1035 ssh2
debug3: mm_request_receive entering
debug3: mm_auth_password: user not authenticated
Failed none for test from 127.0.0.1 port 1035 ssh2
debug1: userauth-request for user test service ssh-connection method keyboard-interactive
debug1: attempt 1 failures 1
debug2: input_userauth_request: try method keyboard-interactive
debug1: keyboard-interactive devs
debug1: auth2_challenge: user=test devs=
debug1: kbdint_alloc: devices ''
debug2: auth2_challenge_start: devices
Failed keyboard-interactive for test from 127.0.0.1 port 1035 ssh2
debug1: userauth-request for user test service ssh-connection method password
debug1: attempt 2 failures 2
debug2: input_userauth_request: try method password
debug3: mm_auth_password entering
debug3: mm_request_send entering: type 10
debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD
debug3: mm_request_receive_expect entering: type 11
debug3: mm_request_receive entering
debug3: monitor_read: checking request 10
debug3: mm_answer_authpassword: sending result 0
debug3: mm_request_send entering: type 11
Failed password for test from 127.0.0.1 port 1035 ssh2
debug3: mm_request_receive entering
debug3: mm_auth_password: user not authenticated
Failed password for test from 127.0.0.1 port 1035 ssh2
debug1: userauth-request for user test service ssh-connection method password
debug1: attempt 3 failures 3
debug2: input_userauth_request: try method password
debug3: mm_auth_password entering
debug3: mm_request_send entering: type 10
debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD
debug3: mm_request_receive_expect entering: type 11
debug3: mm_request_receive entering
debug3: monitor_read: checking request 10
debug3: mm_answer_authpassword: sending result 0
debug3: mm_request_send entering: type 11
Failed password for test from 127.0.0.1 port 1035 ssh2
debug3: mm_request_receive entering
debug3: mm_auth_password: user not authenticated
Failed password for test from 127.0.0.1 port 1035 ssh2
debug1: userauth-request for user test service ssh-connection method password
debug1: attempt 4 failures 4
debug2: input_userauth_request: try method password
debug3: mm_auth_password entering
debug3: mm_request_send entering: type 10
debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD
debug3: mm_request_receive_expect entering: type 11
debug3: mm_request_receive entering
debug3: monitor_read: checking request 10
debug3: mm_answer_authpassword: sending result 0
debug3: mm_request_send entering: type 11
Failed password for test from 127.0.0.1 port 1035 ssh2
debug3: mm_request_receive entering
debug3: mm_auth_password: user not authenticated
Failed password for test from 127.0.0.1 port 1035 ssh2
Connection closed by 127.0.0.1
debug1: Calling cleanup 0x34c90(0x0)Причем запись в логе сервера
Failed keyboard-interactive for test from 127.0.0.1 port 1035 ssh2
появляется до того, как я ввожу пароль в клиентской сессии.Мне кажется, что я просто не учел что-то простое, но я уже пару дней все крутил - ничего не помогает...
Заранее благодарен!
P.S.
Решилось вот так
http://www.openssh.org/faq.html#3.5