Доброго времени суток всем
проблема - при запуске Xorg просто черный экран , на cntr+alt+backspace не реагирует

#xorg -retro

запускаются иксы со стандартным xterm все видно , но толи он виснет  , либо что то с дровами т.к. ни мышь ни клава не работают

/etc/X11/xorg.conf_______________________________________________
Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/local/lib/xorg/modules"
    FontPath     "/usr/local/lib/X11/fonts/misc/"
    FontPath     "/usr/local/lib/X11/fonts/TTF/"
    FontPath     "/usr/local/lib/X11/fonts/OTF"
    FontPath     "/usr/local/lib/X11/fonts/Type1/"
    FontPath     "/usr/local/lib/X11/fonts/100dpi/"
    FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
    Load  "extmod"
    Load  "record"
    Load  "dbe"
    Load  "glx"
    
    Load  "dri2"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/sysmouse"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "HWcursor"               # [<bool>]
        #Option     "NoAccel"                # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "UseFBDev"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "VideoKey"               # <i>
        #Option     "FlatPanel"              # [<bool>]
        #Option     "FPDither"               # [<bool>]
        #Option     "CrtcNumber"             # <i>
        #Option     "FPScale"                # [<bool>]
        #Option     "FPTweak"                # <i>
        #Option     "DualHead"               # [<bool>]
    Identifier  "Card0"
    Driver      "vesa"
    VendorName  "nVidia Corporation"
    BoardName   "C79 [GeForce G102M]"
    BusID       "PCI:2:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

_______________________________________

/Xorg.0.log

.     .     .

(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(II) VESA(0): Setting up VESA Mode 0x115 (800x600)
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0

______________________________________________________

record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500

Кто-нибудь знает что это такое ???
( в конфиге использовал драйвер vesa хотя у меня инвидиа ( грешил на драйвер) разницы поведения хсервера нет)

need help !

• Xorg 1.7.5,Aquarius, 00:06 , 03-Окт-10
  • Xorg 1.7.5,Dronissimo, 13:44 , 03-Окт-10
    • Xorg 1.7.5,Aquarius, 20:01 , 03-Окт-10
      • Xorg 1.7.5,Coder, 10:34 , 04-Окт-10

какая система, запущен ли hald, dbus?

> какая система, запущен ли hald, dbus?

=)Aquarius спасибо проблема решена ..
действительно надо было запустить hald и dbus
в старых версиях такого небыло %)

>> какая система, запущен ли hald, dbus?
> =)Aquarius спасибо проблема решена ..
> действительно надо было запустить hald и dbus
> в старых версиях такого небыло %)

пожалуйста!
сам наступал, грабли качественные 8)

Надо выпилить
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"

HAL сам найдет для Иксов все устройства ввода