Доброго времени суток, господа! Сложилась такая проблема: Необходио перевести офис на линукс, в том числе и терминальный сервер с 1с. В качестве терминалки я выбрал FreeNX, а чтоб не было проблем с организацией домена под линуксом, а так же не заморачиваться с установкой на все машины, решено исользовать Thinstation и превращать "толстые" клиенты в "тонкие". Сервер терминалов на OpenSuSe 11.3+FreeNX, с его настройкой особых проблем не возникло, к нему я уже пробовал подключаться со своей виндовой машины. Но вот с Thinstation получилась проблема, даже 2:
1) на одной машине он стартует, далее идёт прогрузка, и при старте иксов на мониторе появляется "Out of range" (Настройки разрешения и частоты превышены). Конфиг thinstation.conf.network с правильными настройками клал в корень tftp сервера, рядом с pxelinux.0, но оно не работает2) на других машинахпри старте идёт обращение к конфигам pxelinux.conf/*, на каждом из них машина висит по минуте и в результате вылетает ошибка о том, что файл не найден
Thinstation гружу, естественно, по сети.
Прогрузка проходит на сетевухе RTL8111/8168B, а на Atheros Ar8121/8113/8114 не грузит pxelinux.conf/*
Скажите, где я не прав? Из-за чего не работает Thinstation? и как это исравить?
Очень сложно что-то посоветовать не видя конфигов, спецификации железа, для которого грузится Thinstation, и файла build.conf для вашей сборки.
Кроме того, для случая с "Out of range", попробуйте в thinstation.conf.buildtime поиграть с параметрами SCREEN_RESOLUTION=1280х1024", X_MONITOR_OPTION1="TargetRefresh 85" или 60 и т.п.
Лучше всего тестировать с монитором с соотношением сторон 4:3.
> Очень сложно что-то посоветовать не видя конфигов, спецификации железа, для которого грузится
> Thinstation, и файла build.conf для вашей сборки.
> Кроме того, для случая с "Out of range", попробуйте в thinstation.conf.buildtime поиграть
> с параметрами SCREEN_RESOLUTION=1280х1024", X_MONITOR_OPTION1="TargetRefresh 85"
> или 60 и т.п.
> Лучше всего тестировать с монитором с соотношением сторон 4:3.Такого монитора, к сожалению, нет, .buildtime - это вкомпиленный конфиг, который будет по умолчанию? А куда класть конфиг для конкретных машин/групп машин? А то что-то .network не прокатывает...
build.conf:
#!Hardware
#!!System
#!!!Misc Modules
#module pcm # PCMCIA Cards
module serial # Serial Device Support
module acpi # Advanced Configuration and Power Interface support
module pcspkr # PC Speaker support#!!!AGP Modules
module agpgart # AGP bus module for use with AGP video cards
#module ali-agp # ALI chipset support
#module amd64-agp # AMD Opteron/Athlon64 on-CPU GART support
#module amd-k7-agp # AMD Irongate, 761, and 762 chipset support
module ati-agp # ATI chipset support
#module efficeon-agp # Transmeta Efficeon support
module intel-agp # Intel 440LX/BX/GX, I8xx and E7x05 chipset support
module nvidia-agp # NVIDIA nForce/nForce2 chipset support
module sis-agp # SiS chipset support
module via-agp # VIA chipset support#!!!PCMCIA/CardBus bridges
# Remember: Only include what you really need!
#module yenta_socket # CardBus card and (Yenta) bridge support (Very common)
#module i82365 # Intel i82365 compatible ISA-bus bridge support
#module tcic # Databook TCIC host bridge support (old systems)
#!!Network#!!!Ethernet 10-100 Mbit Modules
module 3c501 # 3c501 "EtherLink" support
module 3c503 # 3c503 "EtherLink II" support
module 3c505 # 3c505 "EtherLink Plus" support
module 3c507 # 3c507 "EtherLink 16" support
module 3c509 # 3c509/3c529 (MCA)/3c579 "EtherLink III" support
#module 3c515 # 3c515 ISA "Fast EtherLink"
module 3c59x # 3c590/3c900 series (592/595/597) "Vortex/Boomerang" support
module 8139too # RealTek RTL-8139 PCI Fast Ethernet Adapter support. VERY
# common in no-name network cards. Covers also 8129.
module 8139cp # RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support
#module ac3200 # Ansel Communications EISA 3200 support
module amd8111e # AMD 8111 (new PCI lance) support
#module at1700 # AT1700/1720 support
#module atl2 # Attansic L2. Atheros(R) L2 Ethernet Network Driver ver. 1.0.40.3
module b44 # Broadcom 4400 ethernet support
#module cs89x0 # CS89x0 support
#module de4x5 # Generic DECchip & DIGITAL EtherWORKS PCI/EISA
#module de2104x # Early DECchip Tulip (dc2104x) PCI support
#module depca # DEPCA, DE10x, DE200, DE201, DE202, DE422 support
#module dgrs # Digi Intl. RightSwitch SE-X support
#module dmfe # Davicom DM910x/DM980x support
#module hp100 # HP 10/100VG PCLAN (ISA, EISA, PCI) support
#module e100 # EtherExpressPro/100 support (e100, Alternate Intel driver)
#module e2100 # Cabletron E21xx support
#module eepro # EtherExpressPro support/EtherExpress 10 (i82595) support
#module eepro100 # EtherExpressPro/100 support (eepro100, original Becker driver)
#module eexpress # EtherExpress 16 support
#module epic100 # SMC EtherPower II
#module eth16i # ICL EtherTeam 16i/32 support
#module ewrk3 # EtherWORKS 3 (DE203, DE204, DE205) support
#module fealnx # Myson MTD-8xx PCI Ethernet support
module forcedeth # nForce Ethernet support (nVidia 0.62-Driver Package V1.30)
#module hp-plus # HP PCLAN+ (27247B and 27252A) support
#module hp # HP PCLAN (27245 and other 27xxx series) support
#module lp486e # LP486E on board Ethernet
module lance # AMD LANCE and PCnet (AT1500 and NE2100) support
#module ne io=0x300 # NE2000/NE1000 support
#module ne2k-pci # PCI version of NE-2000
#module natsemi # National Semiconductor DP8381x series PCI Ethernet support
#module ni5010 # Racal-Interlan (Micom) NI cards
#module ni52 # Racal-Interlan (Micom) NI cards
#module ni65 # Racal-Interlan (Micom) NI cards
module pcnet32 # AMD PCnet32 PCI support
module sis900 # SiS 900/7016 PCI Fast Ethernet Adapter support. Common
# in integrated motherboards
#module smc-ultra # SMC Ultra support
#module smc9194 # SMC 9194 support
#module starfire # Adaptec Starfire/DuraLAN support
#module sundance # Sundance Alta support
#module tlan # TI ThunderLAN support, Compaq Neteligent 10/100
#module typhoon # 3cr990 series "Typhoon" support
#module tulip # DECchip Tulip (dc21x4x) PCI support
module via-rhine # VIA Rhine support (both Rhine I and II). Common in integrated motherboards
#module wd # WD80*3 support
#module winbond-840 # Winbond W89c840 Ethernet support
#module xircom_cb # Xircom CardBus support
#module xircom_tulip_cb # Xircom Tulip-like CardBus support
#!!!Ethernet 1000 Mbit Modules
module acenic # Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support
module atl1 # Attansic L1. Atheros 1000M Ethernet Network Driver version=1.2.40.3
module atl1e # Attansic L1e. Atheros(R) AR8121/AR8113/AR8114 PCI-E Ethernet Network Driver ver. 1.0.1.0
module bnx2 # Broadcom NetXtremeII support
module dl2k # D-Link DL2000-based Gigabit Ethernet support
module e1000 # Intel(R) PRO/1000 Gigabit Ethernet support (PCI)
module e1000e # Intel(R) 82567LM (PCIe)
#module ns83820 # National Semiconductor DP83820 support
#module hamachi # Packet Engines Hamachi GNIC-II support
#module yellowfin # Packet Engines Yellowfin Gigabit-NIC support
module r8101 # Realtek 8101 Gigabit Ethernet support
module r8168 # Realtek 8168 Gigabit Ethernet support
module r8169 # Realtek 8169 Gigabit Ethernet support - version 6.011_2.6.16.5
module sis190 # SiS190/SiS191 gigabit ethernet support
#module skge # New SysKonnect GigaEthernet support
module sk98lin # Marvell Yukon Chipset / SysKonnect SK-98xx Support
#module sky2 # SysKonnect Yukon2 support
module tg3 # Broadcom Tigon3 ver. 3.99k
module via-velocity # VIA Velocity support#!!!Ethernet 10000 Mbit Modules
#module cxgb # Chelsio 10Gb Ethernet support
#module ixgb # Intel(R) PRO/10GbE support
#module s2io # S2IO 10Gbe XFrame NIC#!!!Token Ring modules
#module 3c359 # 3Com 3C359 Token Link Velocity XL adapter support
#module abyss # Madge Smart 16/4 PCI Mk2 support
#module ibmtr # IBM Tropic chipset based adapter support
#module lanstreamer # IBM Lanstreamer chipset PCI adapter support
#module olympic # IBM Olympic chipset PCI adapter support
#module smctr # SMC ISA/MCA adapter support
#module proteon # Proteon ISA support
#module skisa # SysKonnect TR4/16 ISA support
#module tmsisa # Generic TMS380 ISA support
#module tmspci # Generic TMS380 PCI support
#module mtok # Madge Token Ring Linux Driver
#!!!PCMCIA Network Modules
#module 3c589_cs # 3Com 3c589 PCMCIA support
#module 3c574_cs # 3Com 3c574 PCMCIA support
#module fmvj18x_cs # Fujitsu FMV-J18x PCMCIA support
#module pcnet_cs # NE2000 compatible PCMCIA support
#module nmclan_cs # New Media PCMCIA support
#module smc91c92_cs # SMC 91Cxx PCMCIA support
#module xirc2ps_cs # Xircom 16-bit PCMCIA support
#module axnet_cs # Asix AX88190 PCMCIA support
#module ibmtr_cs # IBM PCMCIA tokenring adapter support
#!!!Wireless PCMCIA Network Modules
#module ray_cs # Aviator/Raytheon 2.4MHz wireless support
#module netwave_cs # Xircom Netwave AirSurfer Pcmcia wireless support
#module wavelan_cs # AT&T/Lucent old WaveLAN Pcmcia wireless support
#!!!Wireless Modules
#module orinoco_pci # Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)
#module orinoco_cs # Hermes PCMCIA card support
#module airo_cs # Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards
#!!!Other Wireless Support
#module ath_pci # Madwifi Support
#module aes-i586 # WPA Supplicant Support
#!!Modem Modules
#module cdc-acm # USB Modem support (CDC ACM)
#!!USB Serial Converters
#module airprime # USB AirPrime CDMA Wireless Driver
#module anydata # USB AnyData CDMA Wireless Driver
#module belkin_sa # USB Belkin and Peracom Single Port Serial Driver
#module whiteheat # USB ConnectTech WhiteHEAT Serial Driver
#module digi_acceleport # USB Digi International AccelePort USB Serial Driver
#module cp2101 # USB CP2101 UART Bridge Controller
#module cypress_m8 # USB Cypress M8 USB Serial Driver
#module empeg # USB Empeg empeg-car Mark I/II Driver
module ftdi_sio # USB FTDI Single Port Serial Driver
#module visor # USB Handspring Visor / Palm m50x / Sony Clie Driver
#module ipaq # USB PocketPC PDA Driver
#module ir-usb # USB IR Dongle Serial Driver
#module io_edgeport # USB Inside Out Edgeport Serial Driver
#module io_ti # USB Inside Out Edgeport Serial Driver (TI devices)
#module garmin_gps # USB Garmin GPS driver
#module ipw # USB IPWireless (3G UMTS TDD) Driver
#module keyspan_pda # USB Keyspan PDA Single Port Serial Driver
#module kl5kusb105 # USB KL5KUSB105 (Palmconnect) Driver
#module kobil_sct # USB KOBIL chipcard reader
#module mct_u232 # USB MCT Single Port Serial Driver
#module pl2303 # USB Prolific 2303 Single Port Serial Driver
#module hp4x # USB HP4x Calculators support
#module ti_usb_3410_5052 # USB TI 3410/5052 Serial Driver
#module cyberjack # USB REINER SCT cyberJack pinpad/e-com chipcard reader
#module option # USB Option PCMCIA serial driver
#module omninet # USB ZyXEL omni.net LCD Plus Driver
#!!Sound Modules
#
#!!!ISA
##module snd-ad1816a # Analog Devices SoundPort AD1816A
#module snd-ad1848 # AD1848 (Analog Devices) or CS4248 (Cirrus Logic)
#module snd-cs4231 # CS4231 chips from Cirrus Logic
#module snd-cs4232 # CS4232 chips from Cirrus Logic
#module snd-cs4236 # CS4235,CS4236,CS4237B,CS4238B,CS4239 chips from Cirrus Logic
#module snd-es968 # ESS AudioDrive ES968 chips
#module snd-es1688 # ESS AudioDrive ES688 or ES1688 chips
#module snd-es18xx # ESS AudioDrive ES18xx chips
#module snd-gusclassic # Gravis UltraSound Classic soundcards
#module snd-gusextreme # Gravis UltraSound Extreme soundcards
#module snd-gusmax # Gravis UltraSound MAX soundcards
#module snd-interwave # AMD InterWave based soundcards (Gravis UltraSound Plug & Play
# STB SoundRage32, MED3210, Dynasonic Pro, Panasonic PCA761AW)
#module snd-interwave-stb # AMD InterWave based soundcards with a TEA6330T bass and
# treble regulator (UltraSound 32-Pro).
#module snd-opti92x-ad1848 # Opti 82C92x or OTI-601 chips and using an AD1848 codec
#module snd-opti92x-cs4231 # Opti 82C92x chips and using a CS4231 codec
#module snd-opti93x # Opti 82C93x chips
#module snd-sb8 # Creative Sound Blaster 1.0 2.0/Pro (8-bit) or 100% compatible
#module snd-sb16 # Sound Blaster 16 soundcards (including Plug and Play version)
#module snd-sbawe # Sound Blaster AWE soundcards (including Plug and Play version)
#module snd-wavefront # Turtle Beach Maui, Tropez, Tropez+ based on the Wavefront chip
#module snd-als100 # Avance Logic ALS100, ALS110, ALS120 and ALS200 chips
#module snd-azt2320 # Aztech Systems AZT2320 chip
#module snd-cmi8330 # C-Media CMI8330 chip
#module snd-dt019x # Diamond Technologies DT-019X or Avance Logic ALS-007 chips
#module snd-opl3sa2 # Yamaha OPL3-SA2 and OPL3-SA3 chips
#module snd-sgalaxy # Aztech Sound Galaxy soundcards
#module snd-sscape # Ensoniq SoundScape PnP soundcards
#
#!!!PCI
#module snd-ali5451 # AC97 intergrated device with ALi M5451 Audio Controller
# (M1535/M1535D/M1535+/M1535D+ south bridges)
module snd-atiixp # AC97 intergrated device with ATI chipsets
# (ATI IXP 150/200/250/300/400)
#module snd-au8810 # Aureal Advantage soundcards
#module snd-au8820 # Aureal Vortex soundcards
#module snd-au8830 # Aureal Vortex 2 soundcards
#module snd-azt3328 # Aztech AZF3328 (PCI168) soundcards
#module snd-cs46xx # Cirrus Logic CS4610/CS4612/CS4614/CS4615/CS4622/
# CS4624/CS4630/CS4280 chips
#module snd-cs4281 # Cirrus Logic CS4281 chips
#module snd-cs5535audio # CS5535/CS5536 Audio
#module snd-emu10k1 # Sound Blaster PCI 512, Live!, Audigy and
# E-mu APS (partially supported) soundcards
#module snd-emu10k1x # Emu10k1X (Dell OEM Version)
#module snd-korg1212 # Korg 1212IO soundcards
#module snd-mixart # Digigram miXart soundcards
#module snd-nm256 # NeoMagic NM256AV/ZX chips
#module snd-rme32 # RME Digi32, Digi32 PRO and Digi32/8 (Sek'd Prodif32,
# Prodif96 and Prodif Gold) audio devices
#module snd-rme96 # RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST soundcards
#module snd-rme9652 # RME Hammerfall (RME Digi9652/Digi9636) soundcards
#module snd-hdsp # RME Hammerfall DSP Audio soundcards
module snd-hda-intel # Intel HD Audio
#module snd-trident # Trident 4D-Wave DX/NX or SiS 7018 chips
#module snd-ymfpci # Yamaha PCI chips YMF724,YMF724F,YMF740,YMF740C,YMF744,YMF754
#module snd-als4000 # Avance Logic ALS4000 chips
#module snd-cmipci # C-Media CMI8338 or CMI8738 chips
#module snd-ens1370 # Ensoniq AudioPCI ES1370 chips
#module snd-ens1371 # Ensoniq AudioPCI ES1371 chips and Sound Blaster PCI 64 or 128
#module snd-es1938 # ESS Solo-1 (ES1938, ES1946, ES1969) chips
#module snd-es1968 # ESS Maestro 1/2/2E chips
#module snd-maestro3 # ESS Maestro 3 (Allegro) chips
#module snd-fm801 # ForteMedia FM801 chip
#module snd-ice1712 # ICE1712 (Envy24) chip
#module snd-ice1724 # ICE/VT1724/1720 (Envy24HT/PT) chips
module snd-intel8x0 # AC97 intergrated device with Intel/SiS/nVidia/AMD chipsets, or
# ALi chipsets using the M5455 Audio Controller
#module snd-sonicvibes # S3 SonicVibes chip
#module snd-sonicvibes # S3 SonicVibes chip
module snd-via82xx # AC97 intergrated device with VIA chipsets
#module snd-vx222 # Digigram VX222 soundcards#!!USB Devices
module usb-hid # Needed for USB keyboards and mice
module usb-storage # Needed for USB-Sticks
module usb-printer # Needed for USB-Printers
module usb-cdrom # Needed for USB CD-Rom Drives#!!Storage Devices
module ide-floppy # LS-120, Iomega Zip
module floppy # Floppy disk support
module ide-cd # CD-Rom Drive Support
module ahci # ACHI SATA support
module ata_piix # Intel piix SATA chipset support
module sata_nv # NVidia SATA support
module sata_promise # Promise SATA support
module sata_sil # Silicon Image SATA support
module sata_sil24 # Silicon Image 3124/3132 SATA support
module sata_sis # SIS 964/180 SATA support
module sata_via # VIA SATA support
#!!Filesystem Support
# Every mounted device needs a filesystem, so choose which ones you need.
module autofs4 # Automount and autofs support
module isofs # ISO9960 file system support for CDRoms
module udf # ISO13346 (UDF) file system
module vfat # Fat and VFat file system support
module ntfs # NTFS file system support
module ext2 # Ext2 file system support
module ext3 # Ext3 file system support
module supermount # Supermount support for auto unmounting of removable media
module nfs # NFS file system support
module smbfs # Samba client FS Support, allows you to mount smb filesystems#!!Miscellaneous
package hwclock # Utility to set system time from hardware clock
package rdate # Utility to obtain date & time from network
package ntp # Utility to obtain date & time from network (only use one of these)
#package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control
package sound-nasd # sound on your thin client from another computer or
# your remote session.
package iptables # IP Tables support#!!X related
#package xorg6-tinyx # TinyX Xvesa server (for low memory machines).
# Works with ICA too, but is slower. Don't choose any X modules with
# this server. You don't need anything else. Otherwise choose from
# Xfree 3 or 4 (4 is recommended).
#package xf3-svga # XF86_SVGA 3.3.6 server
#package xf3-s3 # XF86_S3 3.3.6 server
#package xf3-vmware # VMWare X server for development
#package xorg6vnc # Xorg VNC Server Module. With this package you can
# connect to the Thinstation client's desktop from a java
# browser at "http://<TS ip>:5800# --- Xorg6R9.0
# General Xorg6R9.0 video drivers
# This never gets old: only include what you really need!
#package xorg6-apm # Alliance ProMotion video driver
#package xorg6-ark # Ark Logic video driver
package xorg6-ati # ATI video driver
#package xorg6-chips # Chips and Technologies video driver
#package xorg6-cirrus # Cirrus Logic video driver
#package xorg6-cyrix # Cyrix video driver
#package xorg6-glint # GLINT/Permedia video driver
#package xorg6-i128 # Number 9 I128 video driver
package xorg6-i740 # Intel i740 video driver
package xorg6-i810 # Intel 8xx integrated graphics chipsets
package xorg6-mga # Matrox video driver
#package xorg6-neomagic # Neomagic video driver
#package xorg6-nsc # Nsc video driver
package xorg6-nv # NVIDIA video driver
package xorg6-nvidia # Driver for modern nVidia cards (ver. 185.18.14)
package xorg6-r128 # ATI Rage 128 video driver
package xorg6-radeon # ATI RADEON video driver
#package xorg6-rendition # Rendition video driver
package xorg6-s3 # S3 video driver
#package xorg6-s3virge # S3 ViRGE video driver
#package xorg6-savage # S3 Savage video driver
#package xorg6-siliconmotion # Silicon Motion video driver
#package xorg6-sis # SiS video driver
#package xorg6-tdfx # 3Dfx video driver
#package xorg6-tga # DEC TGA video driver
package xorg6-trident # Trident video driver
#package xorg6-tseng # Tseng Labs video driver
package xorg6-vesa # Generic VESA driver, use this if you don't know what to use
#package xorg6-vga # VGA 320x200 8 bit
package xorg6-via # Legacy VIA driver. Conflicts with xorg6-openchrome!!!
#package xorg6-unichrome # VIA unichrome for CLE266, KM400/KN400, K8M800/K8N800, PM800/PM880/CN400
# P4M800PRO, CX700, K8M890, P4M890, CN750, P4M900, VX800. Conflicts with xorg6-via!!!
package xorg6-vmware # VMware SVGA video driver
# Experimental drivers for Intel chip sets:
#package z-xorg6-intel # supports i740, i810, i915, i945, i950 and new models of GMA graphics like GMA3000
# Do not use manual X settings with this (only auto probe).
#package z-915resolution # adds support for 1440x900 and 1680x1050 modes. See http://915resolution.mango-lang.org/
#!!Keyboard layouts (Language/Country)
#package keymaps-ar # Arabic
#package keymaps-cs # Czech
#package keymaps-da # Danish
#package keymaps-de # German
#package keymaps-de_ch # German-Switzerland
#package keymaps-en_gb # English-Great Britian
#package keymaps-en_in # English-United States International
#package keymaps-en_nz # English-New Zealand
package keymaps-en_us # English-United States
#package keymaps-es # Spanish
#package keymaps-et # Estonian
#package keymaps-fr_be # French-Belgium
#package keymaps-fr_ca # French-Canada
#package keymaps-fr_ch # French-Switzerland
#package keymaps-fr # French
#package keymaps-hr # Croatian
#package keymaps-hu # Hungarian
#package keymaps-it # Italian
#package keymaps-ja # Japanese
#package keymaps-la # Latin
#package keymaps-lt # Lithuanian
#package keymaps-lv # Latvian
#package keymaps-mk # Macedonian
#package keymaps-nl # Dutch
#package keymaps-nl_be # Dutch-Belgium
#package keymaps-nb # Norwegian
#package keymaps-pl # Polish
#package keymaps-pt_br # Portuguise-Brazil
#package keymaps-pt # Portuguise
#package keymaps-ro # Romanian
package keymaps-ru # Russian
#package keymaps-sv_fi # Swedish-Finland
#package keymaps-sv # Swedish
#package keymaps-sl # Slovenian
#package keymaps-th # Thai
#package keymaps-tr # Turkish#!Applications
#!!Connection Package types. Choose *at least* one!
package rdesktop # X RDP client for Windows Terminal Services (ver 1.6). Conflicts with rdesktop-svn.
#package rdesktop-svn # Experimental version of rdesktop as of 31th Mar. 2010. Conflicts with rdesktop 1.6.
#package rdesktop_svga # SVGA RDP client. This is Version 1.1 of rdesktop. Only use this for low memory machines
#package vncviewer # VNC client (vncviewer)
#package ica # Citrix ICA client ver. 11
#package tarantella # Tarantella client support
#package ica_wfc # Citrix ICA manager ver. 11
#package xnest # XDM in a window client
package rxvt # Light Xterm Client (vt102)
#package xterm # Xterm Client (vt220)
#package ssh # Secure Shell client
#package tn5250 # 5250 terminal emulator
#package dillo # Dillo light web browser
package nx # No Machine NX client
#package 2x # 2X client
#package java # Java runtime
#package firefox # Firefox web browser ver. 3.0.x
#package flash # Flash plug-in ver. 9.0
#package kiosk # Sets Firefox in kiosk mode (full screen requires a WM)
#package thinlinc # Cendio Thinlinc terminal client ver. 3.0.0-1979
#package vmview # Open-vmware view client 4.0.1#!!Window Managers. Choose no more than 1 window manager.
# Not needed if you don't want to manage windows.
#package blackbox # "Blackbox" window manager. Makes TS a light workstation.
package icewm # "ICEWM" window manager. Makes TS a light workstation.
#package icewm-theme-bernstein # Select ONE icewm theme package.
#package icewm-theme-bluecrux # GTK2 style
#package icewm-theme-liquid # Mac "liquid" style
package icewm-theme-xp # Windows XP style#!!Window Manager Utils
package xtdesk # Adds icons to desktop
package ttf-freefont # GNU freefont true type font. Improves the looks of icewm, firefox etc. (3.5 MB)#!!Other services
#package www # Web access to client. From a browser: "http://<IP number>"
# The standard page is for general user settings, administrative access
# is on port 6800.
#package lp_server # Remote printing daemon (JetDirect compatible)
#package lpr # LPR Print Server, for use with samba-server package
#package lprng # LPRng Print Server, supports network based printing
package sshd # Dropbear secure shell server
#package tftpd # Built in tftpd server. Useful for making a tftpserver
# for thinstation on a WAN over a slow link.
#package samba-server # Samba server FS Support, allows you to share
# local floppy/cdrom/hd/printer to other Windows
# PCs. Needs supermount for removeable media.
package samba-client # Samba smbclient, gives a shell like environment to access an samba server
#package hdupdate # Package for updating TS images on a hardisk over a network connection
#package scp # Add ability to download files over internet using scp. This package
# adds some networking based options for downloading configuration files or
# in using hdupdate package.
#package openvpn # OpenVPN Client Support
#!!PCSCD Card Readers
#package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB)
#package ccidreader # Generic USB card reader
#!!Miscellaneous
#package e3 # Basic text editor. e3vi = vi style, e3ws = word star (Borland),
# e3pi = pico, e3em = emacs
#package hwdetect # Package with lshw.
#package debug # Debug support, adds strace, lspci, lsusb, ethtool and other commands
# Not recommended for normal use.#!Parameters
########################################
### --- Miscellaneous Parameters --- ###
########################################
#!!Basic
param rootpasswd gfzkmybr05 # Do Change! Console/telnet password for root
# If this is enabled, Telnetd will be enabled.
param xorgvncpasswd pass # VNC Access Password
param storagepasswd pass # Password for storage server
param dialuppasswd pass # Password for dialin account
param sambapasswd pass # Password for samba shares when using user mode security
param bootlogo true # Backgound picture during boot
param bootresolution 1024x768 # Resolution used during Thinstation boot
#param desktop ./background.jpg # Background image for the desktop. More images in backgrounds/
param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found
# during boot.
param basename thinstation # Used for all config/tftp/scp file names
param basepath . # Used to determine path to tftp/scp files
#param keyfile ./id_rsa # Path for private key file used for ssh/scp
#param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp
param localpkgs false # to determine is PKG files are to be loaded locally
param fulllocales false # Use full locale support for packages
param icaencryption false # Use ica encryption support, add 290k to image
#param haltonerror false # Will halt on error, default is true
param bootverbosity 3 # Increased vebosity when booting TS
# 0 no verbose messages
# 1 boot
# 2 network
# 4 init
# 8 kernel
# 16 modules
# 32 packages
# 64 email bootlog file to SMTP server & user set in
# thinstation.conf file. This will only work
# if networking is working.
#
# Combinations can be used (e.g.12 does Kernel and Module Messages)#!!Advanced
# Leave this alone unless you can't download (wget required on your Linux box):
param icaurl file://home/installs/linuxx86-11.100.158406.tar.gz
param firefoxurl http://thinstation.org/download/firefox/firefox-3.x-current....
param flashurl http://thinstation.org/download/2.2/install_flash_player_9_l...
param nxurl http://thinstation.org/download/nx/nxclient-3.x-current.i386...
param 2xurl http://downloads.2x.com/applicationserver/2xApplicationServe...
param javaurl file://home/installs/jre-1_5_0_06-linux-i586.bin
param tarantellaurl file://home/installs/tnci3li.tar
#param httpproxy http://192.168.1.2:8080
thinstation.conf.network:###############################################
# -- Thinstation sample configuration file -- #
###############################################
#
# This file must be named "thinstation.conf<xxx>" where <xxx> can be:
# .buildtime Defines the defaults build into the image (note the leading .)
# .network Default config file loaded from the TFTP server.
# .user Config file on local storage.
# -<name> Specific config file on the TFTP server for the terminal
# "name" (e.g. thinstation.conf-paul). Requires thinstation.hosts.
# .group-<id> Config file for a group of terminals (e.g. with printer setup
# for those terminal with local printers. Requires thinstation.hosts.
# -<IP> Specific config file on the TFTP server for the terminal with
# the IP number <IP> specified.
# -<MAC> Specific config file on the TFTP server for the terminal with
# the MAC address specified.##
# --- General Options
#
# AUDIO_LEVEL Audio Level for sound, 0-100
# KEYBOARD_MAP Keyboard layout
# TIME_ZONE Used to set time zone on TS client by entering the UTC offset.
# This can be set automatically if the appropriate dhcpc option is selected
# (Option 2, time offset in seconds)
# SYSLOG_SERVER Log server ip address or hostname.
# If the work "local" is used, then syslog starts logging locally
# If not specified syslogd is not loaded.
# USB_ENABLED Enable USB Drivers into memory if USB package is chosen
# USB_STORAGE_SYNC ON Safer writing
# OFF Faster writes to USB storage devices
# WARNING: This may lead to data corruption when the device is unplugged
# before buffers have been flushed
# USB_MOUNT_DIR Directory to use for mounting usbdisks (default: /mnt/usbdevice)
# USB_MOUNT_USELABEL Label to use for individual usb disks
# default is to use the device name (eg. sda1 - /mnt/usbdevice/sda1)
# NO use default ONLY
# YES will use label on usb volume if exists or fallback to default
# <label> will use label on usb volume if exists or <label> otherwise
# adds suffix of n (1,2,3,etc.) if duplicate labels found
# USB_MOUNT_OPTIONS additional mount options for usb devices (eg. utf8,shortname=win95)
# see mount documentation for details (man mount)
# DAILY_REBOOT Will reboot server if up over a day and one of the session
# types is closed
# AUTOPLAYCD If enabled this will autoplay music cds when inserted.
# CUSTOM_CONFIG Allows choosing custom boot config, On/Off
# RECONNECT_PROMPT This displays the reconnection/shutdown options for when a session is ended
#
# OFF No reconnect prompt
# ON Reconnect prompt will be displayed
# AUTO Automatic reconnect
# AUTOXX Automatic reconnect attempt after XX seconds - msg is displayed
# MENU Shows a menu with a shutdown and reconnection option
# MENUXX As MENU option, but the XX is a time period in minutes.
# After XX minutes shutdown will occur unless the reconnect option
# is choosenAUDIO_LEVEL=67
KEYBOARD_MAP=en_us
TIME_ZONE="UTC-12:30"
SYSLOG_SERVER=local
USB_ENABLED=On
#USB_STORAGE_SYNC=On
#USB_MOUNT_DIR="/mnt/usbdevice"
#USB_MOUNT_USELABEL="Yes"
#USB_MOUNT_OPTIONS="utf8,shortname=win95"
DAILY_REBOOT=On
#AUTOPLAYCD=On
CUSTOM_CONFIG=Off
RECONNECT_PROMPT=On##
# --- Session Defaults
# -- Default Settings for all sessions
#
# SCREEN Display number to run the X server on
# AUTOSTART ON Application will be executed immediately at startup
# OFF Application will appear in a menu to be started manually
# WORKSPACE Workspace in the window manager to run the application in
# ICONMODE MANUAL Default sessions are not created in window manager/xtdesk
# AUTO Default sessions types are created in window manager/xtdeskSCREEN=0
WORKSPACE=1
AUTOSTART=On
ICONMODE=AUTO##
# --- Session Details
#
# Note: # is a number equal to or greater than 0
#
# SESSION_#_TITLE Title description for SESSION. Needed for replimenu.
# SESSION_#_TYPE Package type, choose beetwen:
# - vncviewer Start vncviewer in X
# - rdesktop Start rdesktop in X
# - rdesktop_svga Start svga rdesktop, based on rdesktop 1.1 code
# for low memory machines
# - x Start x-terminal session (xdm)
# - xnest Start x-terminal session (xdm) from within blackbox
# - ssh Start ssh client in linux console
# - telnet Start telnet client in linux console
# - ica Start Citrix ICA client in X
# - ica_wfc Start ICA Manager
# - blackbox Start blackbox window manager session
# - icewm Start icewm window manager session
# - dillo Start Web Browser in X
# - tftpd Start tftp daemon
# - tarantella Start tarantella client
# - rxvt Start light xterm client
# - xterm Start xterm client
# - tn5250 Start AS400 client in linux console
# - nx Start NX Client Session
# SESSION_#_SCREEN Display number to run the X server on
# SESSION_#_AUTOSTART ON Application will be executed immediately at startup
# OFF Application will appear in a menu to be started manually
# SESSION_#_CUSTOM_CONFIG ON Allows choosing custom config for when session starts
# OFF Session boots normally
# SESSION_#_ICON ON Places Icon on Desktop if package xtdesk is selected and
# in Window Manager Main Menu
# SUBMENU Places Icon on Desktop if package xtdesk is selected and
# in a Submenu within the window manager
# SESSION_#_WORKSPACE Workspace to run program on in a window manager
# SESSION_#_type_SERVER IP address/hostname of the server
# SESSION_#_type_OPTIONS Command line options for the session type
#
# SESSION_#_type_specific This allows you to specify specific config file details for certain session
# types. Currently support is NX and ICA. Any configuration file setting
# can be changed with this setting. An example of this is
# SESSION_0_NX_GENERAL_DESKTOP="Gnome"
# SESSION_0_ICA_APPSRV_USEFULLSCREEN="Yes"
# See your application manual for documentation on the settings which
# can be used.
# Individual Session Settings, override defaults
#
# IMPORTANT: Make sure you minimum have a SESSION_0. Otherwise you will get an error
# on boot. You may have additional sessions: SESSION_1, SESSION_2 ...
# SESSION_0 is on ctrl-alt-F3
# SESSION_1 is on ctrl-alt-F4
# ... etc.
#SESSION_#_TYPE=icewm# -- NX Options
#NX_NOPASSWORD="ON" # disables the functionality to save the username and password
# in the NX session file. This is handy when an NX terminal has
# multiple users and the administrator needs to enforce the keying
# in of the NX user credentials before each session. It ensures
# that only pre-established users can access the NX server via NX client.
#NX_NOEXIT="ON" # disables all Close buttons in the NX client GUI. When the user closes
# or loses a running session, a new NX client dialog box automatically
# appears on the desktop, ready for the next user to start a new session
# or for the current user to re-connect to his lost session. This is
# welcome where client terminals have multiple users who need to access
# their session quickly and easily.
#NX_NOCONFIG="ON" # disables all user possibilities to configure new session setups or
# modify existing ones. This allows the administrator to completely lock
# down the types of sessions a user can run. This feature works only when
# the NX client is started with the --session or --plugin option.#SESSION_#_NX_LOGIN_USER="Thinstation"
#SESSION_#_TYPE=nx
#SESSION_#_TITLE="Gnome"
#SESSION_#_NX_ADVANCED_ENABLE_SSL_ENCRYPTION="true"
#SESSION_#_NX_GENERAL_DESKTOP="Gnome"
#SESSION_#_NX_GENERAL_SERVER_HOST="nx-server-ip"
#SESSION_#_NX_GENERAL_REMEMBER_PASSWORD="true"
#SESSION_#_NX_GENERAL_RESOLUTION="fullscreen"
#SESSION_#_NX_GENERAL_SESSION="Unix"#SESSION_#_TYPE=nx
#SESSION_#_TITLE="Firefox"
#SESSION_#_NX_ADVANCED_ENABLE_SSL_ENCRYPTION="true"
#SESSION_#_NX_GENERAL_DESKTOP="Console"
#SESSION_#_NX_GENERAL_SERVER_HOST="nx-server-ip"
#SESSION_#_NX_GENERAL_REMEMBER_PASSWORD="true"
#SESSION_#_NX_GENERAL_COMMAND_LINE="/usr/local/firefox/firefox"
#SESSION_#_NX_GENERAL_SESSION="Unix"
#SESSION_#_NX_GENERAL_ONLY_CONSOLE="false"#SESSION_#_TYPE=nx
#SESSION_#_TITLE="Windows"
#SESSION_#_NX_ADVANCED_ENABLE_SSL_ENCRYPTION="true"
#SESSION_#_NX_GENERAL_DESKTOP="RDP"
#SESSION_#_NX_GENERAL_RESOLUTION_VALUE="fullscreen"
#SESSION_#_NX_GENERAL_SERVER_HOST="nx-server-ip"
#SESSION_#_NX_GENERAL_SESSION="Windows"
#SESSION_#_NX_WINDOWS_SESSION_SERVER="windows-server-ip"
#SESSION_#_NX_WINDOWS_SESSION_AUTHENTICATION="1"#SESSION_0_TYPE=nx
#SESSION_0_TITLE="xfce4"
#SESSION_0_NX_ADVANCED_ENABLE_SSL_ENCRYPTION="true"
#SESSION_0_NX_GENERAL_DESKTOP="console"
#SESSION_0_NX_GENERAL_CUSTOM_UNIX_DESKTOP="application"
#SESSION_0_NX_GENERAL_SERVER_HOST="10.0.0.7"
#SESSION_0_NX_GENERAL_REMEMBER_PASSWORD="true"
#SESSION_0_NX_GENERAL_COMMAND_LINE="/usr/bin/startxfce4"
#SESSION_0_NX_GENERAL_SESSION="Unix"
#SESSION_0_NX_GENERAL_ONLY_CONSOLE="false"#To support a USB and CDROM share for NX, include:
# Client shares requires Samba server and Samba client:
SESSION_#_NX_SERVICES_SHARES="true"
SESSION_#_NX_SERVICES_AUDIO="false"
#
SESSION_#_NX_SHARE0_ALIAS="\$(SHARES)/usb" # make sure to escape $ chars
SESSION_#_NX_SHARE0_PASSWORD="DO NOT EDIT" # Don't touch. The proper
PW is supplied automatically
SESSION_#_NX_SHARE0_SHARENAME="usb"
SESSION_#_NX_SHARE0_TYPE="disk"
SESSION_#_NX_SHARE0_USERNAME="root"
#
SESSION_#_NX_SHARE1_ALIAS="\$(SHARES)/cdrom" # make sure to escape $ chars
SESSION_#_NX_SHARE1_PASSWORD="DO NOT EDIT" # Don't touch. The proper
PW is supplied automatically
SESSION_#_NX_SHARE1_SHARENAME="cdrom"
SESSION_#_NX_SHARE1_TYPE="disk"
SESSION_#_NX_SHARE1_USERNAME="root"
#
SESSION_#_NX_SHARE_CHOSEN_SHARE_NUMBER="2" # Total number of Samba
shares. Do set properly!
SESSION_#_NX_SHARE_CHOSEN_SHARE0="Share0"
SESSION_#_NX_SHARE_CHOSEN_SHARE1="Share1"
# The -a option here specifies the color depth
# Note certain servers support certain color depths, wrong settings with this
# May cause your connection to fail.
#SESSION_#_TITLE="Big Bad Server Donald"
#SESSION_#_TYPE=rdesktop
#SESSION_#_SCREEN=1
#SESSION_#_SCREEN_POSITION=2
#SESSION_#_RDESKTOP_SERVER=192.168.1.1
#SESSION_#_RDESKTOP_OPTIONS="-u user -p password -a 16"
#SESSION_#_AUTOSTART=Off#SESSION_#_TITLE="Big Bad Server Road Runner"
#SESSION_#_TYPE=rdesktop
#SESSION_#_SCREEN=1
#SESSION_#_RDESKTOP_SERVER=192.168.1.1
#SESSION_#_RDESKTOP_OPTIONS="-u 'fred' -a 8"
#SESSION_#_AUTOSTART=Off#Example on USB Printer Redirection for Rdesktop
#SESSION_#_TITLE="Remote Desktop 24-bit (usb printer)"
#SESSION_#_TYPE=rdesktop
#SESSION_#_RDESKTOP_SERVER=192.168.1.1
#SESSION_#_RDESKTOP_OPTIONS="-a 24 -x b -r printer:usb='DYMO LabelWriter 400 Turbo'"
#SESSION_#_AUTOSTART=Off
#SESSION_#_TYPE=rxvt
#SESSION_#_SCREEN=1
#SESSION_#_RXVT_OPTIONS="-bg black -cr green -fg white -C -sl 500"
##
# --- X Server Options
#
# SCREEN_RESOLUTION Screen resolutions available in the workstations
# SCREEN_COLOR_DEPTH Number of bits per pixel (8,16,24)
# SCREEN_HORIZSYNC Monitor horizontal sync frequency in kHz.
# If left blank Xorg will try to detect with DDC
# SCREEN_VERTREFRESH Monitor vertical refresh frecuency in Hz.
# If left blank Xorg will try to detect with DDC
# SCREEN_X_FONT_SERVER IP address or hostname of the font server for X
#
# Screen Saver Settings (put zero for "never")
# SCREEN_BLANK_TIME Minutes to X session goes blank
# SCREEN_STANDBY_TIME Minutes to X session goes into standby mode
# SCREEN_SUSPEND_TIME Minutes to X session goes into suspend mode
# SCREEN_OFF_TIME Minutes to X session turn off
#
# DONT_VT_SWITCH_STATE Disallows the use of the Ctrl+Alt+Fn sequence (true/false)
# DONT_ZAP_STATE Disallows the use of the Ctrl+Alt+Backspace sequence.
# This sequence restarts the X server (true/false)# MOUSE_PROTOCOL Mouse protocol type (Microsoft, PS/2, etc.)
# (mouse is autodetected, use this only if it fails)
# MOUSE_DEVICE Mouse device: /dev/ttyS0 -> COM1
# /dev/ttyS1 -> COM2
# /dev/ttyS2 -> COM3
# /dev/ttyS3 -> COM4
# /dev/psaux -> PS/2 mouse port
# /dev/input/mice -> USB mouse (needs USB package)
# MOUSE_RESOLUTION Mouse resolution
# MOUSE_ACCELERATION Mouse acceleration
# X_NUMLOCK Set numlock state on boot
# X_COOKIE Will set X Cookie if specified
# -- Advanced XServer Options - Experts Only
# X_DRIVER_NAME Driver for X, this will override the autodetection scripts
# X_DRIVER_BUSID Screen Card BusID
# X_DRIVER_OPTION1-5 Addditional options for driver
# X_MONITOR_OPTION1-5 Addditional options for monitor
# X_MONITOR_MODELINE Add user defined ModeLineSCREEN_RESOLUTION="1024x768 | 800x600 | 640x480 | *"
SCREEN_COLOR_DEPTH="24 | 16 | 8 | *"
SCREEN_HORIZSYNC="30-64 | *"
SCREEN_VERTREFRESH="56-87 | 60 | 56 | 70 | 72 | 75"
#SCREEN_X_FONT_SERVER=192.168.1.2:7100
SCREEN_BLANK_TIME=10
SCREEN_STANDBY_TIME=20
SCREEN_SUSPEND_TIME=30
SCREEN_OFF_TIME=60
DONT_VT_SWITCH_STATE=false
DONT_ZAP_STATE=false
#MOUSE_PROTOCOL=PS/2
#MOUSE_DEVICE=/dev/psaux
MOUSE_RESOLUTION=100
#MOUSE_ACCELERATION=1/2
X_COOKIE=36d71ab65c10ef065702c111a3d31593
#X_NUMLOCK=Off
# -- Advanced Options - Experts Only
#X_DRIVER_NAME="mga"
#X_DRIVER_BUSID="PCI:1:0:0"
X_DRIVER_OPTION1="swcursor On"
#X_DRIVER_OPTION2="ActiveDevice CRT"
#X_DRIVER_OPTION3="noDDC Off"
#X_DRIVER_OPTION4="UseBios Off"
#X_MONITOR_OPTION1="DPMS On"
#X_MONITOR_OPTION2="TargetRefresh 60"
#X_MONITOR_MODELINE='"1680x1050" 146.2 1680 1784 1960 2240 1050 1053 1059 1089 -HSync -VSync'##
# --- Samba Options
#
# SAMBA_SERVER_ENABLED Enable Samba Server Daemons, On/Off
# SAMBA_SECURITY Type of security, USER, DOMAIN, SERVER
# SAMBA_SERVER Server for security
# SAMBA_WINS Server Name to Enable Samba to be a WINS Client
# SAMBA_HARDDISK Enable Harddrive support, On/Off
# SAMBA_CDROM Enable CDRom Support, On/Off
# SAMBA_FLOPPY Enable Floppy Support, On/Off
# SAMBA_PRINTER Enable Printer Support, On/Off
# SAMBA_USB Enable USB Support, On/Off#SAMBA_SERVER_ENABLED=Off
#SAMBA_WORKGROUP=BigPeople
#SAMBA_SECURITY=Server
#SAMBA_SERVER=BadMan
#SAMBA_WINS=BadMan
#SAMBA_HARDDISK=Off
#SAMBA_CDROM=On
#SAMBA_FLOPPY=On
#SAMBA_PRINTER=On
#SAMBA_USB=Off
##
# --- PKG Options
#
# PKG_PACKAGES Choice of packages to download for PKG
# You can also use PKG_PACKAGES1-8 for additional package selections
# This is useful for using multiple network group files
# PKG_PREFIX Download PKGs from a subdir of /tftpboot or PKG Path if PKG_PATH
# is set in thinstation.conf
# PKG_PATH Path to PKG files if not using tftpboot
# Floppy: /mnt/floppy
# CD-ROM: /mnt/cdrom
# HD: /mnt/disc/hdX/part1 (first disc, first partition)
# NFS: /mnt/nfs
# Samba: /mnt/smb
# MOD_PACKAGES Choice of modules to download for MPKG
# You can also use MOD_PACKAGES1-8 for additional package selections
# This is useful for using multiple network group files
# MOD_PREFIX Downloads and insmod's a module from a subdir of /tftpboot
# if MOD_PREFIX is set in thinstation.conf#PKG_PACKAGES="blackbox rxvt"
#PKG_PREFIX=pkg
#PKG_PATH=/mnt/cdrom
#MOD_PACKAGES="usb-hid usb-storage"
#MOD_PREFIX=modules
##
# --- Networking Options
#
# NET_HOSTNAME Hostname to use if not using a thinstation.hosts file, note
# that the machine MAC address will replace any * if used.
# NET_SMTP_SERVER Email server address for error logs
# NET_SMTP_EMAIL Email address of administrator
# NET_TIME_SERVER Time server on network to sync to, uses rdate
# NET_TELNETD Enables built-in telnetd server package
# NET_REMOTE_ACCESS_FROM List of hostnames/ip address accepted by the server
# for remote control, used by telnetd and www packages
#
# -- Mounting networked filesystems --
#
# NET_NFS_SERVER This is the path to the NFS server, ie
# server:/path/to/share.
# NET_SMB_SERVER This is the path to the SMB server, ie
# server:/path/to/share.
# NET_SMB_WORKGROUP Workgroup of samba server
# NET_SMB_USER This is the username for SMB mounts, password is
# defined at build time in build.conf#NET_HOSTNAME=donald
NET_HOSTNAME=ts_*
#NET_SMTP_SERVER=donald
#NET_SMTP_EMAIL=donald@duck.org.nz
#NET_TIME_SERVER=mickey
NET_TELNETD_ENABLED=On
NET_REMOTE_ACCESS_FROM="duck.quak.org.au 192.168.0.0 .disney.us"
#NET_NFS_SERVER=bigserver:/opt/thinstation
#NET_SMB_USER=duck
# -- For use in thinstation.conf.buildtime only:
#
# NET_USE_DHCP Enable DHCP Resolution, On/Off
# NET_IP_ADDRESS IP Address of client
# NET_MASK Network mask of client
# NET_GATEWAY IP Address of gateway
# NET_DHCP_DELAY Delay before continuing script after bringing up interface, only needed if
# using spanning tree "port discovery" in a switched environment. Default is 0 seconds.
# NET_FILE_METHOD Method to download files, ie scp or tftp, scp is only available if package ssh
# is selected in build as a "package".
# NET_FILE_ENABLED Use server for config file, On/Off
# NET_FILE_USER User to connect to SCP server as
# NET_FILE_ALTERNATE Alternate server for vmware or non-standard dhcp servers
# NET_DNS1 DNS Server 1
# NET_DNS2 DNS Server 2
# NET_DNS_SEARCH Default DNS domain to search#NET_USE_DHCP=Off
#NET_IP_ADDRESS=192.168.0.1
#NET_MASK=255.255.255.0
#NET_GATEWAY=192.168.0.254
#NET_DHCP_DELAY=30
#NET_FILE_ENABLED=Off
#NET_FILE_METHOD=tftp
#NET_FILE_USER=not_needed_for_tftp
#NET_FILE_ALTERNATE=192.168.0.4
#NET_DNS1=192.168.0.2
#NET_DNS2=192.168.0.3
#NET_DNS_SEARCH=cartoons.org.nz##
# --- Permanent Storage Options
#
# STORAGE_PATH Path to where storage device is mounted to save
# profile settings. This should be one of
# /mnt/usbdevice/sdX/partX or disc
# /mnt/floppy
# /mnt/disc/hdX/partX
# /mnt/nfs
# /mnt/smb
#
# Note that the profile settings are stored under
# a subfolder for this path. So the path to the
# stored settings would be something like
# /mnt/floppy/thinstation.profile
# See the FAQ on the website for more details on this
#
# Also checkout README.IMPORTANT for the valid
# config files which you can place here
# a typical file to store config file settings is
# /mnt/floppy/thinstation.profile/thinstation.conf.user
#
# Also note that the .profile can be changed by using
# the below STORAGE_PREFIX
# STORAGE_PREFIX This is prefex for the folder name to store settings
# in on the storage device. You can also use one of the
# special characters below.
#
# M = Mac Address
# H = Hostname
# I = Ip Address
#
# Note default prefix for storing the profile is
# .profile
# STORAGE_CONFIG1-8 This is the path for any user defined settings
# which will always override the profile path above
# The files are tried on order on each device specified
#STORAGE_PATH=/mnt/nfs
#STORAGE_PREFIX=H
#STORAGE_CONFIG1=/mnt/floppy
#STORAGE_CONFIG2=/mnt/cdrom
#STORAGE_CONFIG3=/mnt/disc/hda/part1
#STORAGE_CONFIG4=/mnt/usbdevice/sda/part1
##
#**** EXPERIMENTAL ****
# Dual Head Support
#
# This allows two seperate X sessions to be started with seperate input devices. This allows
# effectively two seperate machines within the same PC. You will need seperate screen cards
# to enable this. It is best to use with 1 AGP card and 1 PCI card.# Check out http://www.ltn.lv/~aivils/eng-video.html for a list of known compatable screen cards
# Input Device support should be:
#
# Primary mouse and keyboard PS/2
# Secondary mouse and keyboard USB
#
# There is some basic detection scripts for this, but these will need to be improved in TS 3.0.
# If thinstation doesn't detect both a USB keyboard and mouse it will default back to dual
# screen support, not dual head.
#
# This is not considered stable. If you exit the session, or try to change to a console screen
# with Alt-F1 etc... it will probably crash the machine. If it doesn't work with your hardware
# there is nothing that can be done about it.# The kernel Advanced Power Management module is disabled when using dual screen as it causes the
# second screen to crash.# Note the below option only supports 1-2, anything more than two won't work. This is provided
# for future development, to create a machine with more than two seperate sessions.# SESSION_#_SCREEN_POSITION 1-X When using dual screen support you can specify the position
# of each session. This allows to seperate sessions to be on
# seperate screens. If only 1 session is in use, this option will
# make no differnece. You can specify between 1+ positions
Да, и еще судя по логам tftp сервера после загрузки initrd больше он ничего грузить не пытается
Проблема пока еще актуальна, никаких результатов пока нет...
ПРоблемма с сетевой Atheros AR8121
Сам столкнулся - решения пока нет...
> ПРоблемма с сетевой Atheros AR8121
> Сам столкнулся - решения пока нет...Я тут в очередной раз попытался завести его на атеросе, собрал на каком-то из ТSоМов... И... О чудо! Оно завелось!!! Но повторно завести его после пересборки не удалось :(