URL: https://www.opennet.me/cgi-bin/openforum/vsluhboard.cgi
Форум: vsluhforumID15
Нить номер: 3995
[ Назад ]
Исходное сообщение
"nvidia 8400 + 19' LCD"
Отправлено Wagner , 22-Фев-13 19:31 
Доброго времени суток. Наконец-то поставил вместо старого црт на 17" не менее старый 19" жк монитор. Разрешение сдало 640х480. После удаления xorg.conf максимально возможное - 1024х678, однако монитор умеет до 2480х1024. Вопрос: где я дурак?

# uname -a
Linux workstation 3.7.5-1-ARCH #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013 x86_64 GNU/Linux
# cat /var/log/Xorg.0.log
[  2957.700] 
X.Org X Server 1.13.2
Release Date: 2013-01-24
[  2957.700] X Protocol Version 11, Revision 0
[  2957.700] Build Operating System: Linux 3.7.4-1-ARCH x86_64 
[  2957.700] Current Operating System: Linux workstation 3.7.5-1-ARCH #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013 x86_64
[  2957.700] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bf3c4f6a-7916-46c3-b45e-5d0bb57e2515 ro quiet
[  2957.700] Build Date: 25 January 2013  09:33:50AM
[  2957.700]  
[  2957.700] Current version of pixman: 0.28.2
[  2957.700]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  2957.701] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2957.701] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 22 23:16:03 2013
[  2957.701] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2957.702] (==) No Layout section.  Using the first Screen section.
[  2957.702] (==) No screen section available. Using defaults.
[  2957.702] (**) |-->Screen "Default Screen Section" (0)
[  2957.702] (**) |   |-->Monitor "<default monitor>"
[  2957.702] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  2957.702] (==) Automatically adding devices
[  2957.702] (==) Automatically enabling devices
[  2957.702] (==) Automatically adding GPU devices
[  2957.702] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  2957.702]     Entry deleted from font path.
[  2957.702] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  2957.702]     Entry deleted from font path.
[  2957.703] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  2957.703]     Entry deleted from font path.
[  2957.703]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  2957.703] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  2957.703]     Entry deleted from font path.
[  2957.703]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  2957.703] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
[  2957.703] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2957.703] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2957.703] (II) Loader magic: 0x7fcc40
[  2957.703] (II) Module ABI versions:
[  2957.703]     X.Org ANSI C Emulation: 0.4
[  2957.703]     X.Org Video Driver: 13.1
[  2957.703]     X.Org XInput driver : 18.0
[  2957.703]     X.Org Server Extension : 7.0
[  2957.706] (--) PCI:*(0:1:0:0) 10de:0422:1462:0740 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000e800/128, BIOS @ 0x????????/131072
[  2957.706] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2957.706] Initializing built-in extension Generic Event Extension
[  2957.707] Initializing built-in extension SHAPE
[  2957.707] Initializing built-in extension MIT-SHM
[  2957.707] Initializing built-in extension XInputExtension
[  2957.707] Initializing built-in extension XTEST
[  2957.707] Initializing built-in extension BIG-REQUESTS
[  2957.707] Initializing built-in extension SYNC
[  2957.707] Initializing built-in extension XKEYBOARD
[  2957.707] Initializing built-in extension XC-MISC
[  2957.707] Initializing built-in extension SECURITY
[  2957.707] Initializing built-in extension XINERAMA
[  2957.707] Initializing built-in extension XFIXES
[  2957.707] Initializing built-in extension RENDER
[  2957.707] Initializing built-in extension RANDR
[  2957.707] Initializing built-in extension COMPOSITE
[  2957.707] Initializing built-in extension DAMAGE
[  2957.707] Initializing built-in extension MIT-SCREEN-SAVER
[  2957.707] Initializing built-in extension DOUBLE-BUFFER
[  2957.707] Initializing built-in extension RECORD
[  2957.707] Initializing built-in extension DPMS
[  2957.707] Initializing built-in extension X-Resource
[  2957.707] Initializing built-in extension XVideo
[  2957.707] Initializing built-in extension XVideo-MotionCompensation
[  2957.707] Initializing built-in extension XFree86-VidModeExtension
[  2957.707] Initializing built-in extension XFree86-DGA
[  2957.707] Initializing built-in extension XFree86-DRI
[  2957.707] Initializing built-in extension DRI2
[  2957.707] (II) LoadModule: "glx"
[  2957.708] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2957.747] (II) Module glx: vendor="NVIDIA Corporation"
[  2957.747]     compiled for 4.0.2, module version = 1.0.0
[  2957.747]     Module class: X.Org Server Extension
[  2957.747] (II) NVIDIA GLX Module  313.18  Wed Jan  9 15:34:35 PST 2013
[  2957.747] Loading extension GLX
[  2957.747] (==) Matched nouveau as autoconfigured driver 0
[  2957.747] (==) Matched nvidia as autoconfigured driver 1
[  2957.747] (==) Matched nv as autoconfigured driver 2
[  2957.747] (==) Matched vesa as autoconfigured driver 3
[  2957.747] (==) Matched modesetting as autoconfigured driver 4
[  2957.747] (==) Matched fbdev as autoconfigured driver 5
[  2957.747] (==) Assigned the driver to the xf86ConfigLayout
[  2957.747] (II) LoadModule: "nouveau"
[  2957.760] (WW) Warning, couldn't open module nouveau
[  2957.760] (II) UnloadModule: "nouveau"
[  2957.760] (II) Unloading nouveau
[  2957.760] (EE) Failed to load module "nouveau" (module does not exist, 0)
[  2957.760] (II) LoadModule: "nvidia"
[  2957.760] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  2957.762] (II) Module nvidia: vendor="NVIDIA Corporation"
[  2957.762]     compiled for 4.0.2, module version = 1.0.0
[  2957.762]     Module class: X.Org Video Driver
[  2957.762] (II) LoadModule: "nv"
[  2957.762] (WW) Warning, couldn't open module nv
[  2957.762] (II) UnloadModule: "nv"
[  2957.762] (II) Unloading nv
[  2957.762] (EE) Failed to load module "nv" (module does not exist, 0)
[  2957.762] (II) LoadModule: "vesa"
[  2957.763] (WW) Warning, couldn't open module vesa
[  2957.763] (II) UnloadModule: "vesa"
[  2957.763] (II) Unloading vesa
[  2957.763] (EE) Failed to load module "vesa" (module does not exist, 0)
[  2957.763] (II) LoadModule: "modesetting"
[  2957.763] (WW) Warning, couldn't open module modesetting
[  2957.763] (II) UnloadModule: "modesetting"
[  2957.763] (II) Unloading modesetting
[  2957.763] (EE) Failed to load module "modesetting" (module does not exist, 0)
[  2957.763] (II) LoadModule: "fbdev"
[  2957.764] (WW) Warning, couldn't open module fbdev
[  2957.764] (II) UnloadModule: "fbdev"
[  2957.764] (II) Unloading fbdev
[  2957.764] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  2957.764] (II) NVIDIA dlloader X Driver  313.18  Wed Jan  9 15:15:26 PST 2013
[  2957.764] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  2957.764] (++) using VT number 7
[  2957.764] (II) Loading sub module "wfb"
[  2957.764] (II) LoadModule: "wfb"
[  2957.764] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  2957.765] (II) Module wfb: vendor="X.Org Foundation"
[  2957.765]     compiled for 1.13.2, module version = 1.0.0
[  2957.765]     ABI class: X.Org ANSI C Emulation, version 0.4
[  2957.765] (II) Loading sub module "ramdac"
[  2957.765] (II) LoadModule: "ramdac"
[  2957.765] (II) Module "ramdac" already built-in
[  2957.765] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[  2957.765] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  2957.765] (==) NVIDIA(0): RGB weight 888
[  2957.766] (==) NVIDIA(0): Default visual is TrueColor
[  2957.766] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  2957.766] (**) NVIDIA(0): Enabling 2D acceleration
[  2958.253] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[  2958.255] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G86) at PCI:1:0:0 (GPU-0)
[  2958.255] (--) NVIDIA(0): Memory: 524288 kBytes
[  2958.255] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.90
[  2958.255] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  2958.259] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
[  2958.259] (--) NVIDIA(0):     CRT-0
[  2958.259] (--) NVIDIA(0):     CRT-1 (connected)
[  2958.259] (--) NVIDIA(0):     TV-0
[  2958.259] (--) NVIDIA(0):     DFP-0
[  2958.259] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[  2958.259] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[  2958.259] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[  2958.259] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[  2958.259] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[  2958.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2958.259] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[  2958.260] (**) NVIDIA(0):     all display devices.)
[  2958.264] (==) NVIDIA(0): 
[  2958.264] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  2958.264] (==) NVIDIA(0):     will be used as the requested mode.
[  2958.264] (==) NVIDIA(0): 
[  2958.264] (II) NVIDIA(0): Validated MetaModes:
[  2958.264] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[  2958.264] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[  2958.288] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[  2958.289] (WW) NVIDIA(0):     from CRT-1's EDID.
[  2958.289] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[  2958.289] (--) Depth 24 pixmap format is 32 bpp
[  2958.289] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[  2958.293] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  2958.293] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  2958.293] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  2958.293] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  2958.293] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  2958.293] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  2958.293] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  2958.293] (II) NVIDIA(0):     Config Options in the README.
[  2958.298] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[  2958.342] Loading extension NV-GLX
[  2958.367] (==) NVIDIA(0): Disabling shared memory pixmaps
[  2958.367] (==) NVIDIA(0): Backing store disabled
[  2958.367] (==) NVIDIA(0): Silken mouse enabled
[  2958.367] (==) NVIDIA(0): DPMS enabled
[  2958.368] Loading extension NV-CONTROL
[  2958.368] Loading extension XINERAMA
[  2958.368] (II) Loading sub module "dri2"
[  2958.368] (II) LoadModule: "dri2"
[  2958.368] (II) Module "dri2" already built-in
[  2958.369] (II) NVIDIA(0): [DRI2] Setup complete
[  2958.369] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  2958.369] (--) RandR disabled
[  2958.382] (II) Initializing extension GLX
[  2958.470] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  2958.470] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2958.470] (II) LoadModule: "evdev"
[  2958.470] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2958.471] (II) Module evdev: vendor="X.Org Foundation"
[  2958.471]     compiled for 1.13.0, module version = 2.7.3
[  2958.471]     Module class: X.Org XInput Driver
[  2958.471]     ABI class: X.Org XInput driver, version 18.0
[  2958.471] (II) Using input driver 'evdev' for 'Power Button'
[  2958.471] (**) Power Button: always reports core events
[  2958.471] (**) evdev: Power Button: Device: "/dev/input/event2"
[  2958.471] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2958.471] (--) evdev: Power Button: Found keys
[  2958.471] (II) evdev: Power Button: Configuring as keyboard
[  2958.471] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  2958.471] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2958.471] (**) Option "xkb_rules" "evdev"
[  2958.471] (**) Option "xkb_model" "evdev"
[  2958.471] (**) Option "xkb_layout" "us"
[  2958.527] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2958.527] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2958.527] (II) Using input driver 'evdev' for 'Power Button'
[  2958.527] (**) Power Button: always reports core events
[  2958.527] (**) evdev: Power Button: Device: "/dev/input/event1"
[  2958.527] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2958.527] (--) evdev: Power Button: Found keys
[  2958.527] (II) evdev: Power Button: Configuring as keyboard
[  2958.527] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[  2958.527] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  2958.528] (**) Option "xkb_rules" "evdev"
[  2958.528] (**) Option "xkb_model" "evdev"
[  2958.528] (**) Option "xkb_layout" "us"
[  2958.529] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event3)
[  2958.529] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[  2958.529] (II) Using input driver 'evdev' for 'MosArt Optical Mouse'
[  2958.529] (**) MosArt Optical Mouse: always reports core events
[  2958.529] (**) evdev: MosArt Optical Mouse: Device: "/dev/input/event3"
[  2958.529] (--) evdev: MosArt Optical Mouse: Vendor 0x13ee Product 0x3
[  2958.529] (--) evdev: MosArt Optical Mouse: Found 3 mouse buttons
[  2958.529] (--) evdev: MosArt Optical Mouse: Found scroll wheel(s)
[  2958.529] (--) evdev: MosArt Optical Mouse: Found relative axes
[  2958.529] (--) evdev: MosArt Optical Mouse: Found x and y relative axes
[  2958.529] (II) evdev: MosArt Optical Mouse: Configuring as mouse
[  2958.529] (II) evdev: MosArt Optical Mouse: Adding scrollwheel support
[  2958.529] (**) evdev: MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[  2958.529] (**) evdev: MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2958.529] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.2/usb4/4-1/4-1:1.0/input/input3/event3"
[  2958.529] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE, id 8)
[  2958.529] (II) evdev: MosArt Optical Mouse: initialized for relative axes.
[  2958.530] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[  2958.530] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[  2958.530] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[  2958.530] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[  2958.530] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse0)
[  2958.530] (II) No input driver specified, ignoring this device.
[  2958.530] (II) This device may have been added with another device file.
[  2958.531] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  2958.531] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2958.531] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  2958.531] (**) AT Translated Set 2 keyboard: always reports core events
[  2958.531] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  2958.531] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  2958.531] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  2958.531] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  2958.531] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  2958.531] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[  2958.531] (**) Option "xkb_rules" "evdev"
[  2958.531] (**) Option "xkb_model" "evdev"
[  2958.531] (**) Option "xkb_layout" "us"
[  2958.532] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  2958.532] (II) No input driver specified, ignoring this device.
[  2958.532] (II) This device may have been added with another device file.
[  2978.761] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[  2978.761] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2978.761] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[  2978.761] (**) NVIDIA(0):     all display devices.)
[  2978.825] (II) NVIDIA(0): Setting mode "VGA-0: 640x480 @640x480 +0+0 {ViewPortIn=640x480, ViewPortOut=640x480+0+0}"
[  2991.667] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[  2991.667] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2991.668] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[  2991.668] (**) NVIDIA(0):     all display devices.)
[  2996.301] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[  2996.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2996.301] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[  2996.301] (**) NVIDIA(0):     all display devices.)
[  3000.519] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[  3000.519] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  3000.519] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[  3000.519] (**) NVIDIA(0):     all display devices.)
[  3000.635] (II) NVIDIA(0): Setting mode "VGA-0: 800x600 @800x600 +0+0 {ViewPortIn=800x600, ViewPortOut=800x600+0+0}"
[  3004.562] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[  3004.563] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  3004.563] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[  3004.563] (**) NVIDIA(0):     all display devices.)
[  3010.361] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[  3010.361] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  3010.361] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[  3010.361] (**) NVIDIA(0):     all display devices.)
[  3010.471] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1024x768 +0+0

Очень смущает строка 
{ViewPortIn=1024x768, ViewPortOut=1024x768+0+0}"[  3004.562] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1

гуглить пробовал, гугловские советы не помогли. Где я дурак?
монитор viewsonic va903b
nvidia-xconfig пробовал, разрешение падает в 640х480
Содержание
Сообщения в этом обсуждении
"nvidia 8400 + 19' LCD"
Отправлено sTALK_specTrum , 23-Фев-13 05:40 
EDID не читается... Теперь попытаться вместо CRT-1 использовать DFP-0. Просмотреть xorg.conf. Если есть на мониторе дырка DVI, переключиться на неё. Возможны другие варианты.
"nvidia 8400 + 19' LCD"
Отправлено Wagner , 23-Фев-13 08:37 
> EDID не читается... Теперь попытаться вместо CRT-1 использовать DFP-0. Просмотреть xorg.conf.
> Если есть на мониторе дырка DVI, переключиться на неё. Возможны другие
> варианты.

только вга. Приколд в том, что монитор почему-то определяется как CRT. По гуглу понял что с нвидиа под линуксами частая проблема

"nvidia 8400 + 19' LCD"
Отправлено foxy_ant , 23-Фев-13 11:15 
>> EDID не читается... Теперь попытаться вместо CRT-1 использовать DFP-0. Просмотреть xorg.conf.
>> Если есть на мониторе дырка DVI, переключиться на неё. Возможны другие
>> варианты.
> только вга. Приколд в том, что монитор почему-то определяется как CRT. По
> гуглу понял что с нвидиа под линуксами частая проблема

Монитор определяется как CRT потому что драйвер nvidia не может получить данные монитора по EDID. В вашем случае можно отключить использование EDID, тогда X-сервер будет устанавливать значения записанные в xorg.conf, для этого в секции "Screen" надо записать

Option "UseEdidDpi" "FALSE"

Кроме этого в лог-файле упоминается установка разрешения DPI 75 по-умолчанию, в xorg.conf в секции "Screen" сразу надо указать нужное разрешение, иначе будет мелкий шрифт и больше элементы раб.стола:

Option "DPI" "96x96"

Для нужного разрешения надо расчитать Modeline и записать ее в xorg.conf. Для этого есть улитита gtf. Для максимального возможного разрешения вашего монитора (2480х1024) Modeline расчитывается так:

gtf 2480 1024 60

где 60 - частота "кадров" стандартная для старых ЖК-мониторов. Утилита вернет примерно следующее:

# 2480x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 210.64 MHz
  Modeline "2480x1024_60.00"  210.64  2480 2632 2896 3312  1024 1025 1028 1060  -HSync +Vsync (не копируйте мои данные у вас могут оказаться другие значения)

Полученную Modeline надо записать в секцию "Monitor" файла xorg.conf. В секции "Screen" в подсекции "Display" запишите расчитанную моду:

Modes "2480x1024_60.00"

Если разрешение неподойдет, пересчитате gtf по нужным значениям и запишите в xorg.conf.
Удачи.

"nvidia 8400 + 19' LCD"
Отправлено Wagner , 23-Фев-13 19:42 
# cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 313.18  (buildmeister@swio-display-x86-rhel47-11)  Wed Jan  9 16:22:33 PST 2013
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection
Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
    Modeline       "2480x1024_60.00"  210.64  2480 2632 2896 3312  1024 1025 1028 1060  -HSync +Vsync
EndSection
Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option "UseEdidDpi" "FALSE"
    Option "DPI" "96x96"
    SubSection     "Display"
        Depth       24
        Modes      "2480x1024_60.00"
    EndSubSection
# cat /var/log/Xorg.0.log
[  1906.650] 
X.Org X Server 1.13.2
Release Date: 2013-01-24
[  1906.650] X Protocol Version 11, Revision 0
[  1906.650] Build Operating System: Linux 3.7.4-1-ARCH x86_64 
[  1906.650] Current Operating System: Linux workstation 3.7.5-1-ARCH #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013 x86_64
[  1906.650] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bf3c4f6a-7916-46c3-b45e-5d0bb57e2515 ro quiet
[  1906.650] Build Date: 25 January 2013  09:33:50AM
[  1906.650]  
[  1906.650] Current version of pixman: 0.28.2
[  1906.650]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  1906.650] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1906.650] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 23 23:38:13 2013
[  1906.651] (==) Using config file: "/etc/X11/xorg.conf"
[  1906.651] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1906.651] (==) ServerLayout "Layout0"
[  1906.651] (**) |-->Screen "Screen0" (0)
[  1906.651] (**) |   |-->Monitor "Monitor0"
[  1906.652] (**) |   |-->Device "Device0"
[  1906.652] (**) |-->Input Device "Keyboard0"
[  1906.652] (**) |-->Input Device "Mouse0"
[  1906.652] (==) Automatically adding devices
[  1906.652] (==) Automatically enabling devices
[  1906.652] (==) Automatically adding GPU devices
[  1906.652] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1906.652]     Entry deleted from font path.
[  1906.652] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1906.652]     Entry deleted from font path.
[  1906.652] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1906.652]     Entry deleted from font path.
[  1906.652]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1906.652] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1906.652]     Entry deleted from font path.
[  1906.652]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1906.652] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
[  1906.652] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1906.652] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  1906.652] (WW) Disabling Keyboard0
[  1906.652] (WW) Disabling Mouse0
[  1906.652] (II) Loader magic: 0x7fcc40
[  1906.652] (II) Module ABI versions:
[  1906.652]     X.Org ANSI C Emulation: 0.4
[  1906.652]     X.Org Video Driver: 13.1
[  1906.652]     X.Org XInput driver : 18.0
[  1906.652]     X.Org Server Extension : 7.0
[  1906.655] (--) PCI:*(0:1:0:0) 10de:0422:1462:0740 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000e800/128, BIOS @ 0x????????/131072
[  1906.656] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1906.656] Initializing built-in extension Generic Event Extension
[  1906.656] Initializing built-in extension SHAPE
[  1906.656] Initializing built-in extension MIT-SHM
[  1906.656] Initializing built-in extension XInputExtension
[  1906.656] Initializing built-in extension XTEST
[  1906.656] Initializing built-in extension BIG-REQUESTS
[  1906.656] Initializing built-in extension SYNC
[  1906.656] Initializing built-in extension XKEYBOARD
[  1906.656] Initializing built-in extension XC-MISC
[  1906.656] Initializing built-in extension SECURITY
[  1906.656] Initializing built-in extension XINERAMA
[  1906.656] Initializing built-in extension XFIXES
[  1906.656] Initializing built-in extension RENDER
[  1906.656] Initializing built-in extension RANDR
[  1906.656] Initializing built-in extension COMPOSITE
[  1906.656] Initializing built-in extension DAMAGE
[  1906.656] Initializing built-in extension MIT-SCREEN-SAVER
[  1906.656] Initializing built-in extension DOUBLE-BUFFER
[  1906.656] Initializing built-in extension RECORD
[  1906.656] Initializing built-in extension DPMS
[  1906.657] Initializing built-in extension X-Resource
[  1906.657] Initializing built-in extension XVideo
[  1906.657] Initializing built-in extension XVideo-MotionCompensation
[  1906.657] Initializing built-in extension XFree86-VidModeExtension
[  1906.657] Initializing built-in extension XFree86-DGA
[  1906.657] Initializing built-in extension XFree86-DRI
[  1906.657] Initializing built-in extension DRI2
[  1906.657] (II) LoadModule: "glx"
[  1906.657] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1906.697] (II) Module glx: vendor="NVIDIA Corporation"
[  1906.697]     compiled for 4.0.2, module version = 1.0.0
[  1906.697]     Module class: X.Org Server Extension
[  1906.697] (II) NVIDIA GLX Module  313.18  Wed Jan  9 15:34:35 PST 2013
[  1906.697] Loading extension GLX
[  1906.697] (II) LoadModule: "nvidia"
[  1906.697] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1906.698] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1906.699]     compiled for 4.0.2, module version = 1.0.0
[  1906.699]     Module class: X.Org Video Driver
[  1906.699] (II) NVIDIA dlloader X Driver  313.18  Wed Jan  9 15:15:26 PST 2013
[  1906.699] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1906.699] (++) using VT number 7
[  1906.699] (II) Loading sub module "wfb"
[  1906.699] (II) LoadModule: "wfb"
[  1906.699] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1906.700] (II) Module wfb: vendor="X.Org Foundation"
[  1906.700]     compiled for 1.13.2, module version = 1.0.0
[  1906.700]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1906.700] (II) Loading sub module "ramdac"
[  1906.700] (II) LoadModule: "ramdac"
[  1906.700] (II) Module "ramdac" already built-in
[  1906.700] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  1906.700] (==) NVIDIA(0): RGB weight 888
[  1906.700] (==) NVIDIA(0): Default visual is TrueColor
[  1906.700] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1906.700] (**) NVIDIA(0): Option "UseEdidDpi" "FALSE"
[  1906.701] (**) NVIDIA(0): Option "DPI" "96x96"
[  1906.701] (**) NVIDIA(0): Enabling 2D acceleration
[  1907.193] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[  1907.195] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G86) at PCI:1:0:0 (GPU-0)
[  1907.195] (--) NVIDIA(0): Memory: 524288 kBytes
[  1907.195] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.90
[  1907.195] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  1907.199] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
[  1907.199] (--) NVIDIA(0):     CRT-0
[  1907.199] (--) NVIDIA(0):     CRT-1 (connected)
[  1907.199] (--) NVIDIA(0):     TV-0
[  1907.200] (--) NVIDIA(0):     DFP-0
[  1907.200] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[  1907.200] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[  1907.200] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[  1907.200] (--) NVIDIA(0): DFP-0: 165.0 MHz maximum pixel clock
[  1907.200] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[  1907.200] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1907.200] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[  1907.200] (**) NVIDIA(0):     all display devices.)
[  1907.201] (WW) NVIDIA(0): No valid modes for "CRT-1:2480x1024_60.00"; removing.
[  1907.201] (WW) NVIDIA(0): 
[  1907.201] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[  1907.201] (WW) NVIDIA(0):     "nvidia-auto-select".
[  1907.201] (WW) NVIDIA(0): 
[  1907.201] (II) NVIDIA(0): Validated MetaModes:
[  1907.201] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[  1907.201] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[  1907.229] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[  1907.229] (--) Depth 24 pixmap format is 32 bpp
[  1907.229] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[  1907.233] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1907.233] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1907.233] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1907.233] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1907.233] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1907.233] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1907.233] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1907.234] (II) NVIDIA(0):     Config Options in the README.
[  1907.238] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[  1907.262] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[  1907.263] Loading extension NV-GLX
[  1907.287] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1907.287] (==) NVIDIA(0): Backing store disabled
[  1907.287] (==) NVIDIA(0): Silken mouse enabled
[  1907.288] (**) NVIDIA(0): DPMS enabled
[  1907.288] Loading extension NV-CONTROL
[  1907.288] Loading extension XINERAMA
[  1907.288] (II) Loading sub module "dri2"
[  1907.288] (II) LoadModule: "dri2"
[  1907.288] (II) Module "dri2" already built-in
[  1907.288] (II) NVIDIA(0): [DRI2] Setup complete
[  1907.289] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1907.289] (--) RandR disabled
[  1907.299] (II) Initializing extension GLX
[  1907.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1907.376] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1907.376] (II) LoadModule: "evdev"
[  1907.377] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1907.377] (II) Module evdev: vendor="X.Org Foundation"
[  1907.377]     compiled for 1.13.0, module version = 2.7.3
[  1907.377]     Module class: X.Org XInput Driver
[  1907.377]     ABI class: X.Org XInput driver, version 18.0
[  1907.377] (II) Using input driver 'evdev' for 'Power Button'
[  1907.377] (**) Power Button: always reports core events
[  1907.377] (**) evdev: Power Button: Device: "/dev/input/event2"
[  1907.377] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1907.377] (--) evdev: Power Button: Found keys
[  1907.377] (II) evdev: Power Button: Configuring as keyboard
[  1907.377] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  1907.377] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1907.377] (**) Option "xkb_rules" "evdev"
[  1907.377] (**) Option "xkb_model" "evdev"
[  1907.377] (**) Option "xkb_layout" "us"
[  1907.435] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  1907.435] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1907.435] (II) Using input driver 'evdev' for 'Power Button'
[  1907.435] (**) Power Button: always reports core events
[  1907.435] (**) evdev: Power Button: Device: "/dev/input/event1"
[  1907.435] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1907.435] (--) evdev: Power Button: Found keys
[  1907.435] (II) evdev: Power Button: Configuring as keyboard
[  1907.435] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[  1907.435] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  1907.435] (**) Option "xkb_rules" "evdev"
[  1907.436] (**) Option "xkb_model" "evdev"
[  1907.436] (**) Option "xkb_layout" "us"
[  1907.437] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event4)
[  1907.437] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[  1907.437] (II) Using input driver 'evdev' for 'MosArt Optical Mouse'
[  1907.437] (**) MosArt Optical Mouse: always reports core events
[  1907.437] (**) evdev: MosArt Optical Mouse: Device: "/dev/input/event4"
[  1907.437] (--) evdev: MosArt Optical Mouse: Vendor 0x13ee Product 0x3
[  1907.437] (--) evdev: MosArt Optical Mouse: Found 3 mouse buttons
[  1907.437] (--) evdev: MosArt Optical Mouse: Found scroll wheel(s)
[  1907.437] (--) evdev: MosArt Optical Mouse: Found relative axes
[  1907.437] (--) evdev: MosArt Optical Mouse: Found x and y relative axes
[  1907.437] (II) evdev: MosArt Optical Mouse: Configuring as mouse
[  1907.437] (II) evdev: MosArt Optical Mouse: Adding scrollwheel support
[  1907.437] (**) evdev: MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[  1907.437] (**) evdev: MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1907.437] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.2/usb4/4-1/4-1:1.0/input/input4/event4"
[  1907.437] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE, id 8)
[  1907.437] (II) evdev: MosArt Optical Mouse: initialized for relative axes.
[  1907.438] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[  1907.438] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[  1907.438] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[  1907.438] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[  1907.438] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse0)
[  1907.438] (II) No input driver specified, ignoring this device.
[  1907.438] (II) This device may have been added with another device file.
[  1907.439] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1907.439] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1907.439] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1907.439] (**) AT Translated Set 2 keyboard: always reports core events
[  1907.439] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1907.439] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1907.439] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1907.439] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1907.439] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1907.439] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[  1907.439] (**) Option "xkb_rules" "evdev"
[  1907.439] (**) Option "xkb_model" "evdev"
[  1907.439] (**) Option "xkb_layout" "us"
[  1907.440] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[  1907.440] (II) No input driver specified, ignoring this device.
[  1907.440] (II) This device may have been added with another device file.
EndSection

вот такое имеем. 640х480 только
"nvidia 8400 + 19' LCD"
Отправлено foxy_ant , 23-Фев-13 22:37 
>[оверквотинг удален]
> [  1907.201] (WW) NVIDIA(0):
> [  1907.201] (WW) NVIDIA(0): Unable to validate any modes; falling back
> to the default mode
> [  1907.201] (WW) NVIDIA(0):     "nvidia-auto-select".
> [  1907.201] (WW) NVIDIA(0):
> [  1907.201] (II) NVIDIA(0): Validated MetaModes:
> [  1907.201] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
> [  1907.201] (II) NVIDIA(0): Virtual screen size determined to be 640
> x 480
> вот такое имеем. 640х480 только

2480x1024 - No valid modes, такое разрешение неподходит, лучше уменьшить значения, пересчитать modeline и записать расчитанное в xorg.conf. Отпишитесь потом что получилось.

"nvidia 8400 + 19' LCD"
Отправлено Wagner , 23-Фев-13 23:33 
>[оверквотинг удален]
>> to the default mode
>> [  1907.201] (WW) NVIDIA(0):     "nvidia-auto-select".
>> [  1907.201] (WW) NVIDIA(0):
>> [  1907.201] (II) NVIDIA(0): Validated MetaModes:
>> [  1907.201] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
>> [  1907.201] (II) NVIDIA(0): Virtual screen size determined to be 640
>> x 480
>> вот такое имеем. 640х480 только
> 2480x1024 - No valid modes, такое разрешение неподходит, лучше уменьшить значения, пересчитать
> modeline и записать расчитанное в xorg.conf. Отпишитесь потом что получилось.

последняя проблема была в неправильных     Horizsync и Vertrefresh. Рабочие параметры таковы:


    Horizsync 30-82
    Vertrefresh 50-85

"nvidia 8400 + 19' LCD"
Отправлено Роман , 24-Фев-13 03:13 
1280 x 1024 @ 60Hz

то которое вы написали конечно не существует.

"nvidia 8400 + 19' LCD"
Отправлено Wagner , 24-Фев-13 08:43 
> 1280 x 1024 @ 60Hz
> то которое вы написали конечно не существует.

оно на 75гц работает да

"nvidia 8400 + 19' LCD"
Отправлено Wagner , 24-Фев-13 11:11 
заметил неинтересную вещь: при начале проигрывания видео монитор мигает. При заканчивании тоже один раз мигает. Мне кажется что происходит какое-то переключение режимов. Если так и есть - каким образом это можно побороть?
"nvidia 8400 + 19' LCD"
Отправлено pavlinux , 25-Фев-13 04:57 
> заметил неинтересную вещь: при начале проигрывания видео монитор мигает. При заканчивании
> тоже один раз мигает. Мне кажется что происходит какое-то переключение режимов.
> Если так и есть - каким образом это можно побороть?

А где ты нарыл такой СТАРЫЙ, прибор, 2480х1024 ?
Это ж, пля, прямоугольник, у которого длина больше высоты почти в 2.5 раза!!!
Вот у меня 2560 x 1024, но это два 19" монитора по 1280x1024, почти метр в длину.

"nvidia 8400 + 19' LCD"
Отправлено Wagner , 25-Фев-13 08:14 
>> заметил неинтересную вещь: при начале проигрывания видео монитор мигает. При заканчивании
>> тоже один раз мигает. Мне кажется что происходит какое-то переключение режимов.
>> Если так и есть - каким образом это можно побороть?
> А где ты нарыл такой СТАРЫЙ, прибор, 2480х1024 ?
> Это ж, пля, прямоугольник, у которого длина больше высоты почти в 2.5
> раза!!!
> Вот у меня 2560 x 1024, но это два 19" монитора по
> 1280x1024, почти метр в длину.

это, как ни странно, вполне себе квадрат :)