Есть 7206, там раньше стоял модуль флэш 16Мб, потом этот модуль побывал в 5509 и в 3640, туда что-то успешно записывалось и с него успешно бутилось оборудование. Потом его вернули назад в 7206, разумеется IOS от 72хх на нем не осталось и при загрузке циска вываливается в
7206(boot)#
при попытке
7206(boot)#sh flash
Open device slot0 failed (bad device info block)
7206(boot)#dir flash
Open device slot0 failed (bad device info block)
7206(boot)#dir slot0
Open device slot0 failed (bad device info block)
7206(boot)#erase flash
Command not supported
7206(boot)#squeeze flash:
All deleted files will be removed, proceed? [confirm]
Squeeze operation may take a while, proceed? [confirm]
Squeeze device flash failed (bad device info block)
7206(boot)#
Что бы это значило? Кто-то вытащил флеш на горячую и она посыпалась?
7206(boot)#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-BOOT-M), Version 11.2(8), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Tue 05-Aug-97 05:52 by ckralik
Image text-base: 0x600088A0, data-base: 0x602A2000

ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE (fc1)

7206 uptime is 13 minutes
System restarted by power-on
System image file is "bootflash:c7200-boot-mz.112-8", booted via bootflash

cisco 7206 (NPE150) processor with 26624K/6144K bytes of memory.
R4700 processor, Implementation 33, Revision 1.0 (Level 2 Cache)
Last reset from power-on
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
125K bytes of non-volatile configuration memory.
1024K bytes of packet SRAM memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x102

еще тоже интересно: при загрузке выдала(ни одного интерфейса сейчас не подсоединено)
7206(boot)#sh log
Log Buffer (8192 bytes):

%PA-2-UNDEFPA: Undefined Port Adaptor type 9 in bay 1
%PA-2-UNDEFPA: Undefined Port Adaptor type 255 in bay 2
%PA-2-UNDEFPA: Undefined Port Adaptor type 6 in bay 3
%PA-2-UNDEFPA: Undefined Port Adaptor type 13 in bay 4
%LINK-4-NOMAC: A random default MAC address of 0000.0c8f.2f2d has
  been chosen.  Ensure that this address is unique, or specify MAC
  addresses for commands (such as 'novell routing') that allow the
  use of this address as a default.
00:00:15: %SYS-5-CONFIG_I: Configured from memory by console
00:00:15: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-BOOT-M), Version 11.2(8), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Tue 05-Aug-97 05:52 by ckralik
00:00:15: %OIR-3-SEATED: Insert/removal failed (slot 1), check card seating
00:00:15: %OIR-3-SEATED: Insert/removal failed (slot 2), check card seating
00:00:15: %OIR-3-SEATED: Insert/removal failed (slot 3), check card seating
00:00:15: %OIR-3-SEATED: Insert/removal failed (slot 4), check card seating
00:00:15: %OIR-3-SEATED: Insert/removal failed (slot 1), check card seating
00:00:15: %OIR-3-SEATED: Insert/removal failed (slot 2), check card seating
00:00:15: %OIR-3-SEATED: Insert/removal failed (slot 3), check card seating
00:00:15: %OIR-3-SEATED: Insert/removal failed (slot 4), check card seating

• Open device slot0 failed (bad device info block),sh_, 12:28 , 09-Мрт-06
  • Open device slot0 failed (bad device info block),Сайко, 12:41 , 09-Мрт-06
    • Open device slot0 failed (bad device info block),tyomikh, 12:55 , 09-Мрт-06
      • Open device slot0 failed (bad device info block),ilya, 13:47 , 09-Мрт-06
      • Open device slot0 failed (bad device info block),Сайко, 14:16 , 09-Мрт-06
        • Open device slot0 failed (bad device info block),tyomikh, 14:18 , 09-Мрт-06
• Open device slot0 failed (bad device info block),tyomikh, 14:17 , 09-Мрт-06

format ?

>format ?
+ еще предварительно sh file syst

>>format ?
>+ еще предварительно sh file syst
7206(boot)#format slot0:
помогло, спасибо!

7206(boot)#sh file syst
File slot0:syst can not be opened (file not found)

>>>format ?
>>+ еще предварительно sh file syst
>7206(boot)#format slot0:
>помогло, спасибо!
>
>7206(boot)#sh file syst
>File slot0:syst can not be opened (file not found)

если речь про PCMCI карты то у них разный тип файловой системы на разныж железказ (ТИП А, Б или I II не помню точно)
поэтому такие несовместимости могут возникать.

>7206(boot)#sh file syst
>File slot0:syst can not be opened (file not found)
И что нет такой команды?
show file systems

>>7206(boot)#sh file syst
>>File slot0:syst can not be opened (file not found)
>И что нет такой команды?
>show file systems

возможно, в режиме (boot) нету
7206(boot)#show file systems
File slot0:systems can not be opened (file not found)

ПАСИБА ВСЕМ ЗА ПОМОЩЬ
теперь надо разобраться какой иос туда залить
строка из sh ver
cisco 7206 (NPE150) processor with 26624K/6144K bytes of memory
означает, что там всего лишь 32Mb?!?!?!
почти во всех иосах требуется вроде 128....