URL: https://www.opennet.me/cgi-bin/openforum/vsluhboard.cgi
Форум: vsluhforumID6
Нить номер: 11121
[ Назад ]
Исходное сообщение
"СРОЧНО: Командная строка Catalyst 7604+Supervisor Engine 32"
Отправлено ielm , 27-Июл-06 11:52 
Добрый день!
-----------------------------
Press RETURN to get started!


00:01:16: RP: Currently running ROMMON from S (Gold) region
00:01:30: %SYS-6-CLOCKUPDATE: System clock has been updated from 06:58:06 UTC Th
u Jul 27 2006 to 23:58:06 PDT Wed Jul 26 2006, configured from console by consol
e.
00:01:30: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:30: %SYS-5-CONFIG_I: Configured from memory by console
00:01:32: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s3223_rp Software (s3223_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 23-Mar-06 18:22 by tinhuang
00:01:32: %MFIB_CONST_RP-6-REPLICATION_MODE_CHANGE: Replication Mode Change Dete
cted. Current system replication mode is Ingress
00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure consol
e debugging output.

00:00:06: %OIR-SP-6-CONSOLE: Changing console ownership to route processor

00:00:06: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure con
sole debugging output.


Firmware compiled 06-Mar-06 22:47 by integ Build [100]


00:01:26: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:31: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s3223_sp Software (s3223_sp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 23-Mar-06 18:21 by tinhuang
00:01:31: SP: Currently running ROMMON from S (Gold) region
00:01:34: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:34: фKPWR-SP-4-PSOK: power supply 1 turned on.
00:01:34: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:34: фKPWR-SP-4-PSOK: power supply 2 turned on.
00:01:34: фKPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system i
s operating on both power supplies.
00:01:38: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics...
00:01:50: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
00:01:51: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online
----------------------------------------------------------------
Здесь зверь зависает навсегда. Если нажимать Ввод (Enter) сразу после

Press RETURN to get started!

- ничего не происходит. Пользуюсь HyperTerminal ver.6.3. Параметры порта 9600,8,n,2,n.

Подскажите, плиз, как зайти в командную строку сабжа? Аппарат новый.

Содержание
Сообщения в этом обсуждении
"СРОЧНО: Командная строка Catalyst 7604+Supervisor Engine 32"
Отправлено WizART , 27-Июл-06 11:55 
Вроде у циски всегда 9600,8,n,1,n было...
"СРОЧНО: Командная строка Catalyst 7604+Supervisor Engine 32"
Отправлено ielm , 27-Июл-06 12:10 
>Вроде у циски всегда 9600,8,n,1,n было...


--------
Check the terminal documentation to determine the baud rate. The baud rate of the terminal must match the default baud rate (9600 baud) of the console port. Set up the terminal as follows:

•9600 baud

•8 data bits

•No parity

•2 stop bits
---------
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600...

Эта дока говорит - 2 стоповых бита для 7600.
Попробовал - 1 бит - не помогает.

"СРОЧНО: Командная строка Catalyst 7604+Supervisor Engine 32"
Отправлено WizART , 27-Июл-06 12:28 
Проверь COM-порт на компе и шнурок на заведомо исправном оборудовании...
"СРОЧНО: Командная строка Catalyst 7604+Supervisor Engine 32"
Отправлено ielm , 27-Июл-06 14:04 
>Проверь COM-порт на компе и шнурок на заведомо исправном оборудовании...

Точно. COM-порт накрылся. Спасибо за совет.