Собрал стенд, настроил ОСПФ и QoS
соединил через Е1 и мультилинк

controller E1 1/0
framing NO-CRC4
channel-group 0 timeslots 1-2

interface Multilink1
ip address 192.168.12.2 255.255.255.0
ip access-group 140 out
ip accounting output-packets
max-reserved-bandwidth 100
ip route-cache flow
no ip mroute-cache
load-interval 30
ppp multilink
ppp multilink fragment-delay 10
ppp multilink interleave
multilink-group 1

interface Serial1/0:0
description TEST ID_Kegoc
bandwidth 2048
no ip address
max-reserved-bandwidth 100
encapsulation ppp
load-interval 30
ppp multilink
multilink-group 1
!
router ospf 11
log-adjacency-changes
network 192.168.1.220 0.0.0.3 area 0
network 192.168.4.0 0.0.0.255 area 11
network 192.168.12.0 0.0.0.3 area 0

начинаю полностью нагружать канал
выдает следующее:

MGTS#Trying to release a buff out of range 0x7D47834

*Mar  1 06:11:28: Copland ERROR->Slot(1):Rx wrong slot 0 my slot is 1

*Mar  1 06:11:52: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=3030, count=0
-Traceback= 603B2920 60EEDB94 60EE5B88 60EE5FD4 60EE0FCC
*Mar  1 06:11:57: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=3030, count=0
-Traceback= 603B2920 60EEDB94 60EE5B88 60EE5FD4 60EE0FCC
MGTS#
MGTS#
*Mar  1 06:12:01: Copland ERROR->Slot(1):Rx wrong slot 114 my slot is 1

*Mar  1 06:12:02: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x60EEDA88 reading 0x30A0
*Mar  1 06:12:02: %ALIGN-3-TRACE: -Traceback= 60EEDA88 60EE5B88 60EE5FD4 60EE0FCC 00000000 00000000 00000000 00000000
*Mar  1 06:12:02: %ALIGN-3-TRACE: -Traceback= 60EEDB50 60EE5B88 60EE5FD4 60EE0FCC 00000000 00000000 00000000 00000000
*Mar  1 06:12:02: %ALIGN-3-TRACE: -Traceback= 603B21F0 60EEDB94 60EE5B88 60EE5FD4 60EE0FCC 00000000 00000000 00000000
*Mar  1 06:12:02: %ALIGN-3-TRACE: -Traceback= 603B2944 60EEDB94 60EE5B88 60EE5FD4 60EE0FCC 00000000 00000000 00000000

а затем перегружаеться роутер...

эти логи говорят о проблемах с железом или дело в настроиках?

• перезагружается роутер 3640,ks, 13:30 , 15-Авг-06
  • перезагружается роутер 3640,AL_N, 13:38 , 15-Авг-06

>*Mar  1 06:12:02: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x60EEDA88 reading
>0x30A0

>а затем перегружаеться роутер...

A spurious access occurs when a process attempts to read from the lowest 16 KB region of memory. This portion of memory is reserved and should never be accessed. A read operation to this region of memory is usually caused when a nonexisting value is returned to a function in the software, or in other words, when a null pointer is passed to a function.

Spurious access errors are always caused by a Cisco IOS software bug. To correct this, upgrade to the latest version in your release train (for example, if you are running Cisco IOS Software Release 11.2(14), upgrade to the latest 11.2(x) image. If this doesn't solve the problem, or if it's not possible to upgrade the router, contact the Cisco TAC.

>>*Mar  1 06:12:02: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x60EEDA88 reading
>>0x30A0
>
>>а затем перегружаеться роутер...
>
>A spurious access occurs when a process attempts to read from the
>lowest 16 KB region of memory. This portion of memory is
>reserved and should never be accessed. A read operation to this
>region of memory is usually caused when a nonexisting value is
>returned to a function in the software, or in other words,
>when a null pointer is passed to a function.
>
>
>Spurious access errors are always caused by a Cisco IOS software bug.
>To correct this, upgrade to the latest version in your release
>train (for example, if you are running Cisco IOS Software Release
>11.2(14), upgrade to the latest 11.2(x) image. If this doesn't solve
>the problem, or if it's not possible to upgrade the router,
>contact the Cisco TAC.

иос то по новее будет

MGTS#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-IS-M), Version 12.2(16), RELEASE SOFTWARE (fc3)