Здравствуйте, подскажите, где взять IOS для маршрутизатора 2610 (см.ниже) с поддержкой dot1qCisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.1(7), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Thu 22-Feb-01 12:50 by kellythw
Image text-base: 0x80008088, data-base: 0x808023C4ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Internet_Stroitel uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.121-7.bin"cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memory.
Processor board ID JAD034930DK (2103042866)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)Configuration register is 0x2102
Не получится. Памяти очень мало. Нужно минимум 16 флэш и 48 dram.
>Не получится. Памяти очень мало. Нужно минимум 16 флэш и 48 dram.
>
есть все
http://www.filesearch.ru/cgi-bin/s?q=c2600&t=f&d=&x=0&y=0
>Здравствуйте, подскажите, где взять IOS для маршрутизатора 2610 (см.ниже) с поддержкой dot1q
>
>
>Cisco Internetwork Operating System Software
>IOS (tm) C2600 Software (C2600-I-M), Version 12.1(7), RELEASE SOFTWARE (fc1)
>Copyright (c) 1986-2001 by cisco Systems, Inc.
>Compiled Thu 22-Feb-01 12:50 by kellythw
>Image text-base: 0x80008088, data-base: 0x808023C4
>
>ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
>Internet_Stroitel uptime is 4 minutes
>System returned to ROM by power-on
>System image file is "flash:c2600-i-mz.121-7.bin"
>
>cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memory.
>Processor board ID JAD034930DK (2103042866)
>M860 processor: part number 0, mask 49
>Bridging software.
>X.25 software, Version 3.0.0.
>1 Ethernet/IEEE 802.3 interface(s)
>32K bytes of non-volatile configuration memory.
>8192K bytes of processor board System flash (Read/Write)
>
>Configuration register is 0x2102
>
ftp://cisco:ios@195.140.140.170/2600/c2600-d-mz.122-29a...
>>Здравствуйте, подскажите, где взять IOS для маршрутизатора 2610 (см.ниже) с поддержкой dot1q
>>
>>
>>Cisco Internetwork Operating System Software
>>IOS (tm) C2600 Software (C2600-I-M), Version 12.1(7), RELEASE SOFTWARE (fc1)
>>Copyright (c) 1986-2001 by cisco Systems, Inc.
>>Compiled Thu 22-Feb-01 12:50 by kellythw
>>Image text-base: 0x80008088, data-base: 0x808023C4
>>
>>ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>>
>>Internet_Stroitel uptime is 4 minutes
>>System returned to ROM by power-on
>>System image file is "flash:c2600-i-mz.121-7.bin"
>>
>>cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memory.
>>Processor board ID JAD034930DK (2103042866)
>>M860 processor: part number 0, mask 49
>>Bridging software.
>>X.25 software, Version 3.0.0.
>>1 Ethernet/IEEE 802.3 interface(s)
>>32K bytes of non-volatile configuration memory.
>>8192K bytes of processor board System flash (Read/Write)
>>
>>Configuration register is 0x2102
>>
>ftp://cisco:ios@195.140.140.170/2600/c2600-d-mz.122-29a...
А на 7140 не поможите с ios 12.4 , уж очень хочется ip flow egress
>А на 7140 не поможите с ios 12.4 , уж очень хочется
>ip flow egress
А нету такой. Та, что на фтп лежит, - последняя версия для 7100-серии.
Не подскажет уважаемый АЛЛ. Где взять ИОС для 2611 с поддержкой ДШЦП на интерфейсе. Версия 12.3 подойдет:)