URL: https://www.opennet.me/cgi-bin/openforum/vsluhboard.cgi
Форум: vsluhforumID6
Нить номер: 12629
[ Назад ]

Исходное сообщение
"Cisco 2620 & NM2FE or NM2E"
Отправлено Dmitriy Sirant , 30-Янв-07 17:33

Немогу поднять NM2FE или NM2E на 2620. Карты рабочие, в 3600 серии работают.
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-D-M), Version 12.2(29a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 12-Aug-05 21:12 by tinhuang
Image text-base: 0x8000808C, data-base: 0x80B5E5A4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:c2600-d-mz.122-29a.bin"
cisco 2620 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of memory.
Processor board ID JAB0407058N (2113115807)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x3922
Router#sh diag
Slot 0:
        C2620 1FE Mainboard Port adapter, 1 port
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 1.2
        PCB Serial Number        : JAB0407058N (2113115807)
        Part Number              : 73-2843-07
        RMA History              : 00
        RMA Number               : 0-0-0-0
        Board Revision           : A0
        Deviation Number         : 0-21510
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 00 94 41 01 02 C1 18 4A 41 42 30 34 30
          0x10: 37 30 35 38 4E 20 28 32 31 31 33 31 31 35 38 30
          0x20: 37 29 82 49 0B 1B 07 04 00 81 00 00 00 00 42 41
          0x30: 30 80 00 00 54 06 FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Slot 1:
        Unknown (type 30) Port adapter
        Port adapter is disabled
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware revision 1.2           Board revision E0
        Serial number     24293470      Part number    800-01171-05
        FRU Part Number:  NM-2E2W=
        Test history      0x0           RMA number     00-00-00
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 1E 01 02 01 72 B0 5E 50 04 93 05 00 00 00 00
          0x30: 70 00 00 00 01 02 08 17 FF FF FF FF FF FF FF FF
Подскажите что делать...

Содержание

Cisco 2620 & NM2FE or NM2E,fantom, 18:14 , 30-Янв-07
- Cisco 2620 & NM2FE or NM2E,Dmitriy Sirant, 18:21 , 30-Янв-07

Сообщения в этом обсуждении

"Cisco 2620 & NM2FE or NM2E"
Отправлено fantom , 30-Янв-07 18:14

>Немогу поднять NM2FE или NM2E на 2620. Карты рабочие, в 3600 серии
>работают.
>
>Router#sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) C2600 Software (C2600-D-M), Version 12.2(29a), RELEASE SOFTWARE (fc1)
>Copyright (c) 1986-2005 by cisco Systems, Inc.
>Compiled Fri 12-Aug-05 21:12 by tinhuang
>Image text-base: 0x8000808C, data-base: 0x80B5E5A4
>
>ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
>Router uptime is 3 minutes
>System returned to ROM by power-on
>System image file is "flash:c2600-d-mz.122-29a.bin"
>
>cisco 2620 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of memory.
>Processor board ID JAB0407058N (2113115807)
>M860 processor: part number 0, mask 49
>Bridging software.
>X.25 software, Version 3.0.0.
>1 FastEthernet/IEEE 802.3 interface(s)
>32K bytes of non-volatile configuration memory.
>16384K bytes of processor board System flash (Read/Write)
>
>Configuration register is 0x3922
>
>Router#sh diag
>Slot 0:
>        C2620 1FE Mainboard Port
>adapter, 1 port
>        Port adapter is analyzed
>
>        Port adapter insertion time
>unknown
>        EEPROM contents at hardware
>discovery:
>        Hardware Revision
>     : 1.2
>        PCB Serial Number
>      : JAB0407058N (2113115807)
>        Part Number
>
>: 73-2843-07
>        RMA History
>
>: 00
>        RMA Number
>
> : 0-0-0-0
>        Board Revision
>        : A0
>        Deviation Number
>      : 0-21510
>        EEPROM format version 4
>
>        EEPROM contents (hex):
>          0x00: 04
>FF 40 00 94 41 01 02 C1 18 4A 41
>42 30 34 30
>          0x10: 37
>30 35 38 4E 20 28 32 31 31 33 31
>31 35 38 30
>          0x20: 37
>29 82 49 0B 1B 07 04 00 81 00 00
>00 00 42 41
>          0x30: 30
>80 00 00 54 06 FF FF FF FF FF FF
>FF FF FF FF
>          0x40: FF
>FF FF FF FF FF FF FF FF FF FF FF
>FF FF FF FF
>          0x50: FF
>FF FF FF FF FF FF FF FF FF FF FF
>FF FF FF FF
>          0x60: FF
>FF FF FF FF FF FF FF FF FF FF FF
>FF FF FF FF
>          0x70: FF
>FF FF FF FF FF FF FF FF FF FF FF
>FF FF FF FF
>
>Slot 1:
>        Unknown (type 30) Port
>adapter
>        Port adapter is disabled
>
>        Port adapter insertion time
>unknown
>        EEPROM contents at hardware
>discovery:
>        Hardware revision 1.2
>         Board revision
>E0
>        Serial number
>  24293470      Part number
>  800-01171-05
>        FRU Part Number:
>NM-2E2W=
>
>        Test history
>   0x0
>   RMA number     00-00-00
>        EEPROM format version 1
>
>        EEPROM contents (hex):
>          0x20: 01
>1E 01 02 01 72 B0 5E 50 04 93 05
>00 00 00 00
>          0x30: 70
>00 00 00 01 02 08 17 FF FF FF FF
>FF FF FF FF
>
>Подскажите что делать...
Помоемому они несовместимы с 2620....
http://www.cisco.com/warp/public/765/tools/quickreference/in...

"Cisco 2620 & NM2FE or NM2E"
Отправлено Dmitriy Sirant , 30-Янв-07 18:21

>
>Помоемому они несовместимы с 2620....
>
>http://www.cisco.com/warp/public/765/tools/quickreference/in...
Да, спасибо. Действительно не поддерживаются :(