URL: https://www.opennet.me/cgi-bin/openforum/vsluhboard.cgi
Форум: vsluhforumID6
Нить номер: 13283
[ Назад ]

Исходное сообщение
"Помогите с настройкой AP1210"

Отправлено Siboy , 09-Апр-07 14:56 
Помогите плз с настройкой точки доступа. Есть конфиг. Не могу понять что еще не хватает.

!

version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname NetService
!

!
clock timezone MSK 3
clock summer-time MSD recurring last Sun Mar 2:00 last Sun Oct 3:00
ip subnet-zero
ip name-server 192.168.10.1
ip dhcp excluded-address 192.168.10.1 192.168.10.2
!
ip dhcp pool ADDRESS_POOL
      network 192.168.10.0 255.255.255.0
!
!
no aaa new-model
!
dot11 ssid TEST
      authentication open
      guest-mode
      infrastructure-ssid
!
!
!

!
bridge irb
!
!
interface Dot11Radio0
  no ip address
  no ip route-cache
  !
  ssid TEST
  !
  speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
  station-role root
  rts threshold 2312
  antenna receive right
  antenna transmit right
  bridge-group 1
  bridge-group 1 subscriber-loop-control
  bridge-group 1 block-unknown-source
  no bridge-group 1 source-learning
  no bridge-group 1 unicast-flooding
  bridge-group 1 spanning-disabled
!
interface FastEthernet0
  no ip address
  no ip route-cache
  duplex auto
  speed auto
  bridge-group 1
  no bridge-group 1 source-learning
  bridge-group 1 spanning-disabled
  hold-queue 160 in
!
interface BVI1
  ip address 192.168.10.2 255.255.255.0
  no ip route-cache
!
ip default-gateway 192.168.10.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
!
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
  login local
line vty 5 15
  login
!
sntp server 212.152.33.1
end

И еще, при просмотре sh ip int br показывает следующее:
Interface IP-Address OK? Method Status Protocol
BVI1 192.168.10.2 YES NVRAM up up
Dot11Radio0 unassigned YES NVRAM reset down
FastEthernet0 unassigned YES NVRAM up up


Содержание

Сообщения в этом обсуждении
"Помогите с настройкой AP1210"
Отправлено Siboy , 09-Апр-07 16:26 
При включении и выключении интерфейса dot11radio выдается следующее:
Apr  9 12:21:12.923: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
Apr  9 12:21:13.224: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firmware file (flash:/5101.img) was found
Apr  9 12:21:13.225: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firmware file (flash:/5101.img) was found
Apr  9 12:21:13.226: %DOT11-2-RESET_RADIO: Interface Dot11Radio0, Radio firmware file not found, Trying hardware reset on radio
Apr  9 12:21:15.220: %SYS-3-CPUHOG: Task is running for (1999)msecs, more than (2000)msecs (1/1),process = Dot11 driver.
-Traceback= 243E44 23FAA8 23B89C 40C0A8 67E810 681550 415898 41CBC0 1359F0
Apr  9 12:21:17.218: %SYS-3-CPUHOG: Task is running for (3998)msecs, more than (2000)msecs (1/1),process = Dot11 driver.
-Traceback= 23FAB8 23B89C 40C0A8 67E810 681550 415898 41CBC0 1359F0
Apr  9 12:21:19.221: %SYS-3-CPUHOG: Task is running for (5997)msecs, more than (2000)msecs (2/1),process = Dot11 driver.
-Traceback= 23FAB0 23B89C 40C0A8 67E810 681550 415898 41CBC0 1359F0
Apr  9 12:21:20.207: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firmware file (flash:/5101.img) was found
Apr  9 12:21:20.208: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firmware file (flash:/5101.img) was found
Apr  9 12:21:20.509: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
Apr  9 12:21:20.509: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available


Версия софта c1200-k9w7-tar.123-8.JEA1.tar