Господа!
5350 при загрузке пишетSystem Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support
Copyright (c) 2001 by cisco Systems, Inc.Warning: monitor nvram area is corrupt ... using default values
environment checksum in NVRAM failed
Warning: NVRAM size is 0
AS5350 platform with 131072 Kbytes of main memoryrommon 1 >
Подскажите, как лечится? ...плиз...
За ранее благодарю
>[оверквотинг удален]
>Warning: monitor nvram area is corrupt ... using default values
>environment checksum in NVRAM failed
>Warning: NVRAM size is 0
>AS5350 platform with 131072 Kbytes of main memory
>
>rommon 1 >
>
>Подскажите, как лечится? ...плиз...
>
>За ранее благодарюRouter#test memory
Test NVRAM card [y/n] ? yThe solution is to issue the write erase command and reload the router. If the issue persists, the hardware needs to be replaced.
Так, она не доходит до Router# ...максимум rommon 1 > :(
>Так, она не доходит до Router# ...максимум rommon 1 > :(что говорит из rommon на команду boot ?
confreg какое значение имеет?
rommon 1 > bootSelf decompressing the image : ################################################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706Cisco Internetwork Operating System Software
IOS (tm) 5400 Software (C5400-BOOT-M), Version 12.1(1)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sat 08-Jul-00 23:43 by beliu
Image text-base: 0x60008910, data-base: 0x60300000Warning: NVRAM size is 0
=== Flushing messages (00:00:00 UTC Tue Nov 30 1999) ===Buffered messages:
Queued messages:
-Traceback= 600FD378 60059378 600593EC 6012A794 6005BE5C 6014ACC0 6014C8C8 600F64E4 600F65A8 6004B630 6004B850 600D62BC 600D62A8
*** System received a Read Bus Error exception ***
Access address = 0xbe080000
signal= 0xa, code= 0x1c, context= 0x6043eb50
PC = 0x601011bc, Cause Reg = 0x1000020, Status Reg = 0x34000002
Interrupt Ctrl Reg = 0x10001082
environment checksum in NVRAM failed
rommon 2 >а какое значение надо поставить?
хм... у тебя тут и BUS ERROR...
confreg 0x2102
проверить память
загрузить другой образ
http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1...
ну а дальше я не спец по таким моментам... если ничего не помогло, я обратился бы в саппорт