Дурацкий вопрос
как залить tar на catalyst 2950?
Только IOS (*.bin) заливал неоднократно, но народ жаждет и html тоже.

• Заливка tar на с2950,lask, 14:04 , 07-Июл-08
  • Заливка tar на с2950,fantom, 15:25 , 07-Июл-08
    • Заливка tar на с2950,sh_, 15:33 , 07-Июл-08
      • Заливка tar на с2950,fantom, 20:46 , 08-Июл-08

>Дурацкий вопрос
>как залить tar на catalyst 2950?
>Только IOS (*.bin) заливал неоднократно, но народ жаждет и html тоже.

Step 12 Remove the HTML files:

switch# delete flash:html/*

Press Enter to confirm the deletion of each file. Do not press any other keys during this process.
Caution In the following step, the tar command copies the combined .tar file that contains both the image and the HTML files. You do not need to copy an HTML .tar file in this procedure.

Step 13 Enter the following command to copy the new image and HTML files to Flash memory:

switch# tar /x tftp://server_ip_address//path/filename.tar flash:
Loading /path/filename.tar from server_ip_address (via VLAN1):!)
extracting info (110 bytes)

extracting c2950-c3h2s-mz.120-5.WC2.bin (7741440 bytes)!!!!!!!!!!!!!!!!!!!!

html/ (directory)

extracting html/Detective.html.gz (1139 bytes)!

extracting html/ieGraph.html.gz (553 bytes)

extracting html/DrawGraph.html.gz (787 bytes)

extracting html/GraphFrame.html.gz (802 bytes)!

...

Depending on the TFTP server being used, you might need to enter only one slash (/) after the server_ip_address in the tar command.

>[оверквотинг удален]
>extracting html/DrawGraph.html.gz (787 bytes)
>
>extracting html/GraphFrame.html.gz (802 bytes)!
>
>...
>
>
>Depending on the TFTP server being used, you might need to enter
>only one slash (/) after the server_ip_address in the tar command.
>

IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA11, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by cisco Systems, Inc.

tar?
% Unrecognized command
Нет такой команды :(

archive

>archive

Спасибо, все залилось