Подскажите, плз, а то какой-то ступор.
Усановил vwic2-2mft-g703 в 3825:
       WIC Slot 2:
       VWIC2-2MFT-G703 - 2-Port RJ-48 Multiflex Trunk - T1/E1 & G.703
       Hardware Revision        : 0.0
       Top Assy. Part Number    : 800-24920-05
       Board Revision           : B0
       Deviation Number         : 95966
       Fab Version              : 04
       PCB Serial Number        : FOC12220M17
       RMA Test History         : 00
       RMA Number               : 0-0-0-0
       RMA History              : 00
       Product (FRU) Number     : VWIC2-2MFT-G703
       Version Identifier       : V01
       EEPROM format version 4
       EEPROM contents (hex):
         0x00: 04 FF 40 03 FB 41 00 00 C0 46 03 20 00 61 58 05
         0x10: 42 42 30 88 00 01 76 DE 02 04 C1 8B 46 4F 43 31
         0x20: 32 32 32 30 4D 31 37 03 00 81 00 00 00 00 04 00
         0x30: CB 8F 56 57 49 43 32 2D 32 4D 46 54 2D 47 37 30
         0x40: 33 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF
         0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
но при этом sh controllers E1
не показывает ничего.
как так? как мне ее задействовать?

c3825#sh ver
Cisco IOS Software, 3800 Software (C3825-ADVENTERPRISEK9_IVS-M), Version 12.4(20)T, RELEASE SOFTWARE
(fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 11-Jul-08 01:42 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T10, RELEASE SOFTWARE (fc1)

c3825 uptime is 40 minutes
System returned to ROM by power-on
System restarted at 12:41:28 MSD Fri Sep 19 2008
System image file is "flash:c3825-adventerprisek9_ivs-mz.124-20.T.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 3825 (revision 1.0) with 748544K/37888K bytes of memory.
Processor board ID FCZ095444UM
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
2 Serial(sync/async) interfaces
1 terminal line
2 Channelized (E1 or T1)/PRI ports
1 Virtual Private Network (VPN) Module
1 cisco content engine(s)
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
977648K bytes of USB Flash usbflash0 (Read/Write)
990864K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

• vwic2-2mft-g703,CrAzOiD, 13:26 , 19-Сен-08
  • vwic2-2mft-g703,All is not what it seems, 13:34 , 19-Сен-08
    • vwic2-2mft-g703,CrAzOiD, 13:43 , 19-Сен-08
      • vwic2-2mft-g703,uone, 13:55 , 19-Сен-08
        • vwic2-2mft-g703,CrAzOiD, 14:03 , 19-Сен-08
          • vwic2-2mft-g703,All is not what it seems, 14:05 , 19-Сен-08
            • vwic2-2mft-g703,CrAzOiD, 14:09 , 19-Сен-08
              • vwic2-2mft-g703,uone, 14:20 , 19-Сен-08
                • vwic2-2mft-g703,CrAzOiD, 14:22 , 19-Сен-08

Забыл добавить что PVDM есть
PVDM Slot 0:
64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision        : 4.0
Part Number              : 73-8541-05
Board Revision           : A0
Deviation Number         : 0
Fab Version              : 04
PCB Serial Number        : FOC10172VBW
RMA Test History         : 00
RMA Number               : 0-0-0-0
RMA History              : 00
Processor type           : 00
Product (FRU) Number     : PVDM2-64
Version Identifier       : V01
EEPROM format version 4

опредилится с клокингом:
network-clock-participate wic 2
network-clock-select 1 E1 0/2/0
определится с сигнализацией:
isdn switch-type primary-net5
создать контролер:
controller E1 0/2/0
pri-group timeslots 1-31,16

>опредилится с клокингом:
>network-clock-participate wic 2
>network-clock-select 1 E1 0/2/0
>определится с сигнализацией:
>isdn switch-type primary-net5
>создать контролер:
>controller E1 0/2/0
> pri-group timeslots 1-31,16

c3825#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
c3825(config)#network-clock-participate wic 2
WIC slot is empty or does not support clock participate
c3825(config)#network-clock-select 1 E1 0/2/0
                                     ^
% Invalid input detected at '^' marker.

c3825(config)#network-clock-select 1 ?
  Serial  Serial

c3825(config)#network-clock-select 1

>[оверквотинг удален]
>            
>          
>          
>   ^
>% Invalid input detected at '^' marker.
>
>c3825(config)#network-clock-select 1 ?
>  Serial  Serial
>
>c3825(config)#network-clock-select 1

type card e1

>[оверквотинг удален]
>>          
>>   ^
>>% Invalid input detected at '^' marker.
>>
>>c3825(config)#network-clock-select 1 ?
>>  Serial  Serial
>>
>>c3825(config)#network-clock-select 1
>
>type card e1

c3825(config)#type
               ^
% Invalid input detected at '^' marker.

ил не там?

card type e1
http://www.cisco.com/en/US/docs/interfaces_modules/port_adap...

>card type e1
>http://www.cisco.com/en/US/docs/interfaces_modules/port_adap...

c3825(config)#card type e1 ?
    <0-2> Card slot number (always 0 for 1800 series & 2801 routers)

c3825(config)#card type e1 1 ?
    <cr>

c3825(config)#card type e1 1
Card in slot 1 was removed or does not support command.
c3825(config)#card type e1 2
Card in slot 2 was removed or does not support command.
c3825(config)#card type e1 ?
    <0-2> Card slot number (always 0 for 1800 series & 2801 routers)

c3825(config)#card type e1 0
% Incomplete command.

c3825(config)#card type e1 0 ?
    <0-3> WIC slot number (0:WIC, 1:Onboard for NM-HDV2)

c3825(config)#card type e1 0 0 ?
    <cr>

c3825(config)#card type e1 0 0
Card in slot 0 was removed or does not support command.
c3825(config)#

>[оверквотинг удален]
>
>c3825(config)#card type e1 0 ?
>    <0-3> WIC slot number (0:WIC, 1:Onboard for NM-HDV2)
>
>c3825(config)#card type e1 0 0 ?
>    <cr>
>
>c3825(config)#card type e1 0 0
>Card in slot 0 was removed or does not support command.
>c3825(config)#

card type e1 2 0

>[оверквотинг удален]
>>    <0-3> WIC slot number (0:WIC, 1:Onboard for NM-HDV2)
>>
>>c3825(config)#card type e1 0 0 ?
>>    <cr>
>>
>>c3825(config)#card type e1 0 0
>>Card in slot 0 was removed or does not support command.
>>c3825(config)#
>
>card type e1 2 0

card type e1 0 2
вот так вот заработала
спасибо!