Не появляется в конфиге сериал интерфейс, вот данные с цискиCisco IOS Software, C1700 Software (C1700-ADVIPSERVICESK9-M), Version 12.4(7), RELEASE SOFTWARE (fc6)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 01-Mar-06 08:15 by alnguyenROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
VOIP-Gateway uptime is 9 minutes
System returned to ROM by reload
System image file is "flash:c1700-advipservicesk9-mz.124-7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.htmlIf you require further assistance please contact us by sending email to
export@cisco.com.Cisco 1751-V (MPC860P) processor (revision 0x600) with 87391K/10913K bytes of memory.
Processor board ID FOC10343P8Z (3823816453), with hardware revision 0000
MPC860P processor: part number 5, mask 2
1 FastEthernet interface
1 Channelized E1/PRI port
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)Configuration register is 0x2102
VOIP-Gateway#sh
VOIP-Gateway#show inv
VOIP-Gateway#show inventory
NAME: "1751-V chassis", DESCR: "1751-V chassis, Hw Serial#: 3823816453, Hw Revision: 0x600"
PID: 1751-V , VID: 0x600, SN: FOC10343P8Z (3823816453)NAME: "Chassis Slot", DESCR: "1700 Chassis Slot"
PID: 1700 Chassis Slot , VID: , SN:NAME: "C1751 Mainboard", DESCR: "C1751 Mainboard"
PID: C1751 Mainboard , VID: 0x600, SN: FOC10343P8Z (3823816453)NAME: "Daughter card slot:0", DESCR: "1700 DaughterCard Slot"
PID: 1700 DaughterCard Slot, VID: , SN:NAME: "Daughter card slot:1", DESCR: "1700 DaughterCard Slot"
PID: 1700 DaughterCard Slot, VID: , SN:NAME: "Daughter card slot:2", DESCR: "1700 DaughterCard Slot"
PID: 1700 DaughterCard Slot, VID: , SN:NAME: "WIC/VIC 2", DESCR: "One port E1 voice interface daughtercard"
PID: VWIC-1MFT-E1= , VID: 1.0, SN: 31404320NAME: "E1 2/0", DESCR: "E1 2/0"
PID: E1 2/0 , VID: , SN:NAME: "DSP Module Slot 0", DESCR: "Packet Voice DSP Module Slot 0"
PID: Packet Voice DSP Module Slot 0, VID: , SN:NAME: "DSP Module 0", DESCR: "Packet Voice DSP Module with 3 C549 DSPs"
PID: Packet Voice DSP Module with 3 C549 DSPs, VID: 2.2, SN: ICP051002J8NAME: "DSP Port 0/0", DESCR: "C549"
PID: C549 , VID: , SN:NAME: "DSP Port 0/1", DESCR: "C549"
PID: C549 , VID: , SN:NAME: "DSP Port 0/2", DESCR: "C549"
PID: C549 , VID: , SN:NAME: "DSP Module Slot 1", DESCR: "Packet Voice DSP Module Slot 1"
PID: Packet Voice DSP Module Slot 1, VID: , SN:NAME: "DSP Module 1", DESCR: "Packet Voice DSP Module with 3 C549 DSPs"
PID: Packet Voice DSP Module with 3 C549 DSPs, VID: 2.2, SN: ICP05370067NAME: "DSP Port 1/0", DESCR: "C549"
PID: C549 , VID: , SN:NAME: "DSP Port 1/1", DESCR: "C549"
PID: C549 , VID: , SN:NAME: "DSP Port 1/2", DESCR: "C549"
PID: C549 , VID: , SN:NAME: "FastEthernet0/0", DESCR: "PQUICC_FEC"
PID: PQUICC_FEC , VID: , SN:
VOIP-Gateway#sh
VOIP-Gateway#show voi
VOIP-Gateway#show vo dsp
VOIP-Gateway#show vo dspDSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============Active Voice Call details
Current total analog signalling channels: 0
Current max allowed digital timeslot for voice: 30
Current active transcoding sessions: 0
Current free transcoding sessions: 0
Current active conferencing sessions: 0
Current free conferencing sessions: 1
Current number of DSP group: 1
Group 0:
Current allocated analog signalling channels: 0
Current free analog signalling channels: 0
Current allocated digital signalling channels: 0
Current free digital signalling channels: 30
Port(s) served: 2/0
Current Available MIPS: 600
SPMM DSPRM State Image D-sig D-sig A-sig A-sig Mips Voice/Xcode
Dsp Dsp allocate free allocate free Free Chan
0/0 0 UP CONF 0 0 0 0 100 0
0/1 1 UP FLEX6 0 6 0 0 100 0
0/2 2 UP FLEX6 0 6 0 0 100 0
1/0 3 UP FLEX6 0 6 0 0 100 0
1/1 4 UP FLEX6 0 6 0 0 100 0
1/2 5 UP FLEX6 0 6 0 0 100 0
Вот один из симптомов
VOIP-Gateway(config)#controller E1 2/0
VOIP-Gateway(config-controller)#pri-group timeslots 1-31
%Controller tdm clock does not have data capability
Current configuration : 1323 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname VOIP-Gateway
!
boot-start-marker
boot system flash c1700-advipservicesk9-mz.124-7.bin
boot-end-marker
!
enable password 7 999999999
!
no aaa new-model
!
resource policy
!
memory-size iomem 15
tdm clock E1 2/0 voice export line
voice-card 2
!
ip cef
!
!
!
!
!
isdn switch-type primary-net5
isdn voice-call-failure 0
isdn gateway-max-interworking
!
!
voice call send-alert
voice rtp send-recv
!
voice service pots
!
voice service voip
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
!
!
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
!
!
!
!
!
!
!
!
!
!
!
!
!
controller E1 2/0
framing NO-CRC4
!
!
!
!
!
interface FastEthernet0/0
ip address 1.1.1.162 255.0.0.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
speed auto
!
ip route 0.0.0.0 0.0.0.0 1.1.1.161
!
!
no ip http server
no ip http secure-server
!
!
!
control-plane
!
!
!
!
!
!
dspfarm confbridge maximum sessions 1
dspfarm codec g729 vad disable
dspfarm
!
!
!
line con 0
password 7 9999
login
line aux 0
line vty 0 4
password 7 99999
login
!
выньте из slot:2 и вставьте правильно
>выньте из slot:2 и вставьте правильноСпасибо за ответ. Не совсем понял как надо, не занимался ни когда втыканием модулей в циску, т.е. поток я должен вставить в слот 1 или как, честно не знаю как оно должно быть.
Спасибо народу, вставили поток в слот 0.
и прописали
controller E1 0/0И всё появилось =).