URL: https://www.opennet.me/cgi-bin/openforum/vsluhboard.cgi
Форум: vsluhforumID6
Нить номер: 4440
[ Назад ]

Исходное сообщение
"voip h323-disconect-cause=1 (unallocated number)"

Отправлено tim , 15-Дек-03 16:02 
Добрый день,
имеетса voip gateway на базе AS5400, подключенный с одной стороны к voip провайдеру, с другой, соответственно, к POTS. Не могу побороть низкий процент успешно завершенных звонков в направлении pots->voip. Т.е. звонки, приходящие по IP терминируютса нормально, процент успешных в среднем 32-35%, а вот звонки со стороны POTS - всего 5-6%. При этом практически все неудавшиеся звонки имеют h323-disconect-cause=1 (unallocated number). Вот конфигурация dial-peer-ов:
!
no voice hunt unassigned-number
no voice hunt invalid-number
voice call carrier capacity active
voice rtp send-recv
!
voice service voip
fax protocol t38 ls-redundancy 5 hs-redundancy 2
h323
  h225 timeout setup 20
!
voice class codec 100
codec preference 1 g729r8 bytes 40
codec preference 2 g723r63 bytes 48
codec preference 3 g723ar63 bytes 48
!
voice translation-rule 2000
rule 1 /.*/ //
!
voice translation-profile CLI_SUPPRESS
translate calling 2000
!
controller E1 7/0
ds0-group 1 timeslots 1-15,17-31 type r2-digital r2-compelled
cas-custom 1
  country easteurope
  dnis-digits min 1 max 12
timer interdigit incoming 1000
!
controller E1 7/1
ds0-group 1 timeslots 1-15,17-31 type r2-digital r2-compelled
cas-custom 1
  country easteurope
  dnis-digits min 1 max 15
timer interdigit incoming 1000
timer interdigit outgoing 1000
!
!
dial-peer voice 1000 voip
destination-pattern ......T
voice-class codec 100
session target ipv4:xxx.xxx.xxx.xxx
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax rate 9600
fax protocol t38 ls-redundancy 5 hs-redundancy 2
!
dial-peer voice 2000 voip
preference 2
destination-pattern ......T
voice-class codec 100
session target ipv4:yyy.yyy.yyy.yyy
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax rate 9600
fax protocol t38 ls-redundancy 5 hs-redundancy 2
!
dial-peer voice 100 pots
destination-pattern .T
progress_ind alert enable 8
progress_ind progress enable 8
direct-inward-dial
port 7/0:1
!
dial-peer voice 200 pots
incoming called-number .
direct-inward-dial
port 7/1:1
!

У кого какие мысли? Заранее благодарен


Содержание

Сообщения в этом обсуждении
"voip h323-disconect-cause=1 (unallocated number)"
Отправлено Wowa , 16-Дек-03 09:34 
>Добрый день,
>имеетса voip gateway на базе AS5400, подключенный с одной стороны к voip провайдеру, с другой, соответственно, к POTS. Не могу побороть низкий процент успешно завершенных звонков в направлении pots->voip. Т.е. звонки, приходящие по IP терминируютса нормально, процент успешных в среднем 32-35%,

Вы считаете это нормальный процент (если только с учетом user busy и неправильный набор номера)? Это не по теме, так, к слову.

а вот звонки со стороны POTS - всего 5-6%. При этом практически все неудавшиеся звонки имеют h323-disconect-cause=1 (unallocated number). Вот конфигурация dial-peer-ов:

Смотрим описание ошибки:
The ISDN number was sent to the switch in the correct format; however, the number is not assigned to any destination equipment.

Т,е, номер набран правильно, но свич не знает куда его направить.


>!
>!
>dial-peer voice 1000 voip
> destination-pattern ......T

Может проблема в этом - вы хотите от юзеров набрать минимум 6 цифр. но большая вероятность что они набирают меньше?
Еще, посмотрите (например снифером) какие номера уходят в IP, и тот ли это формат, который нужен VoIP провайдеру.

> voice-class codec 100
> session target ipv4:xxx.xxx.xxx.xxx
> dtmf-relay h245-alphanumeric
> fax-relay ecm disable
> fax rate 9600
> fax protocol t38 ls-redundancy 5 hs-redundancy 2
>!
>dial-peer voice 2000 voip
> preference 2
> destination-pattern ......T
> voice-class codec 100
> session target ipv4:yyy.yyy.yyy.yyy
> dtmf-relay h245-alphanumeric
> fax-relay ecm disable
> fax rate 9600
> fax protocol t38 ls-redundancy 5 hs-redundancy 2
>!
>dial-peer voice 100 pots
> destination-pattern .T
> progress_ind alert enable 8
> progress_ind progress enable 8
> direct-inward-dial
> port 7/0:1
>!
>dial-peer voice 200 pots
> incoming called-number .
> direct-inward-dial
> port 7/1:1
>!
>
>У кого какие мысли? Заранее благодарен



"voip h323-disconect-cause=1 (unallocated number)"
Отправлено tim , 16-Дек-03 19:10 

>Вы считаете это нормальный процент (если только с учетом user busy и
>неправильный набор номера)? Это не по теме, так, к слову.
32-35% это с учетом user busy и т.п., наш провайдер сказал что это нормально :)

>Смотрим описание ошибки:
> The ISDN number was sent to the switch in the correct
>format; however, the number is not assigned to any destination equipment.
>
>
>Т,е, номер набран правильно, но свич не знает куда его направить.
>

А не может быть так, что звонок пытаетса уйти в pots, т.е. матчитса peer 100?


"voip h323-disconect-cause=1 (unallocated number)"
Отправлено tim , 16-Дек-03 21:07 
>А не может быть так, что звонок пытаетса уйти в pots, т.е.
>матчитса peer 100?

вот что показывает sh call hist voice com:
G<id>  A/O FAX T<sec> Codec       type  Peer Address       IP R<ip>:<udp> disc-cause
G2E11  ORG     T0     None        TELE  P99599732893 D1
G2E11  ANS     T0     None        TELE  P D1
G2E0E  ORG     T0     None        TELE  P971504215007 D1
G2E0E  ANS     T0     None        TELE  P D1

т.е. звонок пошел в телефонию, вместо тго чтобы уйти к провайдеру


"voip h323-disconect-cause=1 (unallocated number)"
Отправлено Wowa , 17-Дек-03 09:19 
>>А не может быть так, что звонок пытаетса уйти в pots, т.е.
>>матчитса peer 100?
>
>вот что показывает sh call hist voice com:
>G<id>  A/O FAX T<sec> Codec       type  Peer Address       IP R<ip>:<udp> disc-cause
>G2E11  ORG     T0    
>None        TELE  P99599732893
>D1
>G2E11  ANS     T0    
>None        TELE  P
>D1
>G2E0E  ORG     T0    
>None        TELE  P971504215007
>D1
>G2E0E  ANS     T0    
>None        TELE  P
>D1
>
>т.е. звонок пошел в телефонию, вместо тго чтобы уйти к провайдеру


Да, похоже на то, что звонок уходит в телефонию..., посмотри sh call act v b, там видно на какие диал-пиры попадает звонок.
Если не предоставляешь терминацию по всем направлениям, поставь что-нибудь более конкретное на dial-peer 100, а дальше смотри, почему отлуп от провайдера приходит,


"voip h323-disconect-cause=1 (unallocated number)"
Отправлено Sonne , 16-Дек-03 16:45 
IMHO надо поиграться с диалпланом. Посмотреть в каких форматах хочет получать номер АТС, провайдер и в каких форматах они это посылают на самом деле.

"voip h323-disconect-cause=1 (unallocated number)"
Отправлено ВОЛКА , 17-Дек-03 09:51 
с такими диалпирами - это не удивительно....