Как узнать какие модули установлены и есть ли возможность воткнуть еще чтонибудь.
CiscoAS#show ver
Cisco Internetwork Operating System Software
IOS (tm) 5350 Software (C5350-IS-M), Version 12.3(9), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 14-May-04 15:46 by dchih
Image text-base: 0x60008AFC, data-base: 0x61700000ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
BOOTLDR: 5350 Software (C5350-BOOT-M), Version 12.2(2)XB2, EARLY DEPLOYMENT RELEASE S
OFTWARE (fc1)CiscoAS uptime is 12 hours, 37 minutes
System returned to ROM by reload at 19:55:51 MSD Wed Sep 1 2004
System restarted at 19:56:30 MSD Wed Sep 1 2004
System image file is "flash:c5350-is-mz.123-9.bin"cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of memory.
Processor board ID JAE07230071
R7000 CPU at 250MHz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from IOS reload
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Primary Rate ISDN software, Version 1.1.
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32,
Board Hardware Version 3.34, Item Number 800-5171-02,
Board Revision C0, Serial Number JAE07230071,
PLD/ISP Version 2.2, Manufacture Date 6-Jun-2003.
Processor 0x14, MAC Address 0x0C85A57B98
Backplane HW Revision 1.0, Flash Type 5V
2 FastEthernet/IEEE 802.3 interface(s)
37 Serial network interface(s)
60 terminal line(s)
2 Channelized E1/PRI port(s)
512K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)Configuration register is 0x2102
sh diag
show diag
Slot 0:
AS5350 Motherboard (сама "мать")Slot 1:
DFC type is AS5350 NP60 DFCSlot 2:
DFC type is AS5350 Empty DFC
DFC is not poweredSlot 3:
DFC type is AS5350 E1 2 PRI DFC (ну тут понятно 2E1 для модемов)а с остальным ?
Сейчас на ней крутися диалап на 60 модемов, что еще можно запустить не изменяя конфигурации
вопрос некорректный...