не могу залить иос во флеш.
rommon 32 > set
PS1=rommon ! >
ip_address=172.16.2.188
ip_subnet_mask=255.255.0.0
default_gateway=172.16.2.1
tftp_server=172.16.2.229
?=0
tftp_file=c2600-i-mz.122-5a
rommon 33 > tftpdnldMissing or illegal ip address for variable IP_ADDRESS
Illegal IP address.usage: tftpdnld [-r]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.The following variables are REQUIRED to be set for tftpdnld:
IP_ADDRESS: The IP address for this unit
IP_SUBNET_MASK: The subnet mask for this unit
DEFAULT_GATEWAY: The default gateway for this unit
TFTP_SERVER: The IP address of the server to fetch from
TFTP_FILE: The filename to fetchThe following variables are OPTIONAL:
TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=7)
TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)Command line options:
-r: do not write flash, load to DRAM only and launch image
rommon 34 >
>не могу залить иос во флеш.
>
>rommon 32 > set
>PS1=rommon ! >
>ip_address=172.16.2.188
>ip_subnet_mask=255.255.0.0
>default_gateway=172.16.2.1
>tftp_server=172.16.2.229
>?=0
>tftp_file=c2600-i-mz.122-5a
>rommon 33 > tftpdnld
>
>Missing or illegal ip address for variable IP_ADDRESS
>Illegal IP address.
>
>usage: tftpdnld [-r]
> Use this command for disaster recovery only to recover an
>image via TFTP.
> Monitor variables are used to set up parameters for the
>transfer.
> (Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
> "ctrl-c" or "break" stops the transfer before flash erase begins.
>
>
> The following variables are REQUIRED to be set for tftpdnld:
>
>
>IP_ADDRESS: The IP address for this unit
> IP_SUBNET_MASK: The subnet mask
>for this unit
> DEFAULT_GATEWAY: The default gateway for
>this unit
> TFTP_SERVER:
>The IP address of the server to fetch from
>
> TFTP_FILE: The filename to fetch
>
> The following variables are OPTIONAL:
> TFTP_VERBOSE: Print
>setting. 0=quiet, 1=progress(default), 2=verbose
> TFTP_RETRY_COUNT: Retry count for ARP and
>TFTP (default=7)
> TFTP_TIMEOUT: Overall
>timeout of operation in seconds (default=7200)
> TFTP_CHECKSUM: Perform checksum
>test on image, 0=no, 1=yes (default=1)
>
> Command line options:
> -r: do not write flash, load to DRAM only
>and launch image
>rommon 34 >
Можно еще через xmodem залить. Только это довольно долго...
>Missing or illegal ip address for variable IP_ADDRESS
>Illegal IP address.
большими буквами переменные писать надо