не хотят работать, они совместимы?cs3548_1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)XW, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Thu 14-Dec-00 14:26 by devgoyal
Image text-base: 0x00003000, data-base: 0x00329DF8ROM: Bootstrap program is C3500XL boot loader
cs3548_1 uptime is 14 weeks, 5 days, 2 hours, 13 minutes
System returned to ROM by power-on
System image file is "flash:c3500XL-c3h2s-mz-120.5-XW.bin"
cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes of memory.
Processor board ID FAB0535U1X4, with hardware revision 0x00
Last reset from power-onProcessor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:07:50:84:8F:40
Motherboard assembly number: 73-3903-08
Power supply part number: 34-0971-01
Motherboard serial number: FAB053518H5
Power supply serial number: APQ053402HQ
Model revision number: A0
Motherboard revision number: C0
Model number: WS-C3548-XL-EN
System serial number: FAB0535U1X4
Configuration register is 0xF029025: *Jun 12 02:17:14: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC module is detected in Gi0/2. Speed and duplex will be autonegotiated
даю
cs3548_1(config)#int gi0/2
cs3548_1(config-if)#no shut
cs3548_1(config-if)#
029026: *Jun 12 02:19:36: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
029027: *Jun 12 02:19:36: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to downподымается и сразу падает
в чем проблема?
>029026: *Jun 12 02:19:36: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
>029027: *Jun 12 02:19:36: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
>
>подымается и сразу падает
>в чем проблема?
Провод подключен к нему?
конечно
сетевуха intel pro 1000 GT
http://www.cisco.com/univercd/cc/td/doc/product/gbic_sfp/gbi...
судя по таблице у тебя все соответствует требованиямпопробуй покачать вилку в GBIC и на сетевой плате принудительно поставить 1000 fullduplex. Столкнулись с тем что autonegotiated не работает.
Удачи.