Здраствуйте.
Имеется 7206VXR --E1--Watson4--Watson4--E1--Telrad
На cisco PA-VXA-1TE1
Проблема с передачей факсов.
После разборки обнаружились ошибки#sh controllers e1 3/0
E1 3/0 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Active xconns: 7
Data in current interval (32 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
22 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
22 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secsпро которые написано, что это они виноваты с факсовой бедой.
После вторичного прочтения доки по настройке контроллера
добавил команду
frame-clock-select 1 E1 3/0Но после её установки
#sh frame-clocks
Priority 1 clock source: E1 3/0 input: Primary UP
Priority 2 clock source: not configured input: none
Priority 3 clock source: not configured input: none
Priority 4 clock source: not configured input: none
Current clock source:E1 3/0, input: Primary, priority: 1данные результаты держатся секунд 10, а после
выдаётсяSep 16 07:35:41.517: %TDM_CLOCK_SYNCHRONIZATION-4-TDMCLK_CHANGE:
TDM frame clock source transitioned from
Priority 1 E1 3/0 UP to Priority 1 E1 3/0 UPи команда
sh frame-clocks
Priority 1 clock source: E1 3/0 input: Primary UP
Priority 2 clock source: not configured input: none
Priority 3 clock source: not configured input: none
Priority 4 clock source: not configured input: none
Current clock source:Local oscillator, input: Internal, priority: 5
показывает что мы вернулись на прежнюю позицию.Кто виноват и что делать ?
IOS 12.4
isdn switch-type primary-net5
controller E1 3/0
pri-group timeslots 1-31спасибо за советы
Юрий Козлов
Ну в общем сам себе и отвечу: замена линии.