Уважаемые гуру. Спасите.
Давиче решылса поставить на свю лошадку BSD. Ну перед етим пробоавл на Ubuntu Live CD. Все нормально. Работем аж перегреваемся.
Но посколько дуже ближе к FreeBSD, (Кнопис, Десктоп и Драгон пробовал: таже ж.) решыл я ее поставить.
Все нормально, но по роботе иногда нужны Х-ы. Ну и давай их настраивать. Все вроде нормально карточку увидел. Но при запуске Х.org-a Мертвый зависон. Спасает только красная кнопочка.
Читем логи:
...
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(==) Silicon MotionWrite-combining range (0xa0000,0x20000) was already clear
(==) Silicon MotionWrite-combining range (0xc0000,0x40000) was already clear
(II) Silicon MotionPrimary V_BIOS segment is: 0xc000
(==) Silicon MotionWrite-combining range (0x0,0x1000) was already clear
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Silicon MotionVESA BIOS not detected
(--) Silicon MotionChipset: "Lynx3DM"
(==) Silicon MotionWrite-combining range (0xf8000000,0x200000) was already clear
(II) Silicon MotionCursor Offset: FFFFFC00 Reserved: FFFFF800
(II) Silicon MotionTFT Panel Size = 800x600
(II) Silicon MotionvgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) Silicon MotionWrite-combining range (0xa0000,0x10000) was already clear
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Silicon MotionI2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) Silicon MotionNo DDC signal
(II) Silicon MotionI2C device "I2C bus:ddc2" registered at address 0xA0.
(II) Silicon MotionI2C device "I2C bus:ddc2" removed.
(==) Silicon MotionWrite-combining range (0x0,0x1000) was already clear
(==) Silicon MotionUsing gamma correction (1.0, 1.0, 1.0)
(--) Silicon Motionvideoram: 4096kB
(--) Silicon MotionDetected current MCLK value of 100.227 MHz
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Silicon MotionI2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) Silicon MotionNo DDC signal
(II) Silicon MotionI2C device "I2C bus:ddc2" registered at address 0xA0.
(II) Silicon MotionI2C device "I2C bus:ddc2" removed.
(==) Silicon MotionWrite-combining range (0x0,0x1000) was already clear
(==) Silicon MotionUsing gamma correction (1.0, 1.0, 1.0)
(--) Silicon Motionvideoram: 4096kB
(--) Silicon MotionDetected current MCLK value of 100.227 MHz
(==) Silicon MotionWrite-combining range (0xf8000000,0x200000) was already clear
(II) Silicon MotionCursor Offset: FFFFFC00 Reserved: FFFFF800
(II) Silicon MotionTFT Panel Size = 800x600
(II) Silicon MotionvgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) Silicon MotionWrite-combining range (0xa0000,0x10000) was already clear
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Silicon MotionI2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) Silicon MotionNo DDC signal
(II) Silicon MotionI2C device "I2C bus:ddc2" registered at address 0xA0.
(II) Silicon MotionI2C device "I2C bus:ddc2" removed.
(==) Silicon MotionWrite-combining range (0x0,0x1000) was already clear
(==) Silicon MotionUsing gamma correction (1.0, 1.0, 1.0)
(--) Silicon Motionvideoram: 4096kB
...
и началось
...
(==) Silicon MotionWrite-combining range (0xf8000000,0x200000) was already clear
(WW) Silicon MotionFailed to set write-combining range (0xf8200000,0x400000)
(II) Silicon MotionCursor Offset: 003FFC00 Reserved: 003FF800
(II) Silicon MotionTFT Panel Size = 800x600
(II) Silicon MotionvgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) Silicon MotionWrite-combining range (0xa0000,0x10000) was already clear
(==) Silicon MotionWrite-combining range (0xa0000,0x20000) was already clear
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E
[15] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E
[16] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]E
[17] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]E
[18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) Silicon MotionWrite-combining range (0xf8000000,0x200000) was already clear
(WW) Silicon MotionFailed to set write-combining range (0xf8200000,0x400000)
(II) Silicon MotionCursor Offset: 003FFC00 Reserved: 003FF800
(II) Silicon MotionTFT Panel Size = 800x600
(II) Silicon MotionvgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) Silicon MotionWrite-combining range (0xa0000,0x10000) was already clear
(==) Silicon MotionWrite-combining range (0xa0000,0x20000) was already clear
(II) Silicon MotionPrimary V_BIOS segment is: 0xc000
(==) Silicon MotionWrite-combining range (0x0,0x1000) was already clear
(II) Silicon MotionCurrent mode 0x00.
(II) Silicon Motion SMI_GEReset called from smi_driver.c line 1579
(II) Silicon Motion SMI_GEReset called from smi_accel.c line 263
(II) Silicon Motion SMI_GEReset called from smi_accel.c line 263
(II) Silicon Motion SMI_GEReset called from smi_accel.c line 263
(II) Silicon Motion SMI_GEReset called from smi_accel.c line 263
(II) Silicon Motion SMI_GEReset called from smi_accel.c line 263
(II) Silicon Motion SMI_GEReset called from smi_accel.c line 263
(II) Silicon Motion SMI_GEReset called from smi_accel.c line 263
....
И так надцать раз.
Спасите (ноут) а то уже крыша едед.
Буду очень благодарен.
Зарание сенкс.
Попробуйте option "NoAccel" "yes" в секции видеокарты.
Как вариант - апгрейд до Xorg 6.9.0--
Jay