inotifywait
efficiently waits for changes to files using Linux's
inotify(7)
interface. It is suitable for waiting for changes to files from shell scripts.
It can either exit once an event occurs, or continually execute and output events
as they occur.
OUTPUT
inotifywait
will output diagnostic information on standard error and event information on
standard output. The event output can be configured, but by default it
consists of lines of the following form:
watched_filename EVENT_NAMES event_filename
watched_filename
is the name of the file on which the event occurred. If the file is a directory,
a trailing slash is output.
EVENT_NAMES
are the names of the inotify events which occurred, separated by commas.
event_filename
is output only when the event occurred on a directory, and in this case the name
of the file within the directory which caused this event is output.
By default, any special characters in filenames are not escaped in any way. This
can make the output of inotifywait difficult to parse in awk scripts or similar.
The
--csv
and
--format
options will be helpful in this case.
OPTIONS
-h, --help
Output some helpful usage information.
@<file>
When watching a directory tree recursively, exclude the specified file from
being watched. The file must be specified with a relative or absolute path
according to whether a relative or absolute path is given for watched
directories. If a specific path is explicitly both included and excluded, it
will always be watched.
Note:
If you need to watch a directory or file whose name starts with @, give the
absolute path.
--fromfile <file>
Read filenames to watch or exclude from a file, one filename per line. If
filenames begin with @ they are excluded as described above. If <file> is `-',
filenames are read from standard input. Use this option if you need to watch
too many files to pass in as command line arguments.
-m, --monitor
Instead of exiting after receiving a single event, execute indefinitely. The
default behaviour is to exit after the first event occurs.
-r, --recursive
Watch all subdirectories of any directories passed as arguments. Watches
will be set up recursively to an unlimited depth. Symbolic links are not
traversed. Newly created subdirectories will also be watched.
Warning:
If you use this option while watching the root directory
of a large tree, it may take quite a while until all inotify watches are
established, and events will not be received in this time. Also, since one
inotify watch will be established per subdirectory, it is possible that the
maximum amount of inotify watches per user will be reached. The default
maximum is 8192; it can be increased by writing to
/proc/sys/fs/inotify/max_user_watches.
-q, --quiet
If specified once, the program will be less verbose. Specifically, it will not
state when it has completed establishing all inotify watches.
If specified twice, the program will output nothing at all, except in the case
of fatal errors.
--exclude <pattern>
Do not process any events whose filename matches the specified POSIX extended
regular expression, case sensitive.
--excludei <pattern>
Do not process any events whose filename matches the specified POSIX extended
regular expression, case insensitive.
-t <seconds>, --timeout <seconds>
Listen for an event for the specified amount of seconds, exiting if an event
has not occurred in that time.
-e <event>, --event <event>
Listen for specific event(s) only. The events which can be listened for are
listed in the
EVENTS
section. This option can be specified more than once. If omitted, all events
are listened for.
-c, --csv
Output in CSV (comma-separated values) format. This is useful when filenames
may contain spaces, since in this case it is not safe to simply split the output
at each space character.
--timefmt <fmt>
Set a time format string as accepted by strftime(3) for use with the `%T' conversion
in the --format option.
--format <fmt>
Output in a user-specified format, using printf-like syntax. The event strings
output are limited to around 4000 characters and will be truncated to this length.
The following conversions are supported:
%w
This will be replaced with the name of the Watched file on which an event occurred.
%f
When an event occurs within a directory, this will be replaced with the name of the
File which caused the event to occur. Otherwise, this will be replaced with an
empty string.
%e
Replaced with the Event(s) which occurred, comma-separated.
%Xe
Replaced with the Event(s) which occurred, separated by whichever character is
in the place of `X'.
%T
Replaced with the current Time in the format specified by the --timefmt option,
which should be a format string suitable for passing to strftime(3).
EXIT STATUS
0
The program executed successfully, and an event occurred which was being
listened for.
1
An error occurred in execution of the program, or an event occurred which was
not being listened for. The latter generally occurs if something happens which
forcibly removes the inotify watch, such as a watched file being deleted or the
filesystem containing a watched file being unmounted.
2
The
-t
option was used and an event did not occur in the specified interval of time.
EVENTS
The following events are valid for use with the
-e
option:
access
A watched file or a file within a watched directory was read from.
modify
A watched file or a file within a watched directory was written to.
attrib
The metadata of a watched file or a file within a watched directory was
modified. This includes timestamps, file permissions, extended attributes etc.
close_write
A watched file or a file within a watched directory was closed, after being
opened in writeable mode. This does not necessarily imply the file was written
to.
close_nowrite
A watched file or a file within a watched directory was closed, after being
opened in read-only mode.
close
A watched file or a file within a watched directory was closed, regardless of
how it was opened. Note that this is actually implemented simply by listening
for both
close_write
and
close_nowrite,
hence all close events received will be output as one of these, not
CLOSE.
open
A watched file or a file within a watched directory was opened.
moved_to
A file or directory was moved into a watched directory. This event occurs even
if the file is simply moved from and to the same directory.
moved_from
A file or directory was moved from a watched directory. This event occurs even
if the file is simply moved from and to the same directory.
move
A file or directory was moved from or to a watched directory. Note that this is
actually implemented simply by listening for both
moved_to
and
moved_from,
hence all close events received will be output as one or both of these, not
MOVE.
create
A file or directory was created within a watched directory.
delete
A file or directory within a watched directory was deleted.
delete_self
A watched file or directory was deleted. After this event the file or directory
is no longer being watched. Note that this event can occur even if it is not
explicitly being listened for.
unmount
The filesystem on which a watched file or directory resides was unmounted.
After this event the file or directory is no longer being watched. Note that
this event can occur even if it is not explicitly being listened to.
EXAMPLES
Example 1
Running inotifywait at the command-line to wait for any file in the `test'
directory to be accessed. After running inotifywait, `cat test/foo' is run
in a separate console.
% inotifywait test
Setting up watches.
Watches established.
test/ ACCESS foo
Example 2
A short shell script to efficiently wait for httpd-related log messages and
do something appropriate.
#!/bin/sh
while inotifywait -e modify /var/log/messages; do
if tail -n1 /var/log/messages | grep httpd; then
kdialog --msgbox "Apache needs love!"
fi
done
Example 3
A custom output format is used to watch `~/test'. Meanwhile, someone runs
`touch ~/test/badfile; touch ~/test/goodfile; rm ~/test/badfile' in another
console.
% inotifywait -m -r --format '%:e %f' ~/test
Setting up watches. Beware: since -r was given, this may take a while!
Watches established.
CREATE badfile
OPEN badfile
ATTRIB badfile
CLOSE_WRITE:CLOSE badfile
CREATE goodfile
OPEN goodfile
ATTRIB goodfile
CLOSE_WRITE:CLOSE goodfile
DELETE badfile
BUGS
There are race conditions in the recursive directory watching code
which can cause events to be missed if they occur in a directory immediately
after that directory is created. This is probably not fixable.
It is assumed the inotify event queue will never overflow.
AUTHORS
inotifywait is written and maintained by Rohan McGovern <[email protected]>.
