The
device driver provides a read only interface for CDROM drives
( SCSI
type 5)
and WORM drives
( SCSI
type 4)
that support CDROM type commands.
Some drives do not behave as the driver expects.
See the
Sx QUIRKS
section for information on possible flags.
QUIRKS
Each
CD-ROM
device can have different interpretations of the
SCSI
spec.
This can lead to drives requiring special handling in the driver.
The following is a list of quirks that the driver recognize.
CD_Q_NO_TOUCH
This flag tell the driver not to probe the drive at attach time to see if
there is a disk in the drive and find out what size it is.
This flag is currently unimplemented in the CAM
driver.
CD_Q_BCD_TRACKS
This flag is for broken drives that return the track numbers in packed BCD
instead of straight decimal.
If the drive seems to skip tracks
(tracks 10-15 are skipped)
then you have a drive that is in need of this flag.
CD_Q_NO_CHANGER
This flag tells the driver that the device in question is not a changer.
This is only necessary for a CDROM device with multiple luns that are not a
part of a changer.
CD_Q_CHANGER
This flag tells the driver that the given device is a multi-lun changer.
In general, the driver will figure this out automatically when it sees a
LUN greater than 0.
Setting this flag only has the effect of telling the
driver to run the initial read capacity command for LUN 0 of the changer
through the changer scheduling code.
CD_Q_10_BYTE_ONLY
This flag tells the driver that the given device only accepts 10 byte MODE
SENSE/MODE SELECT commands.
In general these types of quirks should not be
added to the
cd(4)
driver.
The reason is that the driver does several things to attempt to
determine whether the drive in question needs 10 byte commands.
First, it
issues a CAM Path Inquiry command to determine whether the protocol that
the drive speaks typically only allows 10 byte commands.
(ATAPI and USB
are two prominent examples of protocols where you generally only want to
send 10 byte commands.)
Then, if it gets an ILLEGAL REQUEST error back
from a 6 byte MODE SENSE or MODE SELECT command, it attempts to send the 10
byte version of the command instead.
The only reason you would need a
quirk is if your drive uses a protocol (e.g.,
SCSI
that typically does not have a problem with 6 byte commands.
An -nosplit
This
manual page was written by
An John-Mark Gurney Aq [email protected] .
It was updated for CAM and
Fx 3.0
by
An Kenneth Merry Aq [email protected] .
