Date: Tue, 30 Jul 2002 11:21:04 -0700 (PDT)
From: FreeBSD Security Advisories <security-advisories@freebsd.org.>
To: Bugtraq <bugtraq@securityfocus.com.>
Subject: FreeBSD Security Advisory FreeBSD-SA-02:23.stdio [REVISED]
-----BEGIN PGP SIGNED MESSAGE-----
FreeBSD-SA-02:23.stdio Security Advisory
The FreeBSD Project
Topic: insecure handling of stdio file descriptors
Category: core
Module: kernel
Announced: 2002-04-22
Credits: Joost Pol <joost@pine.nl.>,
Georgi Guninski <guninski@guninski.com.>
Affects: All releases of FreeBSD up to and including 4.6-RELEASE
4.6-STABLE prior to the correction date
Corrected: 2002-07-30 15:40:46 UTC (RELENG_4)
2002-07-30 15:42:11 UTC (RELENG_4_6)
2002-07-30 15:42:46 UTC (RELENG_4_5)
2002-07-30 15:43:17 UTC (RELENG_4_4)
FreeBSD only: NO
0. Revision History
v1.0 2002-04-22 Initial release
v1.1 2002-04-23 Patch and revision numbers updated
v1.2 2002-07-29 procfs issue; updated patch
I. Background
By convention, POSIX systems associate file descriptors 0, 1, and 2
with standard input, standard output, and standard error,
respectively. Almost all applications give these stdio file
descriptors special significance, such as writing error messages to
standard error (file descriptor 2).
In new processes, all file descriptors are duplicated from the parent
process. Unless these descriptors are marked close-on-exec, they
retain their state during an exec.
All POSIX systems assign file descriptors in sequential order,
starting with the lowest unused file descriptor. For example, if a
newly exec'd process has file descriptors 0 and 1 open, but file
descriptor 2 closed, and then opens a file, the new file descriptor is
guaranteed to be 2 (standard error).
II. Problem Description
Some programs are set-user-id or set-group-id, and therefore run with
increased privileges. If such a program is started with some of the
stdio file descriptors closed, the program may open a file and
inadvertently associate it with standard input, standard output, or
standard error. The program may then read data from or write data to
the file inappropriately. If the file is one that the user would
normally not have privileges to open, this may result in an
opportunity for privilege escalation.
The original correction for this problem (corresponding to the first
revision of this advisory) contained an error. Systems using procfs
or linprocfs could still be exploited. The dates for the original,
incomplete correction were:
Corrected: 2002-04-21 13:06:45 UTC (RELENG_4)
2002-04-21 13:08:57 UTC (RELENG_4_5)
2002-04-21 13:10:51 UTC (RELENG_4_4)
III. Impact
Local users may gain superuser privileges. It is known that the
`keyinit' set-user-id program is exploitable using this method. There
may be other programs that are exploitable.
IV. Workaround
[FreeBSD systems earlier than 4.5-RELEASE-p4 and 4.4-RELEASE-p11]
None. The set-user-id bit may be removed from `keyinit' using the
following command, but note that there may be other programs that can
be exploited.
# chmod 0555 /usr/bin/keyinit
[FreeBSD versions 4.5-RELEASE-p4 or later, 4.4-RELEASE-p11 or later,
4.6-RELEASE, and 4.6-STABLE]
Unmount all instances of the procfs and linprocfs filesystems using
the umount(8) command:
# umount -f -a -t procfs
# umount -f -a -t linprocfs
V. Solution
The kernel was modified to check file descriptors 0, 1, and 2 when
starting a set-user-ID or set-group-ID executable. If any of these
are not in use, they will be redirected to /dev/null.
1) Upgrade your vulnerable system to 4.6-STABLE; or to any of
the RELENG_4_6 (4.6.1-RELEASE-p1), RELENG_4_5 (4.5-RELEASE-p10), or
RELENG_4_4 (4.4-RELEASE-p17) security branches dated after the
respective correction dates.
2) To patch your present system:
a) Download the relevant patch from the location below, and verify the
detached PGP signature using your PGP utility.
[FreeBSD systems earlier than 4.5-RELEASE-p4 and 4.4-RELEASE-p11]
# fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/patches/SA-02:23/stdio.patch.v1.2
# fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/patches/SA-02:23/stdio.patch.v1.2.asc
[FreeBSD versions 4.5-RELEASE-p4 or later, 4.4-RELEASE-p11 or later,
4.6-RELEASE, and 4.6-STABLE]
# fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/patches/SA-02:23/stdio2.patch.v1.2
# fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/patches/SA-02:23/stdio2.patch.v1.2.asc
b) Execute the following commands as root:
# cd /usr/src
# patch < /path/to/patch
c) Recompile your kernel as described in
http://www.freebsd.org/handbook/kernelconfig.html and reboot the
system.
VI. Correction details
The following list contains the revision numbers of each file that was
corrected in FreeBSD.
Path Revision
Branch
- -------------------------------------------------------------------------
sys/sys/filedesc.h
RELENG_4 1.19.2.4
RELENG_4_6 1.19.2.4
RELENG_4_5 1.19.2.3.6.1
RELENG_4_4 1.19.2.3.4.1
sys/kern/kern_exec.c
RELENG_4 1.107.2.15
RELENG_4_6 1.107.2.14.2.1
RELENG_4_5 1.107.2.13.2.2
RELENG_4_4 1.107.2.8.2.3
sys/kern/kern_descrip.c
RELENG_4 1.81.2.12
RELENG_4_6 1.81.2.14
RELENG_4_5 1.81.2.9.2.2
RELENG_4_4 1.81.2.8.2.2
sys/conf/newvers.sh
RELENG_4_6 1.44.2.23.2.6
RELENG_4_5 1.44.2.20.2.11
RELENG_4_4 1.44.2.17.2.16
- -------------------------------------------------------------------------
VII. References
PINE-CERT-20020401 <URL:http://www.pine.nl/advisories/pine-cert-20020401.txt>;
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (FreeBSD)
iQCVAwUBPUbXw1UuHi5z0oilAQFgKQP/eOnmHorw/4NVEAEKTQp4+X7Px9p1wUGq
6OcLH5GuTbbwexd7KbCjbjzNZF7zgz1Qph2v7NQXb+W/ZaW2hEgcoURXkBomVxjl
61oXu72P35bmgNo7GQ794v/WDHd8FymtBv0kyY/vuZqg6l99tTuwi2ryV1ZszVrh
w21lAbhkyQo=
=YGVw
-----END PGP SIGNATURE-----
