From: Cisco Systems Product Security Incident Response Team <psirt@cisco.com.>
To: [email protected]Subject: Cisco Security Advisory: Multiple Vulnerabilities in the WLSE Appliance
Date: Wed, 19 Apr 2006 17:00:00 +0200
Message-id: <200604191700.wlse@psirt.cisco.com.>
Reply-To: [email protected]
Errors-To: [email protected]
Content-Type: Text/Plain; charset="us-ascii"
Content-Transfer-Encoding: 8bit
Prevent-NonDelivery-Report:
Content-Return: Prohibited
X-Virus-Scanned: antivirus-gw at tyumen.ru
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Cisco Security Advisory: Multiple Vulnerabilities in the WLSE
Appliance
Advisory ID: cisco-sa-20060419-wlse
http://www.cisco.com/warp/public/707/cisco-sa-20060419-wlse.shtml
Revision 1.0
For Public Release 2006 April 19 1500 UTC (GMT)
- ---------------------------------------------------------------------
Contents
========
Summary
Affected Products
Details
Impact
Software Version and Fixes
Workarounds
Obtaining Fixed Software
Exploitation and Public Announcements
Status of this Notice: FINAL
Distribution
Revision History
Cisco Security Procedures
- ---------------------------------------------------------------------
Summary
=======
There are two vulnerabilities that exist in the CiscoWorks Wireless
LAN Solution Engine (WLSE). The first is a cross site scripting (XSS)
vulnerability that may allow an attacker to gain administrative
privileges on the system. The second is a local privilege escalation
vulnerability that can be used by an attacker who already has
authenticated access to the command line interface to obtain access
to the underlying operating system.
Cisco has made free software available to address this vulnerability
for affected customers.
This advisory is available at
http://www.cisco.com/warp/public/707/cisco-sa-20060419-wlse.shtml
Affected Products
=================
Vulnerable Products
+------------------
A CiscoWorks Wireless LAN Solution Engine (WLSE) or WLSE Express
running any version of software prior to 2.13 are vulnerable to both
of these vulnerabilities.
Several other Cisco products are affected only by the local privilege
escalation vulnerability, including Cisco Hosting Solution Engine
(HSE), User Registration Tool (URT), Cisco Ethernet Subscriber
Solution Engine (ESSE) and CiscoWorks2000 Service Management
Solution. A separate Cisco Security Response has been published
regarding the impact and the fixes on these products and can be found
at http://www.cisco.com/warp/public/707/cisco-sr-20060419-priv.shtml
Products Confirmed Not Vulnerable
+--------------------------------
No other Cisco products are affected by both of these
vulnerabilities.
Details
=======
CiscoWorks WLSE is a centralized, systems-level application for
managing and controlling an entire autonomous Cisco WLAN
infrastructure.
Two vulnerabilities exist in the WLSE appliance that may allow an
attacker to gain complete control of the device or to obtain access
to the underlying operating system.
These issues are documented by the following Cisco bug IDs:
* CSCsc01095 (registered customers only) - Cross site scripting
vulnerability in WLSE appliance web interface
This fix addresses the cross site scripting (XSS) vulnerability
in the WLSE appliance web user interface. By exploiting this
vulnerability, an attacker may obtain the session cookie
information and further use this information to gain
administrative privileges on the system.
* CSCsd21502 (registered customers only) - Privilege escalation to
Linux shell
This fix addresses the local privilege escalation from the
command line interface of the WLSE appliance. By exploiting this
vulnerability an attacker who already has authenticated access to
the command line interface may inject a command to obtain a shell
account on the underlying operating system.
Impact
======
By exploiting these vulnerabilities together, an attacker may obtain
complete control of the WLSE appliance.
Software Version and Fixes
When considering software upgrades, also consult
http://www.cisco.com/go/psirt and any subsequent advisories to
determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the
devices to be upgraded contain sufficient memory and that current
hardware and software configurations will continue to be supported
properly by the new release. If the information is not clear, contact
the Cisco Technical Assistance Center ("TAC") or your contracted
maintenance provider for assistance.
These vulnerabilities are fixed in the 2.13 version of WLSE software.
Fixed software can be downloaded from the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/wlan-sol-eng
Workarounds
===========
There are no workarounds for these vulnerabilities.
Obtaining Fixed Software
Cisco will make free software available to address this vulnerability
for affected customers. This advisory will be updated as fixed
software becomes available. Prior to deploying software, customers
should consult their maintenance provider or check the software for
feature set compatibility and known issues specific to their
environment.
Customers may only install and expect support for the feature sets
they have purchased. By installing, downloading, accessing or
otherwise using such software upgrades, customers agree to be bound
by the terms of Cisco's software license terms found at
http://www.cisco.com/public/sw-license-agreement.html , or as
otherwise set forth at Cisco.com Downloads at
http://www.cisco.com/public/sw-center/sw-usingswc.shtml.
Do not contact either "[email protected]" or "[email protected]"
for software upgrades.
Customers with Service Contracts
+-------------------------------
Customers with contracts should obtain upgraded software through
their regular update channels. For most customers, this means that
upgrades should be obtained through the Software Center on Cisco's
worldwide website at http://www.cisco.com .
Customers using Third Party Support Organizations
+------------------------------------------------
Customers whose Cisco products are provided or maintained through
prior or existing agreement with third-party support organizations
such as Cisco Partners, authorized resellers, or service providers
should contact that support organization for guidance and assistance
with the appropriate course of action in regards to this advisory.
The effectiveness of any workaround or fix is dependent on specific
customer situations such as product mix, network topology, traffic
behavior, and organizational mission. Due to the variety of affected
products and releases, customers should consult with their service
provider or support organization to ensure any applied workaround or
fix is the most appropriate for use in the intended network before it
is deployed.
Customers without Service Contracts
+----------------------------------
Customers who purchase direct from Cisco but who do not hold a Cisco
service contract and customers who purchase through third-party
vendors but are unsuccessful at obtaining fixed software through
their point of sale should get their upgrades by contacting the Cisco
Technical Assistance Center (TAC). TAC contacts are as follows.
* +1 800 553 2447 (toll free from within North America)
* +1 408 526 7209 (toll call from anywhere in the world)
* e-mail: [email protected]
Have your product serial number available and give the URL of this
notice as evidence of your entitlement to a free upgrade. Free
upgrades for non-contract customers must be requested through the
TAC.
Refer to http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
for additional TAC contact information, including special localized
telephone numbers and instructions and e-mail addresses for use in
various languages.
Exploitation and Public Announcements
The Cisco PSIRT is not aware of malicious use of the vulnerability
described in this advisory.
This vulnerability was reported to Cisco by Adam Pointon of
Assurance.Com.Au. We would like to thank Adam Pointon for bringing
this to our attention.
Status of this Notice: FINAL
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY
KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE
INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS
AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS
DOCUMENT AT ANY TIME.
A stand-alone copy or Paraphrase of the text of this document that
omits the distribution URL in the following section is an
uncontrolled copy, and may lack important information or contain
factual errors.
Distribution
============
This advisory is posted on Cisco's worldwide website at :
http://www.cisco.com/warp/public/707/cisco-sa-20060419-wlse.shtml
In addition to worldwide web posting, a text version of this notice
is clear-signed with the Cisco PSIRT PGP key and is posted to the
following e-mail and Usenet news recipients.
* [email protected]
* [email protected]
* [email protected]
* [email protected]
* [email protected]
* [email protected]
* [email protected]
* [email protected]
Future updates of this advisory, if any, will be placed on Cisco's
worldwide website, but may or may not be actively announced on
mailing lists or newsgroups. Users concerned about this problem are
encouraged to check the above URL for any updates.
Revision History
================
+---------------------------------------+
| Revision | | Initial |
| 1.0 | 2006-April-19 | public |
| | | release. |
+---------------------------------------+
Cisco Security Procedures
Complete information on reporting security vulnerabilities in Cisco
products, obtaining assistance with security incidents, and
registering to receive security information from Cisco, is available
on Cisco's worldwide website at
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html.
This includes instructions for press inquiries regarding Cisco
security notices. All Cisco security advisories are available at
http://www.cisco.com/go/psirt.
- ---------------------------------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
iD8DBQFERlGd8NUAbBmDaxQRAjfdAJ465ngY8EKVsK8z3bHzDds0AFta4ACgoRiU
3Afqba8b/AZczXM1Z7Llju8=
=v0HZ
-----END PGP SIGNATURE-----
