Date: Fri, 21 Jan 2000 09:31:38 -0500
From: root <saintjon@SYSCONN.COM.>
To: [email protected]Subject: Vulnerabilities in Checkpoint FW-1 version 3.x and maybe 4.x
There are two vulnerabilities in FW-1. The first is an authentication
issue, the other is a configuration issue. Since I don't have a copy
of 4.x FW-1 handy maybe someone can check it for me.
#1
The basic authentication used in Checkpoint FW-1 used for
inside/outbound and outside/inbound allows unlimited attempts to
authenticate without a timeout or disconnect between unsuccessful
attempts. To make matters worse, the attempt at authentication will let
you know if you have the wrong username before you are allowed to enter
in the passsword.
The exploit is trivial, grind away at user names until you hit one that
works and then grind away at passwords with the username you just found
until you find one that works.
For an example of this, set authentication on the FW-1 software to
authenticate telnet connections. Telent to a destination past the
firewall, when prompted for a username, pound away. A script could
crack the authentication in a very short time.
The workaround is to use Checkpoint's encrypted authentication program
"SecuRemote" and not allow clear text authentication (browser based,
telnet, etc.) to destinations beyond the firewall.
#2
The default configuration in FW-1 allows for rlogin management of the
server. The rlogin prompt is avaialable on all NICs. Unless a rule is
placed in your ruleset to drop or reject all connections to the
firewall, the authentication problem above can be used to remotely
administer someone elses firewall without them knowing.
The workaround is to include the rule.
