The OpenNET Project
 
Search (keywords):  SOFT ARTICLES TIPS & TRICKS SECURITY
LINKS NEWS MAN DOCUMENTATION


IRIX 6.4 ioconfig(1M) and disk_bandwidth(1M) Vulnerability


<< Previous INDEX Search src Set bookmark Go to bookmark Next >>
Date: Mon, 20 Jul 1998 15:54:05 -0700
From: SGI Security Coordinator <[email protected]>
To: [email protected]
Subject: IRIX 6.4 ioconfig(1M) and disk_bandwidth(1M) Vulnerability

DISTRIBUTION RESTRICTIONS - NONE - FOR PUBLIC RELEASE

-----BEGIN PGP SIGNED MESSAGE-----

______________________________________________________________________________
                Silicon Graphics Inc. Security Advisory

        Title:   IRIX 6.4 ioconfig(1M) and disk_bandwidth(1M) Vulnerability
        Number:  19980701-01-P
        Date:    July 20, 1998
_____________________________________________________________________________

Silicon Graphics provides this information freely to the SGI user community
for its consideration, interpretation, implementation and use.   Silicon
Graphics recommends that this information be acted upon as soon as possible.

Silicon Graphics provides the information in this Security Advisory on
an "AS-IS" basis only, and disclaims all warranties with respect thereto,
express, implied or otherwise, including, without limitation, any warranty
of merchantability or fitness for a particular purpose.  In no event shall
Silicon Graphics be liable for any loss of profits, loss of business, loss
of data or for any indirect, special, exemplary, incidental or consequential
damages of any kind arising from your use of, failure to use or improper
use of any of the instructions or information in this Security Advisory.
______________________________________________________________________________

- ------------------------
- ---- Issue Specifics ---
- ------------------------

The IRIX ioconfig(1M) program assigns logical controller numbers to all I/O
devices on a Silicon Graphics Origin or Onyx2 system.

The IRIX disk_bandwidth(1M) program is used to determine the number of I/O
operations that can be performed on a given disk device on an Origin or Onyx2
system.

Both programs are normally only used by IRIX System administrators.

Unfortunately, a vulnerability has been discovered in both ioconfig(1M) and
disk_bandwidth(1M) programs that can lead to a root compromise of the system.

Silicon Graphics Inc. has investigated the issue and recommends the
following steps for neutralizing the exposure.  It is HIGHLY RECOMMENDED
that these measures be implemented on ALL vulnerable SGI systems.  This
issue will be corrected in future releases of IRIX.


- ---------------
- ---- Impact ---
- ---------------

The ioconfig(1M)/disk_bandwidth(1M) programs are installed by default on all
IRIX 6.4 S2MP Origin and Onyx2 systems.

A local user account on the vulnerable system is required in order to
exploit the ioconfig(1M)/disk_bandwidth(1M) vulnerability locally and remotely.

This vulnerability has been publically discussed in Usenet newsgroups
and mailing lists.


- -----------------
- ---- Solution ---
- -----------------

The steps below can be used to remove the vulnerability by restricting
permissions of the ioconfig(1M)/disk_bandwidth(1M) programs to the root user.



     1) Become the root user on the system.

           % /bin/su -
           Password:
           #


     2) Verify the vulnerable ioconfig(1M)/disk_bandwidth(1M) programs
        are installed. Only IRIX 6.4 S2MP for Origin/Onyx2 is vulnerable.

           # uname -R
           6.4 S2MP+OCTANE


     3) Remove permissions on the vulnerable ioconfig(1M) and
        disk_bandwidth(1M) programs.

           # /bin/chmod 500 /sbin/ioconfig
           # /bin/chmod 500 /sbin/disk_bandwidth

                           ************
                           *** NOTE ***
                           ************

            Removing permissions from the vulnerable programs will
            prevent non-root users from accessing ioconfig(1M) and
            disk_bandwidth(1M).


     4) Verify the new permissions on the program.
        Note that the program size may be different depending on release.

              # ls -al /sbin/ioconfig /usr/sbin/disk_bandwidth
              -r-x------    1 root sys   34024 Feb 20 16:53 ioconfig
              -r-x------    1 root sys   17604 Dec 18  1997 disk_bandwidth


     5) Return to previous user level.

                # exit
                %


- -------------------------
- ---- Acknowledgments ---
- -------------------------

Silicon Graphics wishes to thank the Internet community at large for their
assistance in this matter.


- ------------------------------------------------------------
- ---- Silicon Graphics Inc. Security Information/Contacts ---
- ------------------------------------------------------------

If there are questions about this document, email can be sent to
[email protected].

                      ------oOo------

Silicon Graphics provides security information and patches for
use by the entire SGI community.  This information is freely
available to any person needing the information and is available
via anonymous FTP and the Web.

The primary SGI anonymous FTP site for security information and patches
is sgigate.sgi.com (204.94.209.1).  Security information and patches
are located under the directories ~ftp/security and ~ftp/patches,
respectively. The Silicon Graphics Security Headquarters Web page is
accessible at the URL http://www.sgi.com/Support/security/security.html.

For issues with the patches on the FTP sites, email can be sent to
[email protected].

For assistance obtaining or working with security patches, please
contact your SGI support provider.

                      ------oOo------

Silicon Graphics provides a free security mailing list service
called wiretap and encourages interested parties to self-subscribe
to receive (via email) all SGI Security Advisories when they are
released. Subscribing to the mailing list can be done via the Web
(http://www.sgi.com/Support/security/wiretap.html) or by sending email
to SGI as outlined below.

% mail [email protected]
subscribe wiretap <YourEmailAddress>
end
^d

In the example above, <YourEmailAddress> is the email address that you
wish the mailing list information sent to.  The word end must be on a
separate line to indicate the end of the body of the message. The
control-d (^d) is used to indicate to the mail program that you are
finished composing the mail message.


                      ------oOo------

Silicon Graphics provides a comprehensive customer World Wide Web site.
This site is located at http://www.sgi.com/Support/security/security.html.

                      ------oOo------

For reporting *NEW* SGI security issues, email can be sent to
[email protected] or contact your SGI support provider.  A
support contract is not required for submitting a security report.

______________________________________________________________________________
  This information is provided freely to all interested parties and may
  be redistributed provided that it is not altered in any way, Silicon
  Graphics is appropriately credited and the document retains and
  includes its valid PGP signature.


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNbPJCLQ4cFApAP75AQGkPQP/baaHH5TYuMzJCkyj1ZyaMb2onb6wOQ1B
fearTK4dWE+mJ3G72V3TpPwPu4DJYKSs/xdGlaeW7bWB505efj6mQdY97L3+B0SI
9HbdsS4pyHMPTeVJH+pjh/wr9mD81elaNgzvXVMIBsUNb/8Xz8wrFJjSikPQWgmo
y6JaCXW48jk=
=3ID2
-----END PGP SIGNATURE-----

<< Previous INDEX Search src Set bookmark Go to bookmark Next >>



Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру