OpenForum RSS: �� eth0

�� eth0 (Viktor)

Wed, 14 Dec 2011 06:50:46 GMT

>[�� ]
>>>
>>>I have it set as: static WEP, 128bit, auto, 13 chars.
>>>What do you mean by "enc key is off"? The other machine
>>>works fine with the router setting.
>>
>> ��
>>http://www.howtoforge.com/creating-the-sis191-gigabit-ethernet-driver-on-linux-2.6
>>
>>�� . ��
>>��

�� ifcfg-eth0 ��
HWADDR=��-��

�� eth0 (play_off)

Wed, 22 Jul 2009 09:29:26 GMT

>[�� ]
>>
>>I have it set as: static WEP, 128bit, auto, 13 chars.
>>What do you mean by "enc key is off"? The other machine
>>works fine with the router setting.
>
> ��
>http://www.howtoforge.com/creating-the-sis191-gigabit-ethernet-driver-on-linux-2.6
>
>�� . ��
>��

�� .

�� eth0 (play_off)

Wed, 22 Jul 2009 09:28:56 GMT

>[�� ]
>
>_________________________________________________________________
>
>Thank you very much. I disabled the encyption key of my router,
>then it works!
>But I don't understand why my Fedora don't like the WEP encryption.
>
>I have it set as: static WEP, 128bit, auto, 13 chars.
>What do you mean by "enc key is off"? The other machine
>works fine with the router setting.

��
http://www.howtoforge.com/creating-the-sis191-gigabit-ethernet-driver-on-linux-2.6

�� . ��
��

�� eth0 (atomiczzz)

Tue, 21 Jul 2009 11:44:35 GMT

�� eth0:0 - є�� ;)
�� ifconfig-a

�� №2, ��
Hello, there,

I have a laptop running Fedora 4(i386). It worked well with two institution wireless network(access points in my school).
They are both MAC listed and one is also encryption enabled.
Recently I installed DSL and wireless router in my apartment. This worked fine with two windows machines. It also worked fine with my linux laptop if I use ethernet cable.

I set WEP key in /etc/sysconfig/network-scripts/ifcfg-ath0 as KEY=abcd123456789.
This is the same syntax I used for the network at school.
Then when bring the network up by /etc/init.d/network start as root, I get error messages:

Error for wireless request "Set Encode" (8B2A) :
SET failed on device ath0 ; Invalid argument.

I googled quite a while, but no solution yet.

One thing is if I do: KEY="s:abcd123456789" in ifcfg-ath0. The error message is gone.
But it will hang at the ste

�� eth0 (play_off)

Tue, 21 Jul 2009 05:43:54 GMT

>� �� dmesg | grep eth

��

# dmesg | grep eth (�� )
#

� �� eth0 �� aias eth0 e1000 �� ???

�� eth0 (angra)

Tue, 21 Jul 2009 02:39:55 GMT

� �� dmesg | grep eth �� .

�� eth0 (play_off)

Mon, 20 Jul 2009 11:35:02 GMT

>>>�� . � �� . ��
>>>�� . �� eth0 ��
>>
>>� �� ??? ( :) � ��
>>�� )
>
>�� !!!!!!! ��.

�� ??? �� . �� virbr0 � xendr0 �� .

�� eth0 (play_off)

Mon, 20 Jul 2009 11:29:28 GMT

>>�� . � �� . ��
>>�� . �� eth0 ��
>
>� �� ??? ( :) � ��
>�� )

�� !!!!!!! ��.

�� eth0 (sergicus)

Mon, 20 Jul 2009 07:18:37 GMT

>�� . � �� . ��
>�� . �� eth0 ��

� �� ??? ( :) � �� )

OpenForum RSS: �� �������� ������������ �������� eth0

�� �������� ������������ �������� eth0 (Viktor)

�� �������� ������������ �������� eth0 (play_off)

�� �������� ������������ �������� eth0 (play_off)

�� �������� ������������ �������� eth0 (atomiczzz)

�� �������� ������������ �������� eth0 (play_off)

�� �������� ������������ �������� eth0 (angra)

�� �������� ������������ �������� eth0 (play_off)

�� �������� ������������ �������� eth0 (play_off)

�� �������� ������������ �������� eth0 (sergicus)

OpenForum RSS: �� eth0

�� eth0 (Viktor)

�� eth0 (play_off)

�� eth0 (play_off)

�� eth0 (atomiczzz)

�� eth0 (play_off)

�� eth0 (angra)

�� eth0 (play_off)

�� eth0 (play_off)

�� eth0 (sergicus)