https://www.opennet.me/openforum/vsluhforumID1/97172.html После перезагрузке Proxmox 5.1 не создаются интерфейсы bond0, vmbr1,vlan14 openvSwitch. Подписка бесплатная. Службы стартуют. Может знает в чем может быть проблемы?<br><br>[code]<br>root@pve:/etc/openvswitch# ovs-vsctl show<br>20742468-58ea-4cad-9dd4-88d72a1ac0e7<br> ovs_version: "2.7.0"<br>[/code]<br><br><br>Конфиг /etc/network/interfaces:<br><br>[code]<br><br>auto lo<br>iface lo inet loopback<br><br>iface eth0 inet manual<br>#1 port switch<br><br>iface eth2 inet manual<br><br>iface eth3 inet manual<br><br>iface eth1 inet manual<br><br>allow-vmbr1 bond0<br>iface bond0 inet manual<br> ovs_bonds eth1 eth2<br> ovs_type OVSBond<br> ovs_bridge vmbr1<br> ovs_options lacp=active bond_mode=balance-tcp<br><br> auto vmbr0<br> iface vmbr0 inet static<br> address 10.60.14.107<br> netmask 255.255.255.0<br> gateway 10.60.14.254<br> bridge_ports eth0<br> bridge_stp off<br> bridge_fd 0<br><br>auto vmbr1<br>iface vmbr1 inet manual<br> ovs_type OVSBridge<br> ovs_ports bond0 vlan14<br> ovs_options trunks=18<br><br>allow-vm https://www.opennet.me/openforum/vsluhforumID1/97172.html#1 Tue, 10 Apr 2018 06:47:55 GMT &gt;[оверквотинг удален]<br>&gt; [code] <br>&gt; iface eth2 inet manual <br>&gt; iface eth1 inet manual <br>&gt; allow-vmbr1 bond0 <br>&gt; iface bond0 inet manual <br>&gt; ovs_bonds eth1 eth2 <br>&gt; ovs_type OVSBond <br>&gt; ovs_bridge vmbr1 <br>&gt; ovs_options lacp=active bond_mode=balance-tcp <br>&gt; [/code] <br><br>NOTE: The interfaces that are part of a bond do not need to have their own configuration section. <br>Не это?<br>попробуй убрать из конфига<br>iface eth1 inet manual<br>iface eth2 inet manual<br>