Исходное сообщение
"Страм FreeBSD PPPOE...." Отправлено kww, 27-Апр-05 13:41
>vpn: > set device 192.168.0.1:1723/tcp > set dial > set login > set timeout 0 > set authname chris > set authkey ghjnjnbg > set ifaddr  0       0 > > add default HISADDR > >такая же история... у меня вот так работает, у прова mpd+radius 128bit MS-шифрование mpd.conf default:     load vpn vpn:     new -i ng0 vpn vpn     set iface disable on-demand     set iface addrs #    set iface idle 0 # disconnect the client after 8 hours     set iface session 28800     set iface route default #    set bundle disable multilink     set bundle authname "UserName"     set bundle password "hfxdfghjkl"     set link yes acfcomp protocomp     set link yes chap     set link mtu 1492     set link mru 1492 # If remote machine is NT you need this..     set link enable no-orig-auth     set link keep-alive 10 75     set ipcp yes vjcomp # The five lines below enable Microsoft Point-to-Point encryption # (MPPE) using the ng_mppc(8) netgraph node type.     set bundle enable compression     set ccp yes mppc     set ccp yes mpp-e40     set ccp yes mpp-e128     set bundle enable crypt-reqd     set ccp yes mpp-stateless     open mpd.links vpn:         set link type pptp         set pptp peer 192.168.127.254         set pptp enable originate