Исходное сообщение
"Помогите включить hypertraiding" Отправлено Andrew, 17-Мрт-09 07:36
Привет всем. Есть вот такая мать ASUS P4B revision 1008 Вот, что про ее bios говорит dmidecode bash-3.1# dmidecode -t 0 # dmidecode 2.9 SMBIOS 2.3 present. Handle 0x0000, DMI type 0, 20 bytes BIOS Information         Vendor: Award Software, Inc.         Version: ASUS P4B ACPI BIOS Revision 1008         Release Date: 12/26/2001         Address: 0xF0000         Runtime Size: 64 kB         ROM Size: 256 kB         Characteristics:                 PCI is supported                 PNP is supported                 APM is supported                 BIOS is upgradeable                 BIOS shadowing is allowed                 ESCD support is available                 Boot from CD is supported                 Selectable boot is supported                 BIOS ROM is socketed                 EDD is supported                 5.25"/360 KB floppy services are supported (int 13h)                 5.25"/1.2 MB floppy services are supported (int 13h)                 3.5"/720 KB floppy services are supported (int 13h)                 3.5"/2.88 MB floppy services are supported (int 13h)                 Print screen service is supported (int 5h)                 8042 keyboard services are supported (int 9h)                 Serial services are supported (int 14h)                 Printer services are supported (int 17h)                 CGA/mono video services are supported (int 10h)                 ACPI is supported                 USB legacy is supported                 AGP is supported Еа эту мать установлен проу pentium 4 Вот что про него говорит тот же dmidecode bash-3.1# dmidecode -t 4 # dmidecode 2.9 SMBIOS 2.3 present. Handle 0x0004, DMI type 4, 32 bytes Processor Information         Socket Designation: PGA 478         Type: Central Processor         Family: Pentium 4         Manufacturer: GenuineIntel         ID: 12 0F 00 00 FF FB EB 3F         Signature: Type 0, Family 15, Model 1, Stepping 2         Flags:                 FPU (Floating-point unit on-chip)                 VME (Virtual mode extension)                 DE (Debugging extension)                 PSE (Page size extension)                 TSC (Time stamp counter)                 MSR (Model specific registers)                 PAE (Physical address extension)                 MCE (Machine check exception)                 CX8 (CMPXCHG8 instruction supported)                 APIC (On-chip APIC hardware supported)                 SEP (Fast system call)                 MTRR (Memory type range registers)                 PGE (Page global enable)                 MCA (Machine check architecture)                 CMOV (Conditional move instruction supported)                 PAT (Page attribute table)                 PSE-36 (36-bit page size extension)                 CLFSH (CLFLUSH instruction supported)                 DS (Debug store)                 ACPI (ACPI supported)                 MMX (MMX technology supported)                 FXSR (Fast floating-point save and restore)                 SSE (Streaming SIMD extensions)                 SSE2 (Streaming SIMD extensions 2)                 SS (Self-snoop)                 HTT (Hyper-threading technology)                 TM (Thermal monitor supported)         Version: Intel(R) Pentium(R) 4         Voltage: 1.7 V         External Clock: 100 MHz         Max Speed: 2400 MHz         Current Speed: 1600 MHz         Status: Populated, Enabled         Upgrade: ZIF Socket         L1 Cache Handle: 0x0009         L2 Cache Handle: 0x000A         L3 Cache Handle: Not Provided bash-3.1# Тоесть камень поддерживает ht, а биос про него ничего не знает. Загрузил ядро с smp. Передал явные параметры  append = "acpismp=force acpi=ht" но все равно вижу в системе только один процессор. Вопрос такой если я обновлю биос до текущей версии на сайте asus  - 1013 (у меня установлена сейчас 1008) то возможно ли появление htt или это "в морг"? Спасибо.