Исходное сообщение
"Шейпре на Cisco" Отправлено Cyrill Malevanov, 24-Июл-08 12:45
>[оверквотинг удален] >>> >> >>Cisco 6500/sup32 >>Cisco 6500/sup720 >>Cisco 7600/sup32 >>Cisco 7600/sup720 >>Cisco 7600/rsp720 >>Cisco ME6524 > >И как такое сделать ? User-Based Rate Limiting (UBRL) on the Cisco Catalyst 6500 Supervisor Engine 32 and Cisco Catalyst 6500 Series Supervisor Engine 720 with Cisco IOS Software Only User-Based Rate Limiting functionality is supported only on the Cisco Catalyst 6500 Supervisor Engine 32 and Cisco Catalyst 6500 Series Supervisor Engine 720 and is a microflow policing function which provides a means to rate limit many source or destination IP addresses to an individual rate. This configuration requires only two ACLs and can support a large number of users. Only supported in Cisco IOS Software, the example below demonstrates UBRL by rate limiting traffic from each user in a user-group to 1 Mbps each, going to the subnet 192.168.0.0/16: Access-list 101 permit ip any 192.168.0.0 0.0.255.255 Class-map 1Mbps-rate Match access-group 101 Policy-map Outbound Class 1Mbps-rate Police flow mask src-only 1000000 ... Int gig 3/1 Service-policy input Outbound подробности на Cisco.com по ключевому слову Configuring UBRL