>сталкивался с такой фигней на этом коммутаторе, пытался свич 3com гигабитным портом
>соединить с гиг портом этой кошки, только сотня и все тут,
>а циско-циско на гиге, мне кажется дело в сетевой карте компа,
>попробуй несколько сетевых, так же попробуй свежую прошивку для кошки. Может быть, просто где-нить косяк?
С одной стороны des-3326sr с модулем DES-132T
25 Enabled Auto/Enabled 1000M/Full/None Enabled
С другой стороны Cisco2950T
Cisco2950-Len19#sh int gi0/1
GigabitEthernet0/1 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 0008.a440.f319 (bia 0008.a440.f319)
Description: link
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 20/255, rxload 13/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is RJ45
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 3d20h, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
порты с обоих сторон не настроены - "автомат", свитчи соединены прямым патч-кордом 1:1.