Исходное сообщение
"Не видит wi-fi cisco aironet 1100" Отправлено father, 12-Ноя-09 08:52
При команде "show ip interface brief" Dot11Radio0 unassigned YES NVRAM reset down В следствии нет wi-fi, где может быть ошибка no logging console enable secret 5 111111111111111111111111111 ! ip subnet-zero ! ! aaa new-model ! ! aaa session-id common ! dot11 ssid PMT-Fortum    vlan 32    authentication open    authentication key-management wpa    guest-mode    wpa-psk ascii 7 02222222222222222222222 ! username admin privilege 15 password 7 parol ! bridge irb ! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 32 mode ciphers aes-ccm tkip ! ssid PMT-Fortum ! speed basic-11.0 24.0 36.0 48.0 54.0 channel 2437 station-role root rts threshold 2312 bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface FastEthernet0 no ip address no ip route-cache duplex auto speed auto ! interface FastEthernet0.1 encapsulation dot1Q 32 no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface FastEthernet0.2 encapsulation dot1Q 1 native ip address 10.0.2.54 255.255.255.0 no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface BVI1 ip address 10.1.5.100 255.255.255.0 no ip route-cache ! ip default-gateway 10.0.2.1 no ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag ip radius source-interface BVI1 ! bridge 1 route ip !

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, [email protected] (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> При команде "show ip interface brief" > Dot11Radio0 unassigned YES NVRAM reset down > В следствии нет wi-fi, где может быть ошибка > no logging console > enable secret 5 111111111111111111111111111 > ! > ip subnet-zero > ! > ! > aaa new-model > ! > ! > aaa session-id common > ! > dot11 ssid PMT-Fortum > vlan 32 > authentication open > authentication key-management wpa > guest-mode > wpa-psk ascii 7 02222222222222222222222 > ! > username admin privilege 15 password 7 parol > ! > bridge irb > ! > interface Dot11Radio0 > no ip address > no ip route-cache > ! > encryption vlan 32 mode ciphers aes-ccm tkip > ! > ssid PMT-Fortum > ! > speed basic-11.0 24.0 36.0 48.0 54.0 > channel 2437 > station-role root > rts threshold 2312 > bridge-group 1 > bridge-group 1 subscriber-loop-control > bridge-group 1 block-unknown-source > no bridge-group 1 source-learning > no bridge-group 1 unicast-flooding > bridge-group 1 spanning-disabled > ! > interface FastEthernet0 > no ip address > no ip route-cache > duplex auto > speed auto > ! > interface FastEthernet0.1 > encapsulation dot1Q 32 > no ip route-cache > bridge-group 1 > no bridge-group 1 source-learning > bridge-group 1 spanning-disabled > ! > interface FastEthernet0.2 > encapsulation dot1Q 1 native > ip address 10.0.2.54 255.255.255.0 > no ip route-cache > bridge-group 1 > no bridge-group 1 source-learning > bridge-group 1 spanning-disabled > ! > interface BVI1 > ip address 10.1.5.100 255.255.255.0 > no ip route-cache > ! > ip default-gateway 10.0.2.1 > no ip http server > no ip http secure-server > ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag > ip radius source-interface BVI1 > ! > bridge 1 route ip > !
	Введите код, изображенный на картинке: