Исходное сообщение
"MRTG" Отправлено laa, 29-Мрт-05 19:24
Очень хочется запихнуть Controller E1-0 в MRTG, но при создании mrtg.cfg происходит следующее: ### Interface 8 >> Descr: 'E1-0' | Name: 'E1 0' | Ip: '' | Eth: '' ### ### The following interface is commented out because: ### * it is a DS1 controllers ### * got 'Received SNMP response with error code ###       error status: noSuchName ###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.8) ###     SNMPv1_Session (remote host: "x.x.x.x" [x.x.x.x].161) ###                       community: "public" ###                      request ID: -423974374 ###                     PDU bufsize: 8000 bytes ###                         timeout: 2s ###                         retries: 5 ###                         backoff: 1)' from interface when trying to query # # Target[x.x.x.x_8]: 8:public@x.x.x.x: # SetEnv[x.x.x.x_8]: MRTG_INT_IP="" MRTG_INT_DESCR="E1-0" # MaxBytes[x.x.x.x_8]: 256000 # Title[x.x.x.x_8]: Traffic Analysis for 8 -- c5300 # PageTop[x.x.x.x_8]: <H1>Traffic Analysis for 8 -- c5300</H1> #  <TABLE> #    <TR><TD>System:</TD>     <TD>c5300 in </TD></TR> #    <TR><TD>Maintainer:</TD> <TD></TD></TR> #    <TR><TD>Description:</TD><TD>E1-0  </TD></TR> #    <TR><TD>ifType:</TD>     <TD>ds1 (18)</TD></TR> #    <TR><TD>ifName:</TD>     <TD>E1 0</TD></TR> #    <TR><TD>Max Speed:</TD>  <TD>256.0 kBytes/s</TD></TR> #  </TABLE> Подскажите как побороть данную ситуацию?