Исходное сообщение
"C2821 нужна фича match vlan command in class-map " Отправлено Алексей, 30-Янв-06 18:00
Вот это я нашел в документе Cisco IOS Wireless LAN Commands match vlan To define the VLAN match criteria, use the match vlan command in class-map configuration mode. To remove the match criteria, use the no form of this command. match vlan {vlan-id | vlan-range | vlan-combination} no match vlan Syntax Description vlan-id The VLAN identification number. Valid range is from 1 to 4094; do not enter leading zeros. vlan-range A VLAN range. For example, 1 - 3. vlan-combination A combination of VLANs. For example, 1 - 3 5 - 7. Command Default No default behavior or values. Command Modes Class-map configuration Command History Release  Modification   12.2(4)JA This command was introduced. 12.4(2)T This command was integrated into Cisco IOS Release 12.4(2)T. Usage Guidelines Use the match vlan command to specify which fields in the incoming packets are examined to classify the packets. Only the IP access group or the MAC access group matching the Ether Type/Len field are supported. Examples The following example shows how to classify traffic by VLAN: Router(config-cmap)# match vlan 2 Короче нужен IOS с поддержкой данной функции, но для Cisco 2821. Причем я даже не знаю имеется ли таковой для данной железяки... Всем заранее спасибо за ссылки или комметарии.