Добрый день
поставил slackware 12 на ноутбук fsc amillo pi 2515 на чипсете 965gm, всё работает, но отсутствует direct rendering; все нужные модули грузятся i915, dri, agp_gart, но в логах - режим не включается;
если кто сталкивался с подобными проблемами - напишите;
С уважением Эриллоги
Xorg.0
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux darkstar 2.6.21.5 #1 SMP Sat Apr 12 21:13:45 EEST 2008 i686
Build Date: 09 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 15 23:25:16 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** Intel i810 (generic) [i810]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/lib/X11/fonts/misc/,
/usr/lib/X11/fonts/75dpi/:unscaled,
/usr/lib/X11/fonts/100dpi/:unscaled,
/usr/lib/X11/fonts/Speedo/,
/usr/lib/X11/fonts/Type1/,
/usr/lib/X11/fonts/TTF/,
/usr/lib/X11/fonts/OTF/,
/usr/lib/X11/fonts/cyrillic/,
/usr/lib/X11/fonts/75dpi/,
/usr/lib/X11/fonts/100dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dcd60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 1734,1108 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2a02 card 1734,1108 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2a03 card 1734,1108 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1a:0: chip 8086,2834 card 1734,1108 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 1734,1108 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 1734,1108 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2843 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 1734,1108 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 1734,1108 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 1734,1108 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2815 card 1734,1108 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 1734,1108 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 1734,1108 rev 03 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,283e card 1734,1108 rev 03 class 0c,05,00 hdr 00
(II) PCI: 04:00:0: chip 8086,4222 card 8086,1001 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:00:0: chip 10ec,8136 card 1734,1108 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,8), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf6000000 - 0xf7ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:28:3), (0,6,7), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0xf4000000 - 0xf5ffffff (0x2000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:30:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation Mobile Integrated Graphics Controller rev 3, Mem @ 0xfc000000/20, 0xd0000000/28, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile Integrated Graphics Controller rev 3, Mem @ 0xfc100000/20
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xfa000000 - 0xfa000fff (0x1000) MX[B]
[1] -1 0 0xf8000000 - 0xf8000fff (0x1000) MX[B]
[2] -1 0 0x88000000 - 0x880000ff (0x100) MX[B]
[3] -1 0 0xfc404000 - 0xfc4047ff (0x800) MX[B]
[4] -1 0 0xfc404c00 - 0xfc404fff (0x400) MX[B]
[5] -1 0 0xfc400000 - 0xfc403fff (0x4000) MX[B]
[6] -1 0 0xfc404800 - 0xfc404bff (0x400) MX[B]
[7] -1 0 0xfc100000 - 0xfc1fffff (0x100000) MX[B](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[9] -1 0 0xfc000000 - 0xfc0fffff (0x100000) MX[B](B)
[10] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[11] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[12] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[13] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[B]
[14] -1 0 0x000018d8 - 0x000018df (0x8) IX[B]
[15] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[B]
[16] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[B]
[17] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B]
[23] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfa000000 - 0xfa000fff (0x1000) MX[B]
[1] -1 0 0xf8000000 - 0xf8000fff (0x1000) MX[B]
[2] -1 0 0x88000000 - 0x880000ff (0x100) MX[B]
[3] -1 0 0xfc404000 - 0xfc4047ff (0x800) MX[B]
[4] -1 0 0xfc404c00 - 0xfc404fff (0x400) MX[B]
[5] -1 0 0xfc400000 - 0xfc403fff (0x4000) MX[B]
[6] -1 0 0xfc404800 - 0xfc404bff (0x400) MX[B]
[7] -1 0 0xfc100000 - 0xfc1fffff (0x100000) MX[B](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[9] -1 0 0xfc000000 - 0xfc0fffff (0x100000) MX[B](B)
[10] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[11] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[12] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[13] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[B]
[14] -1 0 0x000018d8 - 0x000018df (0x8) IX[B]
[15] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[B]
[16] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[B]
[17] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B]
[23] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfa000000 - 0xfa000fff (0x1000) MX[B]
[5] -1 0 0xf8000000 - 0xf8000fff (0x1000) MX[B]
[6] -1 0 0x88000000 - 0x880000ff (0x100) MX[B]
[7] -1 0 0xfc404000 - 0xfc4047ff (0x800) MX[B]
[8] -1 0 0xfc404c00 - 0xfc404fff (0x400) MX[B]
[9] -1 0 0xfc400000 - 0xfc403fff (0x4000) MX[B]
[10] -1 0 0xfc404800 - 0xfc404bff (0x400) MX[B]
[11] -1 0 0xfc100000 - 0xfc1fffff (0x100000) MX[B](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfc0fffff (0x100000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[17] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[18] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[19] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[B]
[20] -1 0 0x000018d8 - 0x000018df (0x8) IX[B]
[21] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[B]
[22] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[B]
[23] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[28] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B]
[29] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[30] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[33] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 2.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.2.99.905, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ, 965GM
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 965GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfa000000 - 0xfa000fff (0x1000) MX[B]
[5] -1 0 0xf8000000 - 0xf8000fff (0x1000) MX[B]
[6] -1 0 0x88000000 - 0x880000ff (0x100) MX[B]
[7] -1 0 0xfc404000 - 0xfc4047ff (0x800) MX[B]
[8] -1 0 0xfc404c00 - 0xfc404fff (0x400) MX[B]
[9] -1 0 0xfc400000 - 0xfc403fff (0x4000) MX[B]
[10] -1 0 0xfc404800 - 0xfc404bff (0x400) MX[B]
[11] -1 0 0xfc100000 - 0xfc1fffff (0x100000) MX[B](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfc0fffff (0x100000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[17] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[18] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[19] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[B]
[20] -1 0 0x000018d8 - 0x000018df (0x8) IX[B]
[21] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[B]
[22] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[B]
[23] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[28] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B]
[29] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[30] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[33] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfa000000 - 0xfa000fff (0x1000) MX[B]
[5] -1 0 0xf8000000 - 0xf8000fff (0x1000) MX[B]
[6] -1 0 0x88000000 - 0x880000ff (0x100) MX[B]
[7] -1 0 0xfc404000 - 0xfc4047ff (0x800) MX[B]
[8] -1 0 0xfc404c00 - 0xfc404fff (0x400) MX[B]
[9] -1 0 0xfc400000 - 0xfc403fff (0x4000) MX[B]
[10] -1 0 0xfc404800 - 0xfc404bff (0x400) MX[B]
[11] -1 0 0xfc100000 - 0xfc1fffff (0x100000) MX[B](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfc0fffff (0x100000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[20] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[21] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[22] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[B]
[23] -1 0 0x000018d8 - 0x000018df (0x8) IX[B]
[24] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[B]
[25] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[B]
[26] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[31] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B]
[32] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[33] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[34] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[35] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[36] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFC000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) intel(0): Output VGA using monitor section My Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT Model: 1415 Serial#: 0
(II) intel(0): Year: 2007 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0): CPT
(II) intel(0): CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000e14151400000000
(II) intel(0): 22110103802115780a092d9d564f9027
(II) intel(0): 21505400000001010101010101010101
(II) intel(0): 010101010101ea1a008050200d301820
(II) intel(0): 13004bcf100000190000000f00202020
(II) intel(0): 2020202020206e050f00000000fe0043
(II) intel(0): 50540a202020202020202020000000fe
(II) intel(0): 00434c414131353457423035412000c1
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7616 kB
(II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT Model: 1415 Serial#: 0
(II) intel(0): Year: 2007 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0): CPT
(II) intel(0): CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000e14151400000000
(II) intel(0): 22110103802115780a092d9d564f9027
(II) intel(0): 21505400000001010101010101010101
(II) intel(0): 010101010101ea1a008050200d301820
(II) intel(0): 13004bcf100000190000000f00202020
(II) intel(0): 2020202020206e050f00000000fe0043
(II) intel(0): 50540a202020202020202020000000fe
(II) intel(0): 00434c414131353457423035412000c1
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2 68.90 1280 1304 1336 1408 800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[B]
[1] 0 0 0xfc000000 - 0xfc0fffff (0x100000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xfa000000 - 0xfa000fff (0x1000) MX[B]
[7] -1 0 0xf8000000 - 0xf8000fff (0x1000) MX[B]
[8] -1 0 0x88000000 - 0x880000ff (0x100) MX[B]
[9] -1 0 0xfc404000 - 0xfc4047ff (0x800) MX[B]
[10] -1 0 0xfc404c00 - 0xfc404fff (0x400) MX[B]
[11] -1 0 0xfc400000 - 0xfc403fff (0x4000) MX[B]
[12] -1 0 0xfc404800 - 0xfc404bff (0x400) MX[B]
[13] -1 0 0xfc100000 - 0xfc1fffff (0x100000) MX[B](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[15] -1 0 0xfc000000 - 0xfc0fffff (0x100000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[19] 0 0 0x00001800 - 0x00001807 (0x8) IS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[23] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[24] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B]
[25] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[B]
[26] -1 0 0x000018d8 - 0x000018df (0x8) IX[B]
[27] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[B]
[28] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[B]
[29] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[34] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B]
[35] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[36] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[37] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[38] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[39] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[41] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
large DRI memory manager reservation:
(II) intel(0): Allocating 4032 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00040000-0x01a2ffff: front buffer (26560 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x01a30000-0x01a3ffff: xaa scratch (64 kB)
(II) intel(0): 0x01a40000-0x01e27fff: back buffer (4000 kB)
(II) intel(0): 0x01e28000-0x0220ffff: depth buffer (4000 kB)
(II) intel(0): 0x02210000-0x0420ffff: textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) intel(0): [drm] drmOpen failed
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
29 256x256 slots
10 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a30000 (pgoffset 6704)
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00000010, display A pte
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Failed
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT Model: 1415 Serial#: 0
(II) intel(0): Year: 2007 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0): CPT
(II) intel(0): CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000e14151400000000
(II) intel(0): 22110103802115780a092d9d564f9027
(II) intel(0): 21505400000001010101010101010101
(II) intel(0): 010101010101ea1a008050200d301820
(II) intel(0): 13004bcf100000190000000f00202020
(II) intel(0): 2020202020206e050f00000000fe0043
(II) intel(0): 50540a202020202020202020000000fe
(II) intel(0): 00434c414131353457423035412000c1
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800" 68.90 1280 1304 1336 1408 800 801 804 813 -hsync -vsync
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2 68.90 1280 1304 1336 1408 800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): EDID for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CPT Model: 1415 Serial#: 0
(II) intel(0): Year: 2007 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) intel(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 813 v_border: 0
(II) intel(0): CPT
(II) intel(0): CLAA154WB05A
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000e14151400000000
(II) intel(0): 22110103802115780a092d9d564f9027
(II) intel(0): 21505400000001010101010101010101
(II) intel(0): 010101010101ea1a008050200d301820
(II) intel(0): 13004bcf100000190000000f00202020
(II) intel(0): 2020202020206e050f00000000fe0043
(II) intel(0): 50540a202020202020202020000000fe
(II) intel(0): 00434c414131353457423035412000c1
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800" 68.90 1280 1304 1336 1408 800 801 804 813 -hsync -vsync
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.2 68.90 1280 1304 1336 1408 800 801 804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output TV disconnected
(II) intel(0): EDID for output TV
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.---------------------------------------------------------------------------------------
xorg.conf# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
## **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
FontPath "/usr/lib/X11/fonts/TTF/"
FontPath "/usr/lib/X11/fonts/OTF/"
FontPath "/usr/lib/X11/fonts/cyrillic/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"# The module search path. The default path is shown here.
# ModulePath "/usr/lib/xorg/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.# Option "BaudRate" "9600"
# Option "SampleRate" "150"# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection# **********************************************************************
# Monitor section
# **********************************************************************# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.HorizSync 31.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.VertRefresh 50-70
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** Intel i810 (generic) [i810]"
Driver "i810"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** Intel i810 (generic) [i810]"
Monitor "My Monitor"
DefaultDepth 24Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
Virtual 1600 1280
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024"
ViewPort 0 0
Virtual 1280 800
EndSubsection
EndSection# **********************************************************************
# ServerLayout sections.
# **********************************************************************# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"EndSection
Section "DRI"
Mode 0666
EndSection
>[оверквотинг удален]
>
># intalled.
>
># BusID "PCI:0:10:0"
>
># VideoRam 256
>
># Clocks 25.2 28.3
>
>EndSectionДобрый день, закомментируй строчки которые я оставил, должно помочь.
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSectionблин(, оверквотинг дуратский