Доброго времени суток!
В общем недавно самопроизвольно перезагрузились циски, хочется выяснить причину. Лог с 3660 выглядит следующим образом:

un 27 00:43:57: %BGP-4-VPNV4NH_IF: Nexthop ##.##.110.146 may not be reachable from neigbor ##.##.110.145 - not a loopback
Jun 27 17:14:46: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to down (RAI detected)
Jun 27 17:14:48: %LINK-3-UPDOWN: Interface Serial1/0:0, changed state to down
Jun 27 17:14:48: %OSPF-5-ADJCHG: Process 10, Nbr ##.##.132.8 on Serial1/0:0 from FULL to DOWN, Neighbor Down: Interface down or detached
Jun 27 17:14:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to down
Jun 27 17:17:41: %BGP-5-ADJCHANGE: neighbor ##.##.132.8 Down BGP Notification sent
Jun 27 17:17:41: %BGP-3-NOTIFICATION: sent to neighbor ##.##.132.8 4/0 (hold time expired) 0 bytes
Jun 27 18:03:37: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to up
Jun 27 18:03:39: %LINK-3-UPDOWN: Interface Serial1/0:0, changed state to up
Jun 27 18:03:40: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to up
Jun 27 18:03:49: %OSPF-5-ADJCHG: Process 10, Nbr ##.##.132.8 on Serial1/0:0 from LOADING to FULL, Loading Done
Jun 27 18:04:01: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to down (RAI detected)
Jun 27 18:04:03: %LINK-3-UPDOWN: Interface Serial1/0:0, changed state to down
Jun 27 18:04:03: %OSPF-5-ADJCHG: Process 10, Nbr ##.##.132.8 on Serial1/0:0 from FULL to DOWN, Neighbor Down: Interface down or detached
Jun 27 18:04:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to down
Jun 27 18:06:56: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to up
Jun 27 18:06:58: %LINK-3-UPDOWN: Interface Serial1/0:0, changed state to up
Jun 27 18:06:59: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to up
Jun 27 18:07:08: %OSPF-5-ADJCHG: Process 10, Nbr ##.##.132.8 on Serial1/0:0 from LOADING to FULL, Loading Done
Jun 27 18:07:22: %BGP-5-ADJCHANGE: neighbor ##.##.132.8 Up
Jun 27 18:07:36: %BGP-4-VPNV4NH_IF: Nexthop ##.##.110.146 may not be reachable from neigbor ##.##.110.145 - not a loopback
Jun 27 18:12:36: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to down (RAI detected)
Jun 27 18:12:38: %LINK-3-UPDOWN: Interface Serial1/0:0, changed state to down
Jun 27 18:12:38: %OSPF-5-ADJCHG: Process 10, Nbr ##.##.132.8 on Serial1/0:0 from FULL to DOWN, Neighbor Down: Interface down or detached
Jun 27 18:12:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to down
Jun 27 18:15:24: %BGP-5-ADJCHANGE: neighbor ##.##.132.8 Down BGP Notification sent
Jun 27 18:15:24: %BGP-3-NOTIFICATION: sent to neighbor ##.##.132.8 4/0 (hold time expired) 0 bytes
Jun 27 18:15:26: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to up
Jun 27 18:15:28: %LINK-3-UPDOWN: Interface Serial1/0:0, changed state to up
Jun 27 18:15:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to up
Jun 27 18:15:38: %OSPF-5-ADJCHG: Process 10, Nbr ##.##.132.8 on Serial1/0:0 from LOADING to FULL, Loading Done
Jun 27 18:16:07: %BGP-5-ADJCHANGE: neighbor ##.##.132.8 Up
Jun 27 18:16:28: %BGP-4-VPNV4NH_IF: Nexthop ##.##.110.146 may not be reachable from neigbor ##.##.110.145 - not a loopback

Интересует, может ли remote alarm (RAI) вызвать перезагрузку, или нужно копать в другом месте? Заранее спасибо!