>не могу залить иос во флеш.
>
>rommon 32 > set              
>PS1=rommon ! >              
>ip_address=172.16.2.188
>ip_subnet_mask=255.255.0.0
>default_gateway=172.16.2.1
>tftp_server=172.16.2.229
>?=0
>tftp_file=c2600-i-mz.122-5a
>rommon 33 > tftpdnld                    
>
>Missing or illegal ip address for variable IP_ADDRESS
>Illegal IP address.
>
>usage: tftpdnld [-r]
>  Use this command for disaster recovery only to recover an
>image via TFTP.
>  Monitor variables are used to set up parameters for the
>transfer.
>  (Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
>  "ctrl-c" or "break" stops the transfer before flash erase begins.
>
>
>  The following variables are REQUIRED to be set for tftpdnld:
>
>            
>IP_ADDRESS: The IP address for this unit
>        IP_SUBNET_MASK: The subnet mask
>for this unit
>       DEFAULT_GATEWAY: The default gateway for
>this unit
>           TFTP_SERVER:
>The IP address of the server to fetch from
>            
> TFTP_FILE: The filename to fetch
>
>  The following variables are OPTIONAL:
>          TFTP_VERBOSE: Print
>setting. 0=quiet, 1=progress(default), 2=verbose
>      TFTP_RETRY_COUNT: Retry count for ARP and
>TFTP (default=7)
>          TFTP_TIMEOUT: Overall
>timeout of operation in seconds (default=7200)
>         TFTP_CHECKSUM: Perform checksum
>test on image, 0=no, 1=yes (default=1)
>
>  Command line options:
>   -r: do not write flash, load to DRAM only
>and launch image
>rommon 34 >

Можно еще через xmodem залить. Только это довольно долго...

>Missing or illegal ip address for variable IP_ADDRESS
>Illegal IP address.
большими буквами переменные писать надо